You searched for: Evaporators
Evaporators remove solvents from compounds to purify and concentrate materials. Using motion, steam, or vacuum-applied heat techniques, sample conditions are safer for testing and storage. Creating more homogenous samples, procedures that would normally be difficult to complete are easier and yield highly reproducible results. Able to fit any common size benchtop space, the controls can easily make adjustments for the correct component isolation. Cutting down on unnecessary costs, the evaporators allow smaller quantities to be handled.
VWR® LED Digital Rotary Evaporator
Supplier: VWR Collection
This is a basic chemical laboratory instrument suitable for evaporation, distillation and separation of chemicals. It can be used as a multifunctional system in combination with a vacuum pump, vacuum controller and refrigerated circulator to provide excellent distillation solutions in many laboratory applications.
Expand 1 Items
VWR® Digital Rotary Evaporator, LCD
Supplier: VWR Collection
This is an essential instrument for use in chemical laboratories for efficient and gentle removal of solvents from samples by evaporation. It offers an excellent distilling solution in a wide range of applications.
Expand 1 Items
Evaporation system, RapidVap® N₂
Supplier: LABCONCO
An efficient, automatic evaporator system which can be used with a broad range of aggressive chemicals. In RapidVap N₂ systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow-down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.
Expand 2 Items
Vacuum evaporation systems, RapidVap®
Supplier: LABCONCO
These systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. The systems may be used with a broad range of aggressive chemicals. Heat is supplied by a dry block heating system that, unlike water baths, adds no potential source of contamination and requires no maintenance.
Expand 4 Items
Dry evaporation systems, N₂/48, RapidVap®
Supplier: LABCONCO
This system uses nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once.
Expand 3 Items
Dry evaporators, RapidVap® Vertex™ Dry
Supplier: LABCONCO
This evaporator speeds evaporation of up to 50 samples at the same time using dry heat and nitrogen blow down. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, and adds no potential source of contamination.
Expand 2 Items
Centrifugal Concentrators, Bench Top, CentriVap®
Supplier: LABCONCO
CentriVap® vacuum concentrators are available in a range of configurations. The CentriVap® DNA model is supplied with a built-in 34 litres/min diaphragm pump, two 177 ml glass traps and a DNA rotor (60×1,5/2,0 and 72×0,5 ml). Model with glass lid is recommended for evaporation of solvents that are not compatible with acrylic (acetone, acetonitrile, ethanol, DMSO, etc.). The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, etc.).
Expand 3 Items
Rotors and accessories for CentriVap® concentrators
Supplier: LABCONCO
Special rotor, for 20×70 mm vials, For: Labconco CentriVap®
Expand 2 Items
Modular concentrators, digital series, SpeedVac™
Supplier: THERMO LABSYSTEMS LIFE SCIENCE
These SpeedVac™ concentrators are ideal for conducting basic molecular biology applications and organic chemistry applications.
Expand 2 Items
Vacuum concentrator, Savant™ SPD131DDA SpeedVac™
Supplier: THERMO LABSYSTEMS LIFE SCIENCE
Approved for combinatorial chemistry, this concentrator incorporates a new slim, modular design with digital programming for enhanced usability. Ideal for evaporating strong acids, bases and aggressive organic solvents