12767 Results for: "Liners+gc+septa+gc+ferrules"

Supplier: AGILENT HEWLETT PACKARD

These inlet liners prevent adsorption and ensure accurate sample transfer onto the GC column through a robust deactivated surface. These liners are recommended for trace level analysis of active analytes. Liners with inert wool retain non-volatiles, prolonging column life and lowering frequency of MS source maintenance.

Supplier: Thermo Fisher Scientific

Optimise the performance of Agilent™ GC systems with these specifically designed injection port liners for Agilent instruments.

Supplier: HAMILTON BONADUZ

Long Life GC autosampler septa are designed for use with GC autosamplers.

Supplier: HAMILTON BONADUZ

These preconditioned PTFE/silicone rubber septa are 3,175 mm thick.

Supplier: HICHROM

These ferrules hold pressure holding for flat bottom fittings.

Supplier: Avantor

Avantor® ACE®, Replacement ferrules, 聚醚醚酮

Supplier: HAMILTON BONADUZ

These preconditioned silicone rubber septa are 3,81 mm thick.

Supplier: HICHROM

Natural and M6 single ferrule nuts.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: HICHROM

Avantor® Hichrom, Flangeless ferrule ¹/₈", 黄色

Supplier: HICHROM

Precision-machined stainless steel nuts and ferrules.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: HAMILTON BONADUZ

Low bleed high temperature septa are designed for the lowest bleed possible at temperatures of up to 400 °C. They can be used in combination with Mass Spectrometers or in applications where septa bleed interferes with trace analysis. These septa are typically used for manual injection applications.

Supplier: METROHM

These septa are made from silicone rubber.

Supplier: METROHM

Aluminium caps with silicone septum suitable for 6 ml sample vials.

Supplier: VWR Collection

Bucket liners create an impermeable barrier between the disinfectant and receptacle.

Supplier: AGILENT HEWLETT PACKARD

General purpose graphite ferrules, short, ferrule ID 0,8 mm, column ID 0,45, 0,53 mm, 石墨

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: HAMILTON BONADUZ

The septum adapter connects to any PTFE Luer lock (TLL) or Luer tip (LT) syringe. The adapter seals the syringe barrel but the sample remains accessible by piercing the replaceable septum.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: AGILENT HEWLETT PACKARD

1/16" stainless steel fitting (includes nut, front and back ferrules), 不锈钢

Supplier: BOHLENDER

Threaded adaptor to connect a septum cap with a capillary connector of b.safe caps.

Supplier: Corning

Individual septa for 0,5 ml ABI Prism® 310 sequencer tubes.

Supplier: MASTERFLEX PREMIUM

Unique sealless design permits gentle pumping action that provides little churning or foaming.

Supplier: VWR Collection

VWR®, Chromatography vial closure, Crimp caps with septa, open top, 硬度: 53° shore A, 隔膜: PTFE liner, 厚度: 0,25 mm

Supplier: VWR Collection

VWR®, Septa, Transparent blue silicone /white PTFE, 硬度: 45° shore A, 厚度: 1,3 mm

Supplier: DWK LIFE SCIENCES

WHEATON®, Septa, Locking flange septa, autoclavable, Chlorobutyl/50, 直径: 33 mm

Supplier: HICHROM

Avantor® Hichrom, End fitting with ferrule, FEM, 1/4 - 1/16"

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.