Supplier: Trajan Scientific and Medical

Constructed from borosilicate glass, PTFE plunger tips and Kel-F® or PTFE Luer cones where applicable.

Supplier: Trajan Scientific and Medical

The comprehensive range of L-MARK® Gold and L-MARK syringes for LC systems are designed and tested to meet critical instrument parameters.

Supplier: Trajan Scientific and Medical

These syringes are made from borosilicate glass. They are used as replacement for C and CX syringes.

Supplier: Trajan Scientific and Medical

These syringes are ideal for calibration of medical equipment such as respirators and spirometers, and for stack and air sampling.

Supplier: Trajan Scientific and Medical

Syringe, chromatography, HPLC, Gas-tight, with PTFE-tipped plunger, 1/4-28 UNF front thread, 250C-THERMOSPEC, Objem: 250 µl, Určeno pro: AS100/300 and AS1000/3000/3500 LC autosamplers, Bal.: 1

Supplier: HAMILTON BONADUZ

Suitable for applications such as GC, TLC and micro pipetting. Manufactured according to the principle of dead volume by positive pressure. A tungsten piston is introduced into the syringe as far as the tip of the needle. Needle and piston are calibrated against each other and must be changed at the same time in the event of replacement.

Supplier: HAMILTON BONADUZ

NR = Rheodyne needle
RNR = Replacement Rheodyne needle

Supplier: HAMILTON BONADUZ

The 1800 series is the reinforced plunger version of the 1700 series syringe. Attached to the flange of the syringe is a removable blue syringe holder that prevents heat transfer, dispense inaccuracies and plunger blow outs. It also provides support to small volume plungers that are prone to bending during injection.

Supplier: HAMILTON BONADUZ

The 600 series syringes are a half stroke version of the original 700 series syringes. This series of syringes is ideal for dispensing volumes from 0,25 μl up to 5 μl. The 600 series is often used in applications that require one handed operation because of the short stroke length and the reinforced plunger.

Supplier: HAMILTON BONADUZ

The 900 series syringe is the economical version of the 800 series syringe. This series of syringes is ideal for dispensing volumes from 0,5 μl up to 10 μl. The syringe holder is permanently attached to the syringe barrel. This reduces the initial cost of the syringe but eliminates the possibility of replacement components.

Supplier: HAMILTON BONADUZ

These syringes are used for GC autosamplers.

Supplier: HAMILTON BONADUZ

Syringe, chromatography, Microliter™, HPLC/GC, 1001 LTNCH, Objem: 1 µl, Rozchod: 22, Délka: 51 mm, Bal.: 1

Supplier: HAMILTON BONADUZ

The needle points of these thin layer chromatography syringes are covered with a PTFE coating which reduces the surface tension between the needle and the liquid making it ideal for reproducible sample spotting.

Supplier: HAMILTON BONADUZ

These gas tight syringe are designed for HPLC autosamplers.

Supplier: HAMILTON BONADUZ

This line of syringes developed for Spark Holland HPLC autosamplers offer everything required of an instrument syringe: chemical inertness, long life, reduced friction, precision and accuracy.

Supplier: HAMILTON BONADUZ

The syringe guide comes with a syringe installed from the factory. This eliminates the assembly step which can lead to damage of the smaller volume syringes. This is especially critical for 7000 series syringes which have extremely small plunger wires.

Supplier: HAMILTON BONADUZ

Gastight syringes for use with gases or liquids. Designed with or without ChemSeal (C) termination.

Supplier: HAMILTON BONADUZ

These syringes are used for Valco™ VISF-1 injection valves.

Supplier: HAMILTON BONADUZ

Super syringes with PTFE Luer lock (TLL) connector or tracheal adapter.

Supplier: HAMILTON BONADUZ

Multi-channel gel loading syringes are designed for multiplex DNA sequencing methodologies. They can rapidly transfer 1, 8, or 12 samples to sequencing gels, 96-well plates, or nylon membranes.

Supplier: HAMILTON BONADUZ

These gas tight syringes are designed for HPLC autosamplers.

Supplier: HAMILTON BONADUZ

Microliter™ and gas/liquid tight syringes with reinforced plunger, ranging from 10 to 250 µl.

Supplier: HAMILTON BONADUZ

Syringe, chromatography, HPLC, Gas tight syringes, model 1725, RN without needle, Model 1725, Objem: 250 µl, Určeno pro: Agilent 1090A, Bal.: 1

Supplier: HAMILTON BONADUZ

Microsyringe pipettes with a special ³/₄" electrotapered needle for easy attachment of PTFE tips. The sample only wets the disposable PTFE tips, eliminating sample cross-contamination.

Supplier: HAMILTON BONADUZ

These syringes are the Gastight® version of the original 700 series syringes and are ideal for dispensing volumes from 1 µl up to 500 µl.

Supplier: HAMILTON BONADUZ

The Digital Syringe™ is a calibrated device composed of a serialised syringe and a serialised digital electronic holder.

Supplier: HAMILTON BONADUZ

Syringes are designed and tested to meet critical autosampler performance needs.

Supplier: HAMILTON BONADUZ

Gastight® syringes for the PSD/2 syringe pump are available with a standard PTFE-tipped plunger and a long life ultra-high molecular weight polyethylene (UHMWPE) plunger tip. The stroke length of a PSD/2 syringe is 60 mm.

Supplier: HAMILTON BONADUZ

Developed specifically for the neurosciences, these syringes minimise injection site damage by increasing needle rigidity and delivering a micro volume of liquid to an exact location.

Supplier: HAMILTON BONADUZ

CTC PAL® autosamplers are able to sample from many different vial and well types and have ultimate platform flexibility. The syringe is the most important part of every injection that the HPLC PAL® system performs. These autosampler syringes are specially designed for use in these HPLC PAL® systems: PAL® HTC-xt, PAL® HTS-xt, PAL® HTX-xt sold under the following brands: AB Sciex, Agilent, Alpha M.O.S., Antek, Bruker, Dionex, GE, Gerstel, GL Sciences, Lauda, LEAP Technologies, MicroCal, MPS, Perichrom, PerkinElmer, Shimadzu, Sotax, Thermo Scientific, Waters and Zoex.