Hledali jste: Systémy polomasek

Supplier: 3M

The Versaflo™ Forehead Comfort Pads are designed for use with Versaflo™ S-Series head covers and hoods.

Supplier: 3M

The Versaflo™ Filter Cover TR-371+ is a replacement filter cover for use with Versaflo™ Powered Air Turbo TR-300+.

Supplier: 3M

The Versaflo™ Cleaning and Storage Kit TR-653 is designed to assist with safely cleaning and storing the Versaflo™ Powered Air Turbo TR-600 and TR-800 Series. It comes with one inlet plug and two inlet seals, one outlet plug and two outlet seals, and one battery connector cover.

Supplier: 3M

The Versaflo™ Backpack Adaptor TR-655 allows users to wear Versaflo™ Powered Air Turbo TR-600 or TR-800 unit on their back when used with Versaflo™ Backpack Harness BPK-01.

Supplier: 3M

The TR-819E starter kit for the Intrinsically Safe (IS) powered air purifying respirator comes ready to use and includes everything needed for immediate use.

Supplier: 3M

Versaflo™ poháněný vzduch Turbo TR-600 je zařízení na čištění vzduchu namontované na opasku. V kombinaci s jednou z přileb schválených 3M tvoří systém s posilovačem pro ochranu dýchacích cest proti částicím, nepříjemným pachům (pokud je to možné) a plynům a výparům.

Supplier: 3M

Versaflo™ S Series Peel-Off Visor Covers are transparent, peel-off visor covers designed for use with Versaflo™ Series S-133, S-333, S-433, and S-533 head covers and hoods. This self-adhesive cover protects the visor from contaminants and scratches.

Supplier: 3M

The Versaflo™ Over-Visor Frame M-961 is a carrier frame designed to fit Versaflo™ Over-Visor M-967 and Versaflo™ radiant heat covers for Versaflo™ M-Series Helmets.

Supplier: 3M

The Versaflo™ Breathing Tube Radiant Heat Cover BT-927 is a radiant heat-resistant, highly durable breathing tube cover for 3M™ Versaflo™ BT-Series Breathing Tubes.

Supplier: 3M

Přilby série Versaflo™ M-300 zajišťují ochranu dýchacích cest, očí a obličeje. Navíc zahrnují ochranu hlavy, nezbytnou pro oblasti, kde je povinností používat přilby (např. na stavbách).

Supplier: 3M

Přilby Versaflo™ řada M-400 s krytem chrání dýchací cesty, hlavu, oči, obličej před řadou rizik.

Supplier: 3M

The Versaflo™ coated visor M-927 is a clear, polycarbonate replacement visor designed for use with 3M™ Versaflo™ M-Series Headtops.

Supplier: 3M

The Versaflo™ Peel-Off Visor Cover for Premium Hoods is a transparent peel-off visor cover designed for use with Versaflo™ Series S-600, S-700, and S-800 premium head covers and hoods.

Supplier: 3M

The TR-970 Air Flow Indicator is used to confirm that the manufacturer's minimum design flow rate of the Versaflo™ TR-300 Series Powered Air Turbo is exceeded.

Supplier: 3M

The Adflo™ Powered air purifying respirator system with 3M™ Speedglas™ G5-01 series Welding helmet provides all of the benefits of the G5-01 series welding helmet with a convenient Adflo™ Powered air purifying respirator system.

Supplier: 3M

Kryt na lehkou dýchací trubici, Versaflo™, Pro: M-Series, Versaflo™, 3M™

Supplier: JSP

Dust and half masks commonly fail to do the job they are intended to do because of poor fitting and care by the user. Qualitative Fit Testing can be used not only as a test method to ensure wearers are properly protected, but also as a very effective way of training them in the correct way of fitting a mask.

Supplier: JSP

Jetstream® is a belt-mounted rechargeable respirator with a large capacity disposable dust filter. Jetstream® delivers 180 L/min. of air through the filter via a highly flexible hose to the desired headtop.

Supplier: 3M

Lehký, kompaktní a vyvážený obličejový štít s pohodlným obličejovým těsněním pro prach, stříkání a chemické zpracování.

Supplier: 3M

For effective protection against a range of particulates and gases encountered in the welding process, use 3M™ Adflo™ powered air respirator. The Adflo™ respirator connects directly with any Speedglas™ series respiratory welding helmet and can protect users against both particles and gases depending on the filter used.

Supplier: 3M

Versaflo™ Air Flow Indicator TR-971 is designed to confirm the manufacturer's design minimum air flow rate of Versaflo™ Powered Air Turbo is being exceeded.

Supplier: 3M

The Versaflo™ Spark Arrestor TR-662 is a spark arrestor for Versaflo™ Powered Air Turbo TR-600 Series filters. It prevents damage from sparks and other hot, airborne particles.

Supplier: 3M

Regulator Assembly S-212 is a replacement part for use with Versaflo™ Supplied Air System S-200+.

Supplier: 3M

The Versaflo™ Filter Cover TR-6300FC is a filter cover which helps protect 3M™ Versaflo™ TR-6310E filter from physical damage.

Supplier: 3M

The Versaflo™ Airflow Adjustment Cover S-955 is a spare airflow adjustment cover designed to replace worn or damaged parts in Versaflo™ S-Series Headtops.

Supplier: 3M

The Versaflo™ Headtop Cover M-972 is a flame-resistant polyester headtop cover designed to protect the M-Series headtop from sparks and hot particles.

Supplier: JSP

The Jetstream® Dust Industrial Kit consists of a belt-mounted rechargeable respirator with a large capacity disposable filter supplying clean air through a highly flexible reinforced hose to a grinding visor headtop.

Supplier: JSP

The PowerCap® Active™ is a lightweight positive pressure respirator with eye and face protection, as well as EN812 bumpcap protection. Designed to protect the user from dust and most airborne particulate pollutants to EN12941 TH1P.

Supplier: JSP

A fully integrated TH3 powered air respirator offering four of the highest levels of protection in one intuitive head-mounted unit. The system provides complete above the neck 4-in-1 protection; respiratory, head, eye, and face.

Supplier: 3M

Versaflo™ Visor Pivot Kit M-960 is a replacement part designed for use with 3M™ Versaflo™ M-Series Headtops.