You searched for: Cleanroom Wipes

Supplier: VWR Collection

These cleanroom wipes are made of polyester and cellulose.

Supplier: VWR Collection

These wipes are made from 100% continuous filament, double-ply, ultrasonically-sealed polyester to provide better absorbency. The wipe's size is perfectly suitable for usage on a mop frame for floor, ceiling and wall cleaning.

Supplier: VWR BRAND PRIVATE LABEL USA

Durable wipers resist fibre release and abrasion under rigorous use, even when wiping rough surfaces.

Supplier: VWR Collection

These are 100% continuous-filament, double-knit polyester fabric wipes.

Supplier: VWR Collection

Excellent for cleaning rough, abrasive, or irregular surfaces, yet soft enough for delicate surfaces. Appropriate for pharmaceutical and biotechnology industries.

Supplier: VWR Collection

These wipes are made from double-woven polyester fabric, with close-cut edges, and are washed in an ISO Class 4 cleanroom to minimise contamination by particles and extractables.

Supplier: VWR Collection

Designed for cleaning laminar flow benches, cleanroom surfaces, quartzware and general process equipment. Appropriate for electronics, pharmaceutical, biotechnology, chemical and petroleum, environmental and education industries. Non textured.

Supplier: VWR Collection

These wipes are made from 100% continuous filament, double-ply, ultrasonically-sealed polyester to provide better absorbency.

Supplier: VWR BRAND PRIVATE LABEL USA

These highly absorbent wipes are constructed from a naturally reticulated, hydrophilic, polyurethane foam.

Supplier: VWR Collection

Ideal for cleaning rough or uneven surfaces, yet still soft enough for use on sensitive surfaces. Use these 100% double-knit, polyester wipes where minimum particle and fibre contamination is essential.

Supplier: VWR BRAND PRIVATE LABEL USA

These non woven wipes, made from 45% polyester and 55% cellulose, are designed for cleaning laminar flow benches, cleanroom surfaces and general process equipment. The wipe is pre-saturated with semiconductor grade solvent (70% IPA/30% DIW) for safe storage, mixing and dispensing.

Supplier: VWR Collection

Wipers exhibit a higher absorbency rate, with lower particle generation and ion content.

Supplier: VWR BRAND PRIVATE LABEL USA

This wipe is made from a hydroentangled blend (45% polyester and 55% cellulose) that combines the strength and cleanliness of synthetic polyester with the high absorbency of cellulose.

Supplier: VWR Collection

High absorbency, low particle generation.

Supplier: VELTEK ASSOCIATES

STERI-PEROX® wipes leave no residue and are used for both aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel surfaces, Lexan, polycarbonate, glass, and any critical surfaces that require cleaning.

Supplier: VELTEK ASSOCIATES

HYPO-CHLOR® saturated wipes are designed for intricate or sensitive locations where a spray down would create residues. The 100% continuous polyester fiber is clean and absorbent.

Supplier: VELTEK ASSOCIATES

WipeDown is designed as a dry cleaning wipe for use during wipe downs of filling and packaging machinery, stainless steel surfaces, lexan, polycarbonate, glass and any other critical surface that requires cleaning.

Supplier: VELTEK ASSOCIATES

Individually-packaged sterile wipes are a polyester blend that is inherently low in particulate and shedding features and saturated with DAS Stainless Steel Cleaner and Lubricant. DAS-Wipe 100 is designed to replace silicone on turntables, process lines and as a general lubricant to assure bottles do not stick during movement towards the critical fill site.

Supplier: VELTEK ASSOCIATES

WipeDown HC dry wipers are ultra-clean laundered and suitable for use in cleanroom environments.

Supplier: BERKSHIRE

These non woven hydroentangled cellulose polyester blend wipes are ideal for general cleaning and spillages.

Supplier: CONTEC

Ideal for wiping exterior surfaces of products and cleaning interior surfaces of process tools or other equipment. Made from 100% textured polyester no-run knit.

Supplier: ITW-CONTAMINATION TEXWIPE

These 100% polyester wipes are made by a hydroentanglement process using jets of water to mechanically entangle the fibres, eliminating the need for chemical binders.

Supplier: CONTEC

The lightweight Polywipe-C Heatseal wipe consists of a fabric knitted from filament polyester and features a textured surface for effective cleaning. The wipe is laser-cut, which seals the fibers at the edges.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges.

Supplier: CONTEC

Polynit wipes are made of 100% knitted textured polyester with knife cut edges for a very soft wipe.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges.

Supplier: CONTEC

These wipes are manufactured from high quality 100% knitted polyester fabric with sealed edges. The polyester fabric offers the widest range of solvent compatibility. Ideal for use in product contact areas.

Supplier: ITW-CONTAMINATION TEXWIPE

TechniCloth® wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe.

Supplier: ITW-CONTAMINATION TEXWIPE

These mop covers are constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern.

Supplier: CONTEC

These hydrophilic polyurethane foam wipes are engineered for use in cleanroom and other critical applications. They combine high absorbency with extremely low levels of extractable residue and particles.