You searched for: Fitinky a konektory

Supplier: Thermo Fisher Scientific

HDPE, translucent.

Supplier: IDEX RHEODYNE

RheFlex® tube fittings provide inert, non-metal connections, and can be used with all Rheodyne injectors, valves and sample loops.

Supplier: KARTELL

PP, translucent.

Supplier: KARTELL

PP, white.

Supplier: VACUUBRAND

Reducing cross pieces with small flanges KF made of aluminium or stainless steel.

Supplier: Thermo Fisher Scientific

For use with GC capillary columns and fused silica capillary columns.

Supplier: KARTELL

PP, translucent.

Supplier: Welch by Gardner Denver

Blank flanges KF made of nickel-plated aluminium or stainless steel.

Supplier: Thermo Fisher Scientific

Metal-to-metal seal eliminates contamination and gives lower air/water background noise. No need to retighten ferrules, as they expand and contract with the fitting over GC operating temperatures.

Supplier: COWIE

4-way connectors, made of PTFE, bayonet type for tubings.

Supplier: Bohlender

Screw cap made from PPS, inner section made from PTFE.

Supplier: VACUUBRAND

T-pieces with small flanges KF made of aluminium or stainless steel.

Supplier: VACUUBRAND

These elbow pieces with small flanges are made of aluminium or stainless steel.

Supplier: Welch by Gardner Denver

Adapters for vacuum pump hoses.

Supplier: Thermo Fisher Scientific

PP, beige.

Supplier: VACUUBRAND

These small flanges with weld stub short are made of stainless steel.

Supplier: Welch by Gardner Denver

Adapters, stainless steel, type KF, DN 25, Nerezová ocel, Šířka: 60 mm

Supplier: TOSOH Bioscience

Connection pipe set, J type

Supplier: KARTELL

These quick disconnector is useful for joining hoses of glass, rubber or plastic. Connectors fit tightly together. Replace expensive adapters.

Supplier: Thermo Fisher Scientific

For use with TRACE and FOCUS injectors and detectors (not GC/MS interface), Grafit, Ø otvoru: 0,1 – 0,25 mm

Supplier: Thermo Fisher Scientific

Most Nalgene® closures and those of other manufacturers can be retrofitted with these connectors for liquid transfer without a ventilation and venting device. To do this, simply drill two fitting holes in the closure, feed in the insert and tube connectors and attach tubes with 6 or 13 mm internal diameter. Nalgene® closures 53B (53 mm) can only be fitted with the 6 mm tube connectors, the 83B (83 mm) closures can be equipped with both 6 and 13 mm connectors.

Supplier: TOSOH Bioscience

These fittings and frits are made of 316-grade stainless steel.

Supplier: COWIE

Compression fittings are manufactured from pure PTFE and include a PEEK olive to give a secure grip.

Supplier: Welch by Gardner Denver

Flanges with tubulation, type KF, DN 25, Borosilikátové sklo, Délka: 80 mm

Supplier: DWK Life Sciences

KECK™ adapter for glass thread KA with screw threaded cap.

Supplier: VACUUBRAND

These small flanges are made of aluminium.

Supplier: VACUUBRAND

These flanges are available with pipe socket.

Supplier: COWIE

L-shaped right angle connectors, made of PTFE, for tubings.

Supplier: DWK Life Sciences

PBT, red with integrated silicone (VMQ) PTFE seal.

Supplier: Thermo Fisher Scientific

PP, white.