You searched for: Elektrody

Supplier: Thermo Orion

The high performance ammonia ion selective electrode (ISE) allows fast, simple, economical, and accurate measurements of dissolved ammonia in aqueous solutions.

Supplier: WTW

Tyto digitální hloubkové sondy se zabudovanou kompenzací barometrického tlaku a teploty mohou měřit rozpuštěný kyslík, pH nebo ORP a vodivost současně s hloubkou. Mohou být použity s jednou, dvěma nebo třemi IDS elektrodami. Uvedená měření lze provádět s jedním z těchto zařízení - Multi 3430 nebo Multi 3630 IDS.

Supplier: Hach

A variety of pH electrodes for different applications. Ideal for use with sense ION+ pH meters or any other meter with BNC connection.

Supplier: YSI ENVIRONMENTAL

Electrode, Dissolved Oxygen, 1 m cable

Supplier: WTW

Self-stirring oxygen probe for simultaneous stirring and measurement.

Supplier: SI Analytics

Electrode, Dissolved Oxygen, Ox 1113T, −5...+45 °C, Ø×D: 12×120 mm, 1 m fixed cable with 8-pole plug

Supplier: WTW

Four-electrode plastic flow-through measuring cells with low-polarisation graphite electrodes for applications in closed circuits.

Supplier: KNICK

Electrode, pH, SE 104 N, pH: 2...13, −5...+80 °C, Plast, Diafragma: Hole junction, Elektrolyt: Polymer, Ø×D: 12×99 mm, DIN, Určeno pro: Semi-solid substances

Supplier: Hach

IntelliCAL™ ISENH4181 is a digital combination ammonium ion selective electrode (ISE) with a non refillable double junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.

Supplier: WTW

pH Combination electrode for heavily polluted waste water and electroplating.

Supplier: Mettler - Toledo

Electrode, Dissolved Oxygen, LE621, galvanic, with NTC30 KΩ, 0 - 200%, 0 - 20 mg/l, 0...+50 °C, Ø×D: 12×120 mm, BNC, 1 m cable

Supplier: Mettler - Toledo

Ideal for critical samples such as suspensions or samples of unknown composition (e.g. wastewater).

Supplier: Hach

These digital combination electrodes feature a built-in temperature sensor and are either refillable or non refillable. They can be used with all Hach HQd™ meters.

Supplier: Mettler - Toledo

Plug & Play combined silver ring electrode for argentometric titrations.

Supplier: HAMILTON BONADUZ

These electrodes are especially well suited for Knick® Portamess® equipment. The electrode head creates a hermetic seal with the Portamess® storage tube.

Supplier: Hach

Range of conductivity cells for a wide variety of applications.

Supplier: Hach

sensION+ 9650 is a half-cell sodium ion selective electrode (ISE) with glass body and glass membrane selective to sodium ions in solution. It is recommended for use with the sensION+ 5044 reference electrode.

Supplier: Hach

These combination electrodes feature a low maintenance 3-in-1 design for the most challenging applications. Equipped with an integrated Pt1000 temperature sensor they provide stable results with low maintenance requirements.

Supplier: Hach

Radiometer Analytical reference electrodes are available with a variety of reference systems and liquid junctions.

Supplier: WTW

Optical dissolved oxygen probes for field and laboratory applications. For use with IDS meters.

Supplier: WTW

The conductivity sensor LTC1/24 combines enhanced 2-electrode technology with rugged design in a 12 mm plastic body.

Supplier: SI Analytics

These electrodes are low maintenance sensors for heavy duty process applications in the chemical industry. They are ideally suitable for measuring media with extreme ionic strength - whether boiler feed water or brine - also in strongly oxidizing acid and alkali containing media.

Supplier: KNICK

Electrode, Dissolved Oxygen, SE 715/1-MS, digital, with temperature sensor, 0 - 20 mg/l, −5...+45 °C, Ø×D: 12×120 mm, Memosens

Supplier: HAMILTON BONADUZ

The Single Pore concept stands for precise, reliable, and fast readings with a proven, patented system that ensure optimal contact between the electrolyte and the sample.

Supplier: SI Analytics

When digital IDS sensors are connected to the measuring device, they automatically identify themselves with their serial numbers and type designation and transmit their calibration data to the device.

Supplier: WTW

IDS ORP electrodes are used to measure oxidation or reduction potentials in aqueous solutions - with integrated temperature sensor.

Supplier: HAMILTON BONADUZ

These robust combination pH electrodes are suitable for general laboratory applications, especially for measurements in emulsions and suspensions.

Supplier: Mettler - Toledo

The DM143-SC is a durable, double-pin platinum electrode requiring zero maintenance. Primarily used for redox titrations of food constituents such as Vitamine C or free and total SO2 in wine.

Supplier: EUTECH

Laboratory electrodes for measuring conductivity and temperature.

Supplier: HAMILTON BONADUZ

Polyplast electrodes have a shatterproof plastic shaft. They are ideal for portable measurements or as entry level sensors for basic laboratory applications.