You searched for: Vacuum Diaphragm Pumps

Supplier: VWR Collection

Dual-head, dry running diaphragm pump with an integrated self-drying system. There is a wide range of applications for this pump in laboratories, especially whenever clean vacuum is required and moist gases must be pumped down. Examples include operation of vacuum drying chambers (for drying or heat-treating substances and components) or steam sterilisers for sterilising instruments, vessels, filters and textiles. This pump can be used in a wide range of applications due to the pump's high resistance to aggressive media. The pump includes a PTFE coated diaphragm with patented tension optimisation, which allows the pump to be smaller, and prolongs the service life of the diaphragm. The innovative self-drying system allows condensed liquid to be blown out of the pump heads at high speed during evacuation. The vacuum in the vacuum chamber remains constant. The drying cycle can be adjusted to the requirements of the individual process using three variables. After drying, the pump reaches a better vacuum and is able to evacuate significantly faster compared with pumps without a drying system.

Supplier: VWR Collection

Dual-head, dry running diaphragm pump for a wide range of laboratory applications. It pumps, compresses and evacuates without affecting media, i.e. media remains uncontaminated. The pump includes a diaphragm with patented tension optimisation, which allows the pump to be smaller prolonging the service life of the diaphragm.

Supplier: VWR Collection

Single head, dry running diaphragm pump for a wide range of laboratory applications. It pumps, compresses and evacuates without affecting media, i.e., media remains uncontaminated. Includes diaphragm with patented tension optimisation, which allows the pump size to be smaller extending the service life of the diaphragm.

Supplier: VWR Collection

VCP 80 and VCP 130 can be used as vacuum and pressure pumps, and set a standard for efficient vacuum use. Use these pumps as an affordable vacuuming application where corrosion resistance is not required. These pumps can be used for vacuum filtration of aqueous solutions, or aqueous fumes including buffers, but are not recommended for pumping acidic, basic or organic fumes. These VWR® Collection vacuum/pressure pumps are designed for continuous unattended operation, and have two dial gauges with manual regulators that enable you to adjust and easily monitor the required vacuum or pressure level.

Supplier: VWR Collection

The VP 220 is ideal for rotary evaporators providing the powerful vacuum needed for demanding evaporations without the use of oil pumps. VP 220 has built-in Advanced Vapour Management (AVM) which means precise control capability for the distillation of organic solvents and applications handling aggressive vapours and gases. The VP 220 is especially effective for rotary evaporation of low boiling point solvents such as acetone and ethanol and is able to rapidly strip DMF at 35 °C. The pump parts are all made of corrosion resistant materials such as PTFE and Kalrez to handle aggressive vapours, and together with vacuum adjustment, the evaporation process will be optimised. Use the vacuum adjustment to increase the vacuum until bubbles form in the evaporation flask - then lower it slightly. Reduce the vacuum for fast reaction to bumping or foaming.

Supplier: LABCONCO

Single- or dual-head chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.

Supplier: BURKLE

It is a single-head membrane vacuum pump which is widely used in research laboratories and industrial applications.

Supplier: BUCHI

These V-300 PTFE diaphragm vacuum pumps impresses with its very silent and economical operation. These pumps have been operated at a flow rate of 1,8 m³/h and an ultimate vacuum of 5 mbar.

Supplier: GARDNER DENVER

MPC models use PTFE and other flourinated plastics for the wetted parts to allow agressive acids and vapours to be pumped. All two-stage and three-stage MPC pumps come standard wtih gas a ballast valve.

Supplier: GARDNER DENVER

These non-chemical-resistant diaphragm pumps characterized by a compact design, long lifespan and oil-free evacuation are designed for aqueous and standard duty applications. The diaphragm series are well known for smooth operation. They are available in one or multistage configuration with controlled (ecoflex) or uncontrolled pumping speed. Ecoflex diaphragm pumps are equipped with a state-of-the-art vacuum control which allows the pumping speed to be varied.

Supplier: KNF

Single- or dual-headed, dry running diaphragm pumps for a wide variety of applications in laboratories. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated. The pump includes a PTFE-coated diaphragm with patented tension optimisation, which allows the pump to be smaller and prolongs the service life of the diaphragm, it is ideal for aggressive/corrosive gases and vapors.

Supplier: GARDNER DENVER

CDK turbomolecular pumping systems are completely oil-free. It incorporate an oil-free SST turbomolecular pump using dry-running, solid-lubricated ceramic bearings. The backing pump is an oil-free diaphragm vacuum pump.

Supplier: GARDNER DENVER

These are certified pumps for the evacuation of combustible atmospheres inside or outside of highly combustible environments. They are used for operating in potentially explosive atmospheres.

Supplier: GARDNER DENVER

The MPC chemical duty diaphragm pumps use PTFE and other fluorinated plastics for the wetted parts to allow aggressive solvent and acid vapours to be pumped. If the pump should handle harsh chemical vapours, then the superior chemical resistant X2 version with higher grade seals and thicker coatings are the best choice. These are well known for quiet operation and running smoothness.

Supplier: CYTIVA PALL

This combined vacuum pump and compressed air supply is guaranteed oil and dust-free and helps to keep the entire laboratory spotlessly clean.

Supplier: GARDNER DENVER

Pumps are constructed with PTFE heads, perfluoroelastomer valves and a PTFE coated molded diaphragm. Includes intake/exhaust hose barbs. DRYFAST® models include tunable vacuum control.

Supplier: GARDNER DENVER

All standard WOB-L piston pumps are recommended for pumping vapors of aqueous solutions including buffers but not for acidic, basic or organic vapours or gases.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: THERMO LABSYSTEMS LIFE SCIENCE

This single integrated unit combines an oil free vacuum source and refrigerated vapor trap.

Supplier: GARDNER DENVER

These dry vacuum pumps are widely used for general vacuum work, air/gas sampling, fast evacuation of large chamber volumes, backing pump for various turbo pumps, drying chambers, vacuum chambers, degassing and isolation vacuum.

Supplier: VACUUBRAND

These mechanical diaphragm pumps function without oil. They are easy to operate, use no water and generate neither wastewater nor used oil. These pumps are used for evacuating or pumping gases between containers in chemistry or physics laboratories and are extremely versatile.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.