Blocks

Supplier: VWR Collection

Block heater block, VWR®, Single block, Well size: Ø 10,7 mm, For: 10 mm round bottom tubes, No. of Holes: 24, Depth: 48,4 mm

Supplier: VWR Collection

Constructed from a solid anodised aluminium block.

Supplier: VWR Collection

Solid blocks: For use as a low temperature hotplate or for custom drilling.

Supplier: VWR Collection

Block heater block, VWR®, Interchangeable thermal microplate block with lid, Well size: 128,5×85,9 mm, For: 1×96-well microplate, No. of Holes: 1, Depth: 25,4 mm

Supplier: VWR Collection

Block heater block, VWR®, Aluminium block, For: 1,5 ml tubes, No. of Holes: 40

Supplier: VWR BRAND PRIVATE LABEL USA

Block heater block, VWR®, Mini block without thermometer well, Well size: Ø 11,5 mm, For: 2,0 ml tubes, No. of Holes: 15, Depth: 30,5 mm

Supplier: LABCONCO

All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Supplier: GRANT INSTRUMENTS

Grant blocks have a depth of 63 mm, ensuring precise temperature control for test tube applications.

Supplier: JENCONS SCIENTIFIC

Interchangeable blocks are made of high grade, non porous, anodised aluminium. Except the blocks used for plates and slides, all other blocks include positions for a block lifter and calibration thermometer.

Supplier: HAEP LABOR

Block heater block, Block, BP 16, For: 24×16,5 mm Ø round bottom tubes, 46 mm depth, No. of Holes: 24

Supplier: IKA JANKE KUNKEL

Block heater block, Single block, combination: 6/5/3×6/12/13/25 mm Ø holes, For: Test tubes, 6 ml/12 - 13 ml/25 ml, Depth: 48,4/48,4/48,4 mm

Supplier: EPPENDORF

Exchangeable in just seconds. Individually sensor-controlled SmartBlocks are your solution for maintaining accurate, uniform temperatures. A wide variety of these flexible thermoblocks for all common laboratory vessels support a broad range of applications - for use with Eppendorf ThermoMixer® C and ThermoStat C.

Supplier: IKA JANKE KUNKEL

Reaction blocks allow syntheses to be carried out in round-bottomed flasks at temperatures up to 180 °C, avoiding the use of oil baths. The system ensures optimum heat transfer from the heating plate directly into the medium. Uniform mixing is also guaranteed since there is no interference to the magnetic field from the aluminium blocks. Reaction blocks range from 100 to 5000 ml in size, and inserts accommodating round bottom flasks from 10 to 3000 ml are available. Due to the wide range of interchangeable inserts, this system can be used for a range of different applications with the RCT, RET and RH magnetic hotplate stirrers.

Supplier: Thermo Fisher Scientific

Block heater block, Aluminium, ¼ aluminium block, For: 0,5 ml tubes, No. of Holes: 12