Hledali jste: Homogenizátory stolní

Supplier: VWR Collection

Tyto kompaktní homogenizátory jsou vhodné pro všechny standardní dispergační úkoly a intenzivní míchání. Jednotky jsou robustní a jejich stabilita zabraňuje pulsačním oscilacím a vibracím, je také jednoduchá a bezpečná výměna agregátů pro různé úkoly.

Supplier: VWR Collection

The VWR® 4-place Mini Bead Mill homogeniser is compact and powerful.

Supplier: VWR Collection

Homogeniser, Holder for 4×50 ml conical tubes (set of 2), stainless steel

Supplier: VWR Collection

Kulový mlýn pro rozmělňování vzorků s malým objemem. Zařízení lze rovněž použít pro třepání/míchání mikrozkumavek a mikrodestiček. Zařízení má široký rozsah použití v různých odvětvích vědy od geologie po biotechnologii.

Supplier: VWR Collection

The VWR® Bead Mill homogeniser is a part of the newest generation of Bead Mill homogenisers. This economical system is specifically designed for grinding, lysing and homogenisation of up to 16 samples. Using sample tubes pre-filled with a variety of lysing beads, the VWR Bead Mill vigorously and uniformly shakes the tubes providing an efficient, consistent high yield and quality homogenisation usually in less than 40 seconds.

Supplier: VWR Collection

VWR® Bead Mill MAX je prémiový model řady homogenizérů VWR Bead Mill. VWR Bead Mill MAX slouží k mletí, lýze a homogenizaci nejnáročnějších vzorků s opakovatelnými výsledky. Jedinečný pohyb držáku zkumavek zajišťuje vnitřní pohyb kuliček, omezuje víření a vytváří největší nárazovou sílu ze všech kuličkových mlýnů na trhu.

Supplier: KINEMATICA

Stand model, volume range 0,1 ml to 30 litres. The powerful PT 6100D was designed to deliver exactly reproducible homognising conditions for volumes up to 30 litres with the option to select and vary speed and time of operation, whilst monitoring the temperature. The unit can be controlled via the membrane keypad or from a PC using KIN software via an RS232 interface.

Supplier: KINEMATICA

Stand model, volume range 0,05 to 2500 ml for dispersing, homogenising, extractions, cell disruption, mixing, emulsifying and suspending. This model replaces the PT 1600 E and the PT 2100 incorporating the best aspects of both models.

Supplier: KINEMATICA

Stand model, digital, volume range 0,1 ml to 10 litres. Powerful unit for a wide range of dispersing and homogenising applications in the laboratory using the rotor/stator principle. Remote operation can be achieved with PC control using the supplied software and selection of the AUTO–mode.

Supplier: KINEMATICA

Stand model, volume range 0,1 to 10000 ml. Benchtop homogeniser with powerful motor and space-saving slimline design, which is easy to handle. Ideal for any dispersing and homogenising task. Interchangeable drive extensions mean different types of stand can be used.

Supplier: IKA

Model stojanový, rozsah objemu 1 až 2000 ml. Homogenizátor T 25 je ideální pro aplikace, jako je homogenizace vzorků odpadních vod, pro použití v laboratorních reaktorech, dispergační práce pod vakuem/tlakem a příprava vzorků v lékařské diagnostice.

Supplier: IKA

The LABOR-PILOT is a compact and multi-purpose inline laboratory dispersing machine. It is designed for solid-liquid mixing, homogenising, emulsifying, suspending and wet milling. The LABOR-PILOT 2000/4 is suitable for wide range of applications, particularly in the chemical, cosmetic, pharmaceutical, plastics, colours and food industries. It is uniquely designed with advanced technology and is available with six interchangeable modules.

Supplier: MP Biomedicals

Metal bead lysing matrix contains 3,175 mm diameter stainless steel.

Supplier: MP Biomedicals

FastPrep®-24 is used to homogenise biological samples. It lyses thoroughly and quickly any tissues and cells and thus allows easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: IKA

The T 25 easy clean control is a high-performance dispersing instrument with electronic speed control from 3000 to 25000 rpm for working volumes of 1 to 2000 ml (H2O). The S 25 EC-T-C-18G-ST tool allows temperature measurement and operation time detection through RFID. Device overheating is prevented by continuous temperature monitoring and the setting of temperature limits. The detection of operating time serves to guarantee regular maintenance.

Supplier: IKA

Universal disposable disperser system with disposable sample tubes that can be hermetically sealed. Provides protection and security from infectious sample materials, toxic substances or substances with strong odours.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 1 mm silica spheres. Lysing Matrix C tubes have red caps and are found in the FastRNA™ Pro Red Kit and FastProtein Red Matrix. Lysing Matrix C is used primarily for lysis of yeast and fungi and can also be used for moulds, spores and filamentous algae.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains garnet matrix and one ¼ inch ceramic sphere. Extra ¼" ceramic spheres are packaged separately. Lysing Matrix A tubes have orange caps and are found in the FastDNA™ and FastDNA™ SPIN Kits. Lysing Matrix A is used for all sample types except soil for the subsequent isolation of genomic DNA, RNA, functional proteins and other metabolites and small molecules. This grinding matrix is chemically inert and will not bind nucleic acids.

Supplier: MP Biomedicals

FastPrep-96™ is a versatile high speed homogeniser offering the ultimate in high throughput sample preparation. It is used to homogenise biological samples. FastPrep®-96 lyses thoroughly and quickly any tissues and cells so allowing easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 0,8 mm zirconium silicate beads.

Supplier: MP Biomedicals

Each impact-resistant tube contains 1,6 mm aluminum oxide particles and 1,6 mm silicon carbide particles.

Supplier: IKA

The T 25 easy clean digital is a high-performance dispersing instrument with electronic speed control from 3000 - 25000 rpm for working volumes of 1 - 2000 ml (H₂O).

Supplier: IKA

Powerful disperser for volumes ranging from 1 to 2000 ml (H2O) with digital speed display. The wide speed range of 600 to 25000 rpm facilitates work with high circumferential speeds. An extensive selection of dispersing shafts makes multiple applications possible. The application range includes homogenisation and dispersion tasks for use under vacuum in the IKA laboratory reactors.

Supplier: IKA

The UTTD control life science solution package was specially put together to meet the critical challenges of homogenising tissue, cartilage and bone samples: homogeneous comminution of the samples and protection against cross-contamination.

Supplier: IKA

Many standardised test procedures in the pharmaceutical industry, such as the pharmacopoeia tests described in official compendia (United States Pharmacopeia (USP 905), European Pharmacopoeia (PhEur 2.9.40), etc.), require the crushing and dissolution of tablets as a first step before further analysis. The challenges in sample preparation include the avoidance of cross-contamination between sample batches, time-consuming cleaning and the often small sample quantities.

Supplier: MP Biomedicals

Lysing Matrix E is effective in lysing mixed samples, such as microbe infected tissue, and can be used in RNA extraction from tumours and other difficult tissues.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm glass beads and 2 mm yellow zirconium oxide beads.

Supplier: IKA

Stojanový model, rozsah objemu 2 až 50 litrů.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains one 6,35 mm, 0,25 cal stainless-steel grinding ball.

Supplier: OHAUS

The HT (High Throughput) lysing bead mill laboratory homogeniser provides efficient solutions for grinding, lysing, pulverising, mixing and homogenising in sample preparation applications.