You searched for: Systémy pro spojování a značení proteinů

Supplier: AAT BIOQUEST

Production scale optimised for labelling 1 mg antibody per reaction. Buccutite™ Rapid PerCP antibody labelling kits, designed for large-scale production, provide a streamlined approach for labelling antibodies with PerCP, APC, PE and iFluor® tandem dyes.

Supplier: AAT BIOQUEST

Cy5 Bis NTA-Ni Chelator can be applied either to an SDS-PAGE gel or Western blot membrane for fluorescence imaging or used in living cells in combination with the addition of a heavy metal ion such as Ni²⁺.

Supplier: AAT BIOQUEST

mFluor™ Violet 540 labelled WGA is well-excited by the violet laser, emitting a bright green fluorescence at 535 nm.

Supplier: AAT BIOQUEST

mFluor™ Violet 500 labelled WGA is well-excited by the violet laser, emitting a bright green fluorescence at 501 nm.

Supplier: AAT BIOQUEST

mFluor™ Violet 450 labelled WGA is well-excited by the violet laser, emitting a bright blue fluorescence at 445 nm.

Supplier: AAT BIOQUEST

The iFluor® 700 conjugate of WGA possesses a bright, far-red fluorescence characteristic of the iFluor® 700 dye (Ex/Em = 690/713 nm).

Supplier: AAT BIOQUEST

XFD532, manufactured by AAT Bioquest, has an identical chemical structure to Alexa Fluor® 532, a trademark of ThermoFisher.

Supplier: AAT BIOQUEST

XFD555, manufactured by AAT Bioquest, has an identical chemical structure to Alexa Fluor® 555, a trademark of ThermoFisher.

Supplier: AAT BIOQUEST

ReadiLink™ Rapid antibody labelling kits, designed for production scale, provide a convenient and efficient method for labelling large volumes of antibodies with XFD dyes (equivalent to Alexa Fluor®).

Supplier: AAT BIOQUEST

ReadiLink™ Rapid antibody labelling kits, designed for production scale, provide a convenient and efficient method for labelling large volumes of antibodies with our superior iFluor® dyes.

Supplier: Thermo Fisher Scientific

The Thermo Scientific™ EZ-Link™ Plus Activated Peroxidase is an amine-reactive horseradish peroxidase (HRP) that provides higher conjugate yields (>95%) than glutaraldehyde chemistry.

Supplier: Thermo Fisher Scientific

Pierce™ azide-labeled sugars provide a highly specific approach for studying glycoproteins through in vivo metabolic labeling and chemoselective ligation.

Supplier: AAT BIOQUEST

The kit is optimised for efficient labelling and contains all the essential reagents required for efficient labelling of ssDNA or oligos.

Supplier: AAT BIOQUEST

The kit is optimised for efficient labelling and contains all the essential reagents required for efficient labelling of ssDNA or oligos.

Supplier: AAT BIOQUEST

Keyhole Limpet Hemocyanin (KLH) is one of the most commonly used carriers in the conjugation of peptides for antibody production.

Supplier: AAT BIOQUEST

Biotin is widely used for labeling biomolecules, in particular, antibodies.

Supplier: AAT BIOQUEST

Our Buccutite™crosslinking technology provides the most convenient and effective crosslinking method to link two biomolecules with a high conjugation yield.

Supplier: AAT BIOQUEST

APC-Cy5.5 is a popular colour used in flow cytometry.

Supplier: AAT BIOQUEST

VIC phosphoramidite is the most convenient building block to incorporate VIC tag into an oligonucleotide.

Supplier: AAT BIOQUEST

XFD555 is manufactured by AAT Bioquest, and it has the same chemical structure of Alexa Fluor® 555 (Alexa Fluor® is the trademark of ThermoFisher).

Supplier: AAT BIOQUEST

The kit uses a weakly fluorescent dye that carries a cell-retaining moiety.

Supplier: AAT BIOQUEST

Poly-HRP-antibody conjugates is considered to have the highest sensitivity in immunoassays where the sample is limited, or a target molecule is present at extremely low level.

Supplier: AAT BIOQUEST

ReadiLink™ xtra rapid antibody labelling kits require essentially only two simple mixing steps without a column purification needed.

Supplier: AAT BIOQUEST

AAT Bioquest's iFluor® dyes are optimised for labelling proteins, in particular, antibodies.

Supplier: Thermo Fisher Scientific

The Pierce™ Crosslink Immunoprecipitation (IP) Kit enables highly effective and efficient antigen immunoprecipitations by covalently crosslinking antibodies onto Protein A/G resin.

Supplier: Thermo Fisher Scientific

The DyLight™ Specialty Dyes are fluorescent dyes with varying spectral characteristics, degrees of sulfonation, charges and hydrophobicities. These dyes are offered in their amine-reactive forms and are mainly derivatized with N-hydroxysuccinimide (NHS) esters, the simplest and most commonly used reactive group for labeling proteins. The large selection of near infrared (NIR) and infrared (IR) dyes may be used for in vivo and near-IR fluorescence (NIRF) applications.

Supplier: Thermo Fisher Scientific

The DyLight™ NHS Ester Quenchers are amine-reactive non-fluorescent dyes that use fluorescent resonance energy transfer (FRET) to quench fluorescent signals resulting from ultraviolet, visible and infrared light-excited fluorescent dyes. These dyes can be efficiently paired with many DyLight™ dyes and other common fluorescent dyes including fluorescein, rhodamine, cyanine and Texas Red® dye.

Supplier: Thermo Fisher Scientific

The DyLight™ Antibody Labeling Kits were specifically developed for fast, efficient labeling of antibodies. Two convenient kit formats are available to accommodate varied labeling requirements. The DyLight™ Antibody Labeling Kits contain all necessary components to perform three separate labeling reactions using 1 mg of IgG or similar quantities of other proteins.

Supplier: Thermo Fisher Scientific

Cross linkers are used for the identification of near-neighbour protein relationships and ligand-receptor interactions. Homobifunctional, amine-reactive NHS esters or imidates, and heterobifunctional, amine-reactive, photoactivatable phenyl azides are the most commonly used crosslinkers for these applications.

Supplier: Thermo Fisher Scientific

Sulfo-SBED is a trifunctional crosslinking reagent containing a biotin, a sulfonated N-hydroxysuccinimide (Sulfo-NHS) active ester and a photoactivatable aryl azide