You searched for: Syringe Filters

Supplier: VWR Collection

Syringe filter, VWR®, Membrane material: PES, Pore size: 0,8 µm, Ø: 25 mm

Supplier: Avantor

These syringe filters are specifically designed for chromatography sample preparation applications and optimised to provide the most consistent results with less extractables.

Supplier: VWR BRAND PRIVATE LABEL USA

PP, nylon and PTFE membranes are ideal for sample preparation and small volume chemical filtration. Syringe filters with CA or PES membranes are ideal for sterile filtration of buffers, tissue culture media or additives and other biologicals. The PES membrane offers high flow rates. Non sterile syringe filters are excellent for HPLC applications. Each filter has a female Luer lock inlet and a male slip Luer outlet.

Supplier: VWR Collection

Typical applications are clarification, sterile filtration, sample preparation and sterile venting.

Supplier: VWR Collection

Available with either PP, PTFE or nylon membrane. Membranes are available in either 0,2 or 0,45 µm pore size, with the choice often made on analytical column packing size. If the column packing size is larger than 3 μm then use 0,45 μm, and if 3 μm or smaller then use 0,2 μm.

Supplier: MILLIPORE

Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of samples improves the quality and consistency of analytical results and decreases instrument downtime.

Supplier: MILLIPORE

HPLC certified filters for the filtration of organic and aqueous solutions in HPLC.

Supplier: MILLIPORE

Durapore® PVDF syringe filter.

Supplier: MILLIPORE

These syringe filters with PES membrane and PVC housing are suitable for filtration and venting purposes.

Supplier: LOCAL DEALS

PP housing syringe filter for samples up to 10 ml. It has a high recovery rate, high effective filtration area, and low residual liquid volume. Hydrophobic nature makes the syringe suitable for organic solvent samples.

Supplier: THERMO NATIONAL SCIENTIFIC

These syringe filters have a PP housing.

Supplier: MACHEREY-NAGEL

These syringe filters are used for filtration of suspended matter from liquid samples.

Supplier: CYTIVA WHATMAN

Cytiva's Whatman Roby syringe filters are designed specifically for automated filtration systems. The design of the polypropylene housing ensures smooth transport from the storage turntable to the filtration site.

Supplier: CYTIVA WHATMAN

Whatman ReZist range of syringe filters has been specifically designed to be resistant to organic solvents.

Supplier: AGILENT HEWLETT PACKARD

These syringe filters have a PP or MBS housing.

Supplier: CYTIVA PALL

ValuPrep syringe filters offer the confidence of Pall membranes in economic 1000 packs.

Supplier: CYTIVA WHATMAN

Whatman GD/X Syringe Filters are high-viscosity filters that incorporate a prefilter to enable filtration of viscous, dense or otherwise hard-to-filter material with high solids content as in environmental and food analysis samples.

Supplier: CORNING SCIENCE PRODUCTS

Syringe filters are available with a choice of membrane type: Polyethersulfone (PES) for low protein binding and faster flow rates; surfactant-free cellulose acetate (SFCA), with or without prefilter, for lowest protein binding; Polytetrafluoroethylene (PTFE) for chemical resistance; regenerated cellulose (RC) – the best choice for DMSO compatibility; and nylon (NY) which is hydrophilic, surfactant-free and lowest extractable.

Supplier: CYTIVA WHATMAN

Cytiva's Whatman Anotop Plus sterile syringe filter with glass microfiber prefilter is compatible with most organic and aqueous solutions for use in a wide variety of applications.

Supplier: MILLIPORE

Vented Millex®-GS filter units are syringe filters for sterilisation of low volume aqueous solutions where venting is desired.

Supplier: CYTIVA PALL

Acrodisc™ syringe filters with Supor™ membrane deliver high flow rates and low protein binding.

Supplier: CYTIVA WHATMAN

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.

Supplier: CYTIVA WHATMAN

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.

Supplier: CYTIVA WHATMAN

Whatman Anotop Plus non-sterile syringe filters from Cytiva have an integrated glass microfiber prefilter and inorganic membrane, enabling filtration of a wide variety of sample solvents and compounds.

Supplier: CYTIVA WHATMAN

These syringe filters, with pigment-free PP housing, are ideal for use with samples that require inorganic ion analysis, as levels of ion extractables are minimised.

Supplier: CYTIVA WHATMAN

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.

Supplier: CYTIVA WHATMAN

Cytiva's Whatman GD/X sterile syringe filter is designed to support filtration of viscous, hard-to-filter samples with high solids content.

Supplier: Thermo Fisher Scientific

These syringe filters are ideal for filtration, clarification or particle removal from buffers, reagents, DMSO, HPLC/GC solvents.

Supplier: Thermo Fisher Scientific

These syringe filters with PTFE membrane and PP housing are used for benchtop fermenters, in-line gas filtration for sterile air or CO₂ and to protect vacuum pumps from damage by aqueous solutions. They are also designed for filtration of aggressive chemicals and solvents such as those used in GC and HPLC.

Supplier: CYTIVA PALL

For solutions containing dimethylsulfoxide (DMSO). Sterilisation of media used for cell cryopreservation.