Boxy exsikační

Supplier: Bohlender

These transparent acrylic cabinets have solid 25 mm thick walls, a circular silicone seal and a vacuum gauge (0 to 760 mm of mercury).

Supplier: Bohlender

Aluminium frame with heat-resistant panels made of borosilicate glass 3.3, two compartments and two doors, including four shelves made of stainless steel, two trays and two hygrometers, four casters (two of them with brakes), usable with up to 17 shelves per compartment.

Supplier: Bohlender

Průhledné exsikátory s panely z akrylátového nebo borosilikátovéh skla mají zpevněný hliníkový rám, dokonale těsnící dveře s celoobvodovým gumovým těsněním a magnetickým zámkem. Jsou určeny pro skladování nebo sušení citlivých produktů s využitím silikagelu. Kontrolované vnitřní prostředí je vhodné také pro uložení referenčního materiálu, dlouhodobých vzorků, metalografických vzorků, tabáku a vzorků DNA. Modely Super-Star mohou být plněny inertním plynem, např. dusíkem a využívány pro bezpečné skladování jedovatých chemikálií.

Supplier: Bohlender

PC desiccator cabinet which has reinforced aluminium frame with antistatic acrylic panels and easily readable electronic hygrometer. Mainly used for temporary storage of components for electronic products.

Supplier: Bohlender

Transparent acrylic. Cabinets have a reinforced aluminium frame, door with foam rubber gasket and magnetic strip. Designed for storing or drying humidity sensitive products using silica gel. The controlled environment inside the desiccator is ideal for storing reference materials, retained samples, metallographic specimens, tobacco and DNA samples.

Supplier: Bohlender

Průhledný polykarbonát. Každá komora má jedny dveře se záklopkou a integrované těsnění, které zajišťuje snadné otevírání a těsné uzavření. Vhodné pro práci při teplotách −35 to +70 °C, při normálním tlaku.

Supplier: Bohlender

Aluminium frame with panels made of heat-resistant borosilicate glass 3.3, rear panel made of aluminium, including four shelves made of stainless steel, hygrometer and mounted drying unit, usable with up to 26 shelves, stackable. Electrical power connection 230 V/50 - 60 Hz is required.

Supplier: Bohlender

Aluminium frame with panels made of acrylic glass, including four shelves made of polycarbonate, tray, hygrometer and desiccant, usable with up to 38 shelves, stackable.

Supplier: Bohlender

Aluminium frame, panels made of black acrylic glass prevent light incidence and protect against ultraviolet radiation, high-gloss surfaces, including four shelves made of stainless steel, tray and hygrometer, four casters (two of them with brakes), usable with up to 17 shelves.

Supplier: Palbam

Bench top N₂ purge desiccator cabinets made from stainless steel 304, units have an electropolished finish and static dissipative PVC window. Cabinets cut nitrogen expenses by up to 80%, automate clean, dry benchtop storage eliminating moisture & oxygen related degradation and optimise yields. An appropriate flow of nitrogen is introduced into the upper section of the desiccator; the heavier air is then purged out of the bottom. Ideal for use with semiconductor components, biological and pharmaceutical samples, and other sensitive materials. Fully integrated turnkey system takes 30 s to install.

Supplier: Bohlender

The Auto Big Star desiccator cabinet has an aluminium frame with panels made of acrylic glass, including two stainless steel shelves, hygrometer and mounted drying unit, usable with up to eight shelves.

Supplier: Bohlender

Clear, PMMA, reinforced aluminium frame with panels made of acrylic glass.

Supplier: Bohlender

Aluminium frame with 2-pane insulation (inside glass, outside acrylic glass), including four shelves made of PC, usable with up to max. 26 shelves. Integrated heating (850 W) with temperature sensor and air circulation. Electrical power connection 230 V/50 Hz is required.

Supplier: Bohlender

Transparent PPMA cabinet with reinforced aluminium frame, unit has a door with a foam rubber gasket and magnetic strip. Designed for storing or drying humidity sensitive products using silica gel. The controlled environment inside the desiccator is ideal for storing reference materials, retained samples, metallographic specimens, tobacco and DNA-samples.

Supplier: Bohlender

Desiccator cabinets, transparent acrylic, aluminium frame with panels made of acrylic glass, which are suitable for long-term storage.

Supplier: Bohlender

Toploader version, hinged lid opening with circular silicone gasket and four latches, vacuum gauge, two needle valves with hose connectors integrated in the hinged lid.