Supplier: 3M

Tyto filtry pro masky jsou lehké, pohodlné a poskytují spolehlivou ochrana před částicemi. Při používání masek řady 3M™ 6000 je vyžadován adaptér 3M™ 502.

Supplier: 3M

These filters provide protection against dusts, mists and other particulate hazards when used with the 3M™ Versaflo Powered Air Respirator, TR-300 Series, and a 3M™ approved headtop.

Supplier: 3M

For effective protection against a range of particulates, gases and vapours or combination hazards, use 3M™ filters DT-Series. Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode as well as 3M™ powered air respirator system PF-600E+ series.

Supplier: Portwest

Disposable FFP3-mask consists of a PP substrate to which a laminated microporous polyethlene film is applied (PP/PE). The outer layer of fabric prevents the passage of liquid molecules inwards yet permits the vapour molecules that build up inside to pass through.

Supplier: 3M

3M™ Secure Click™ D3000 Series Particulate Filters feature a new dual flow design for easier breathing.

Supplier: 3M

3M™ Secure Click™ D7000 series particulate filters are designed for use with Secure Click™ 800 series respirators, Secure Click™ D8000 series filters and D701 filter retainer.

Supplier: 3M

Filter for respiratory mask, Předfiltr 5935, Třída: P3, Pro: 3M™ 6000, 7000 and 7500 Series

Supplier: 3M

Used to hold 3M Secure Click™ particulate filters D7N11 or D7P71 in place on Secure Click™ D8000 series cartridges.

Supplier: Portwest

Eagle FFP3 folding white mask with seven dynamic parts provides excellent facial movement with maximum comfort. Valved and with inner foam to increase the comfort of the wearer.

Supplier: 3M

The Versaflo™ Forehead Seal M-154 is a replacement forehead seal designed for use with 3M™ Versaflo™ M-100 and M-200 Series Headtops.

Supplier: RPB SAFETY

RPB C40 Climate device assembly and belt. For use with RPB's range of SAR respiratory head top, including Z-Link, T-Link, and Nova 3.

Supplier: RPB SAFETY

The RPB radex 6 outlet breathing air filter is designed to filter compressed breathing air of contaminants such as particulates down to 0,15 µm, odors, tastes, and moisture, in accordance with EN 12021 requirements.

Supplier: RPB SAFETY

The RPB T-Link respirator is a lightweight, multi-purpose TH3 respirator designed specifically for a range of industries, including healthcare, pharmaceutical, and industrial painting and coating. The advanced cradle provides unmatched comfort for the wearer, and keeps the lens and hood mounted solidly.

Supplier: RPB SAFETY

The RPB PX5 is a battery powered air purifying respirator fan unit which draws in contaminated air from the wearer’s immediate vicinity, passing it through internal filters, and supplying the filtered air to an approved RPB loose fitting respirator head top.

Supplier: RPB SAFETY

The RPB Z-link respirator with FR chin seal, is the world's most comfortable (fully padded) and versatile industry respirator. Providing the highest respiratory protection available (TH3), the Z-Link system also provides hard hat protection, eye and face protection and hearing protection.

Supplier: RPB SAFETY

The RPB PX5 is a battery powered air purifying respirator fan unit which draws in contaminated air from the wearer's immediate vicinity, passing it through internal filters, and supplying the filtered air to an approved RPB loose fitting respirator head top.

Supplier: RPB SAFETY

The RPB T-Link respirator is a lightweight, multi-purpose TH3 respirator designed specifically for a range of industries, including healthcare, pharmaceutical, and industrial painting and coating. The advanced cradle provides unmatched comfort for the wearer, and keeps the lens and hood mounted solidly.

Supplier: RPB SAFETY

RPB replacement flow control device assembly and belt. For use with RPB's range of SAR respiratory head top, including Z-Link and T-Link.

Supplier: RPB SAFETY

The RPB GX4 gas monitor continually monitors the quality of supplied breathing air. As soon as the air is no longer of EN breathing air standard, the unit will alarm to warn the respirator wearer that air entering the respirator is no longer safe to breath.

Supplier: RPB SAFETY

The RPB Z4 w/ PX5 PAPR starter kit provides everything needed to perform industrial welding and grinding tasks with the utmost in safety but also now with unmatched comfort and further reduced cost in use.

Supplier: RPB SAFETY

The RPB PX5 is a battery powered air purifying respirator fan unit which draws in contaminated air from the wearer's immediate vicinity, passing it through internal filters, and supplying the filtered air to an approved RPB loose fitting respirator head top.

Supplier: RPB SAFETY

The RPB radex 2 outlet breathing air filter is designed to filter compressed breathing air of contaminants such as particulates down to 0,15 µm, odors, tastes, and moisture, in accordance with EN 12021 requirements.

Supplier: Dräger

Reusable, robust X-plore® 4700 half masks combines a soft mask body, specially shaped nose seal and a sturdy plastic frame and offers excellent comfort and outstanding leak tightness for demanding applications. Thanks to the wide range of filters available for protection against gases, vapours and particles, it is ideally suited for use in a variety of industries.

Supplier: RPB SAFETY

The RPB T200 is a lightweight multi-purpose respirator designed specifically for the healthcare and life science industries, relieving workers of breathing difficulties and fatigue experienced with N95 use. Available with either a head harness or bump cap for head protection and multiple hood options, the T200 has the ability to adapt to different environments that need face protection and respiratory protection.

Supplier: RPB SAFETY

The RPB Z-Link respirator with FR shoulder cape is the world's most comfortable (fully padded) and versatile Industry respirator. Providing the highest respiratory protection available (TH3) the Z-Link system also provides hard hat protection, eye and face protection and hearing protection.

Supplier: RPB SAFETY

The RPB Z-link respirator with FR face seal, is the world's most comfortable (fully padded) and versatile industry respirator. Providing the highest respiratory protection available (TH3), the Z-Link system also provides hard hat protection, eye and face protection and hearing protection.

Supplier: Portwest

Vertical flat folded mask with exhalation valve for lighter breathing resistance. Ideal for all day use.

Supplier: Moldex

Classic FFP masks protect against dust, mist and fumes.

Supplier: Moldex

Moulded particulate filtering masks without valve or with different valve variations.

Supplier: UVEX

All masks of the uvex silv-Air e family combine our unique technologies of optimum wearer comfort with extremely low breathing resistance. The products are therefore suitable for heavy work and for being worn for long periods of time. The increased size of the filter surface even enables the high-performance models to be worn for several days.