57 Results for: "CHEMGLASS"

Supplier: CHEMGLASS

Used to connect dissimilar standard taper joint sizes. Reduction adapter from large cone at the base to small socket on the top.

Supplier: CHEMGLASS

Flasks are manufactured to conform to Federal Specifications NNN-F-289 for Type 1, Class 'A' unserialized flasks and ASTM E-288.

Supplier: CHEMGLASS

Unbreakable dewar flask made entirely of stainless steel. Has flexible laboratory applications including cooling of small samples and as an insulating flask. Used for storage and transport of liquid nitrogen, dry ice CO₂ and other coolants.

Supplier: CHEMGLASS

Borosilicate glass 3.3.

Supplier: CHEMGLASS

Used to connect dissimilar standard taper joint sizes. Expansion adapter from small cone to large socket.

Supplier: CHEMGLASS

Perforated porcelain desiccator plate with a large hole in the center for easy placement or removal from a glass dessicator and widely used in chemistry laboratories.

Supplier: CHEMGLASS

These adapters permit the connection of standard laboratory dram sample vials directly to the vapor tube or a bump trap of a rotary evaporator.

Supplier: CHEMGLASS

Neoprene filter adapters are designed to fit between the filtering funnel and flask. For use with buchner funnels, grooch crucibles, filter tubes, etc. Eliminates the boring of rubber stoppers and the difficulties of inserting and removing glass stems in stoppers.

Supplier: CHEMGLASS

Manufactured from Type 1 borosilicate glass with round ends.

Supplier: CHEMGLASS

Stirring shafts with a ring at the lower end to enable the blade to be attached by means of a PTFE nut and bolt . The polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing.

Supplier: CHEMGLASS

Viton O-ring is stocked in brown 75 durometer. Ideal for acids, aliphatic hydrocarbons, oxidising agents and all petroleum products.

Supplier: CHEMGLASS

These heavy wall pressure vessels have an internal thread for use with a 15 mm PTFE bushing as a pressure seal. This unique design allows hand tightening and loosing for easy access into the vessel.

Supplier: CHEMGLASS

These grease-free PTFE stirrer bearings consist of a threaded glass adapter with the listed inner joint, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing.

Supplier: CHEMGLASS

These low-density polyethylene dispensing bottles are break-resistant and include DOT, CAS numbers, NFPA codes and symbols, protective equipment symbols, and target organ information on their exterior.

Supplier: CHEMGLASS

This silicone sponge closure is manufactured with a sealed in silicone sponge filter. Flange fits snugly over the necks of vessels permitting the exchange of gases, while reducing evaporation and preventing the passing of aerosols.

Supplier: CHEMGLASS

CAP CRIMPER MANUAL 20MM 1 * 1 items

Supplier: CHEMGLASS

洗瓶Wash Bottle, Ethyl Acetate，Polyethylen 1 * 1 件

Supplier: CHEMGLASS

VIAL, 1 DRAM, 15X45MM, VIAL, 1 DRA

Supplier: CHEMGLASS

Stopper Only, Blue Butyl Rubber, 20mm, 1*100 items 1 * 100 items

Supplier: CHEMGLASS

9-PLACE PIE WEDGE FOR 1 DRAM (4ML) VIAL, 1 * 1 ST

Supplier: CHEMGLASS

4-PLACE PIE WEDGE FOR 30ML SCINTILLATION 1 * 1 items

Supplier: CHEMGLASS

储存管，40mL，透明，28 x 95mm，24-400白色实心盖，TFE隔垫 1 * 100 件

Supplier: CHEMGLASS

储存管，20mL，透明，28 x 57mm，24-400白色实心盖，TFE隔垫 1 * 100 件

Supplier: CHEMGLASS

反应容器外套1000ML 1 * 1 件

Supplier: CHEMGLASS

搅拌器轴 1 * 1 套

Supplier: CHEMGLASS

储存管，4mL，透明，15x45mm，13-425Green 实盖，TFE 垫片 1 * 100 件

Supplier: CHEMGLASS

温度控制器TEMPERATURE CONTROLLER 1 * 1 件

Supplier: CHEMGLASS

[EN]REACTION BLOCK 2 DRAM VIAL ANODIZED 1 * 1 Pce

Supplier: CHEMGLASS

REACTION BLOCK 40ML ORANGE 1 * 1 件

Supplier: CHEMGLASS

一次性勺子 抗静电 1 * 300 件