You searched for: Chromatography Columns

Supplier: CHIRAL TECHNOLOGIES

These columns have the same coated chiral selector as found in the normal phase stationary phases, however in comparison, they use a different bounded silica as the base material which stabilises the CSP.

Supplier: GE HEALTHCARE

Superose 6 Increase SEC columns are designed for high-resolution, small-scale preparative purification, and analysis of large globular proteins, protein complexes, and other macromolecules in the molecular weight range 5 to 5000 kD.

Supplier: Thermo Fisher Scientific

The Acclaim™ Trinity™ P2 is a high-performance, silica-based column specifically designed for separation of charge molecules, including pharmaceutical counter ions by HPLC.

Supplier: GE HEALTHCARE

Superdex prep grade (pg) is produced by covalent bonding of dextran to highly cross-linked agarose.The separation properties of these media are determined by the dextran component

Supplier: AGILENT HEWLETT PACKARD

These non-polar columns are used in wide range of applications.

Supplier: MACHEREY-NAGEL

Nonpolar GC phase.

Supplier: Thermo Fisher Scientific

These low bleed columns are specifically designed for the analysis of pesticides and it is mainly useful for applications requiring a higher temperature.

Supplier: AGILENT HEWLETT PACKARD

Poroshell 120 is made with a superficially porous particle that has a solid silica core and a porous outer layer. This particle provides high efficiency at lower pressures and is ideal for fast or high-resolution separations of many types of analytes.

Supplier: MACHEREY-NAGEL

NUCLEOSIL® C18 are octadecyl modified silica phases for HPLC.

Supplier: RESTEK

Raptor™ ARC 18 columns are ideal for high-throughput LC-MS/MS applications with minimal sample preparation.

Supplier: Thermo Fisher Scientific

Reversed phase columns provide the advantages of high resolution at high flow rates for fast protein separation and analysis.

Supplier: MACHEREY-NAGEL

NUCLEOSIL® NH2 and NH2-RP are aminopropyl modified silica phases for HPLC.

Supplier: AGILENT HEWLETT PACKARD

ZORBAX® 80 Å StableBond® columns are made using bulky, patented, unique silanes that sterically protect the siloxane bond. Acid labile endcapping reagents are not used.

Supplier: TOSOH BIOSCIENCE

Stainless steel columns with non-ionic carbamoyl [-C(NH₂)O] groups on a silica gel basis suitable for the separation of hydrophilic and polar compounds.

Supplier: GE HEALTHCARE

HiTrap IEX Selection Kit is used for screening of the optimal Cytiva ion exchange resin for specific application and development work.

Supplier: WATERS

Styragel® HR columns are high-resolution GPC columns packed with 5 µm particles and are ideal for characterising samples in the low to mid molecular range where high resolution is critical.

Supplier: PHENOMENEX

HyperClone™ are reversed phase HPLC columns developed for reducing the chance of column-to-column variation.

Supplier: BIO RAD

Column type: HPLC column, Empty polypropylene columns, Poly-Prep®, 90 mm high, 2 ml bed volume, with end caps and tip closures, Empty columns: Yes

Supplier: PHENOMENEX

Rezex™ HPLC ion-exclusion columns achieve reproducible, accurate separations based on multiple modes of interaction.

Supplier: PHENOMENEX

Synergi™ Hydro-RP columns have polar endcapped, ether-linked phenyl phase providing polar and aromatic reversed phase selectivity.

Supplier: WATERS

These columns complement the ACQUITY BEH C18 and C8 phases and provide a necessary and powerful tool for HPLC method development. The embedded carbamate group in the bonded phase ligand provides alternate selectivity, especially for phenolic compounds compared to straight chain alkyl columns.

Supplier: PHENOMENEX

Synergi™ Hydro-RP columns have polar embedded C18 phase that provides extreme hydrophobic and slight polar selectivity.

Supplier: WATERS

XBridge™ BEH C18 sorbent can be used over an entire range of mobile phase pH (1 to 12). The trifunctionally bonded C18 ligand provides you with a universal column for most HPLC separations and gives you the widest usable pH range, superior low pH stability, and ultra-low column bleed.

Supplier: WATERS

Nova-Pak® C18 columns are general purpose, silica based, reversed phase C18 columns that are based on 4 µm particle technology.

Supplier: PHENOMENEX

Luna® C18 is a reversed phase column that provides a measurable improvement over many HPLC columns for two important chromatographic properties - resolution and peak shape.

Supplier: PHENOMENEX

Kinetex C18 are core-shell silica supported 100 Å columns with TMS endcapping for general reversed phase separations.

Supplier: WATERS

Silica-based bonded phase with strong hydrophobicity used to adsorb analytes of even weak hydrophobicity from aqueous solutions.

Supplier: WATERS

SunFire™ columns provide symmetrical peak shapes for improved resolution. With new bonding and endcapping technologies, they offer great efficiency for acid, neutral, and basic compounds at low and intermediate pH ranges. They are compatible with mass spectrometry applications, providing sharp peaks, high sensitivity, large peak capacities and very low bleed.

Supplier: WATERS

Symmetry® C18 columns feature monofunctionally bonded C18 ligands on a high purity base-deactivated silica.

Supplier: PHENOMENEX

Luna® C18(2) is a reversed phase column that provides a measurable improvement over many HPLC columns for two important chromatographic properties - resolution and peak shape.