1596 Risultati per: "single-use assemblies"

Supplier: DESCO

Wescorp heel ground with one Megohm resistor are designed to satisfy Footwear requirements of IEC 61340-5-1.

Supplier: Ansell

This glass-free INTERCEPT liner provides increased cut protection and lasting comfort and protection for hard-working hands.

Supplier: Bel-Art Products, a Part of SP

This rack is useful for safe transport and incubation of 60 mm Petri dishes and helps to streamline benchtop sample processing. Rack base is epoxy coated steel, and all other parts are made of white polypropylene.

Supplier: Bohlender

To avoid spill over of canisters through the connection of a waste cap capacitive to a b.safe Display for electronic level control. With the use of b.safe waste tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: 3M Food Safety

This 3M™ Petrifilm™ Spreader is an easy-to-use tool designed to quickly and evenly distribute inoculum within the 3M™ Petrifilm™ Plate.

Supplier: HEATHROW

The RF1000 pipette controller is lightweight and easy to use. It is a manual pipette controller and is uniquely designed for one-handed operation.

Supplier: COWIE

Rod baffles featuring a stainless steel core fully encapsulated in PTFE.

Supplier: Ansell

The lightest weight cut resistant and oil repellent glove providing enhanced worker comfort and safety, with strategically reinforced 'high wear' regions for extended-use life.

Supplier: Saint Gobain Life Sciences

Sani-Tech® STHT®-R braid-reinforced, platinum-cured silicone hose is an ultra-flexible, high-purity hose that was developed for higher-pressure applications. It is manufactured with Sani-Tech® 65 custom-brand silicone resin. Sani-Tech STHT-R hose resists temperature extremes, ozone, radiation, moisture, compression sets, weathering, and chemical attack. It imparts no taste or odours to fluids transported.

Supplier: ProSci Inc.

Required for checkpoint mediated cell cycle arrest in response to DNA damage or the presence of unreplicated DNA. May also negatively regulate cell cycle progression during unperturbed cell cycles. Recognizes the substrate consensus sequence [R-X-X-S/T]. Binds to and phosphorylates CDC25A, CDC25B and CDC25C. Phosphorylation of CDC25A at 'Ser-178' and 'Thr-507' and phosphorylation of CDC25C at 'Ser-216' creates binding sites for 14-3-3 proteins which inhibit CDC25A and CDC25C. Phosphorylation of CDC25A at 'Ser-76', 'Ser-124', 'Ser-178', 'Ser-279' and 'Ser-293' promotes proteolysis of CDC25A. Inhibition of CDC25 activity leads to increased inhibitory tyrosine phosphorylation of CDK-cyclin complexes and blocks cell cycle progression. Binds to and phosphorylates RAD51 at 'Thr-309', which may enhance the association of RAD51 with chromatin and promote DNA repair by homologous recombination. Binds to and phosphorylates TLK1 at 'Ser-743', which prevents the TLK1-dependent phosphorylation of the chromatin assembly factor ASF1A. This may affect chromatin assembly during S phase or DNA repair. May also phosphorylate multiple sites within the C-terminus of TP53, which promotes activation of TP53 by acetylation and enhances suppression of cellular proliferation.

Supplier: BANDELIN-ELECTRONIC

The cavitation improving and material protecting features allow a maximum effect of the ultrasonic cleaning.

Supplier: Corning

PP sterile closed system centrifuge tubes arrive individually double bagged and pre-assembled. The caps have two ports: One port ends in a 0,2 µm filter, and the other port is chemically resistant, heat sealable flexible tubing, ending in a male Luer. Dip tubes, where available, reach all the way to the bottom of the flask for easy aseptic transfer during your liquid handling process.

Supplier: MACHEREY-NAGEL

These screw neck vials are characterized by a wide opening and a short thread.

Supplier: PURITECH

These glove liners made of 100% soft nylon fabric with PU coating on the palm are ideal for handling small components.

Supplier: PROTECTIVE IND

These cut and sewn nylon gloves are made of 40 Denier Tricot fabric in a two-piece pattern.

Supplier: Avantor Fluid Handling

Ultra-clean and reliable fittings for highly critical and corrosive chemicals.

Supplier: ELTEN

Lace-up safety shoes made from a microfibre/mesh material blend.

Supplier: ProSci Inc.

ITIH3, which is short for Inter-alpha-trypsin inhibitor heavy chain H3, is a 890 aa. protein. It is secreted expression, and belongs to the ITIH family. I-alpha-I plasma protease inhibitors are assembled from one or two heavy chains (H1, H2 or H3) and one light chain, bikunin. Inter-alpha-inhibitor (I-alpha-I) is composed of H1, H2 and bikunin, inter-alpha-like inhibitor (I-alpha-LI) of H2 and bikunin, and pre-alpha-inhibitor (P-alpha-I) of H3 and bikunin. ITTH3 may act as a carrier of hyaluronan in serum or as a binding protein between hyaluronan and other matrix protein, including those on cell surfaces in tissues to regulate the localisation, synthesis and degradation of hyaluronan which are essential to cells undergoing biological processes.

Supplier: ProSci Inc.

Ferritin is a large, iron-storage heteropolymeric protein,which is expressed in most kinds of cells and co-assemble in different proportion in a tissue-specific manner. Ferritin has oligomer of 24 subunits and two types of subunits including light chain(FTL) and heavy chain. Ferritin can remove Fe (Ⅱ) from solution in the presence of oxygen and is very important for iron homeostasis. Iron is absorbed in the ferrous form and deposited as ferric hydroxides after oxidation. Iron is first oxidised to the ferric state for storage as ferric oxyhdroxide whithin the protein shell of ferritin. Thus, ferritin removes excess iron from the cell sap where it could otherwise participate in peroxidation mechanisms. Ferritin also plays a role in delivery of iron to cells and mediates iron uptake in capsule cells of the developing kidney.

Supplier: HAMILTON BONADUZ

This multi-syringe dispenser consists of six identical 1700 RN series Gastight® syringes. An easy to use mechanism releases step by step movement of the plungers. Each movement dispenses 1/50th of the syringe volume.

Supplier: Slee

The CUT 6062 is a fully automated rotary microtome equipped with maintenance-free caged roller bearing guide ways and micrometre feed mechanism to provide the highest stability and precision.

Supplier: SEASTAR CHEMICALS

SEASTAR™ BASELINE® bottle-top dispenser, constructed from modified PTFE, combines the convenience of a traditional pump dispenser with the chemical compatibility and high purity.

Supplier: VWR Collection

Crimp Neck ND13 vials manufactured from 1st hydrolytic class borosilicate glass with flat bottom. They can be purchased with a variety of aluminium seal styles and septa materials.

Supplier: UVEX

These polyamide/elastane gloves with aqua-polymer foam coating on palm, fingertips and parts of the back of the hand offers outstanding protection against humidity. They fit like a second skin and are particularly light and flexible, without making the hands sweat.

Supplier: Ansell

It is a touchscreen-friendly polyurethane gloves that offer heightened comfort and dexterit.

Supplier: VARIAN

The Vac Elut™ 20 vacuum control valve, vacuum gauge, and quick release valve are mounted on the lid, away from the corrosive waste stream and within convenient reach. The solvent-resistant PP rack is available in a variety of sizes to accommodate collection tubes commonly used in sample preparation.

Supplier: EUTECH

This galvanic DO electrode with ATC has a response time of 40 sec to reach 93 % of the final reading. For use with the following Eutech meters: DO 600 / DO 300 / DO 110 / PD 650 / PCD 650.

Supplier: witeg Labortechnik

Borosilicate glass 3,3.

Supplier: JUSTRITE MANUFACTURING

High quality anti-fatigue matting for use in areas where there can be frequent oil spilling.

Supplier: Cytiva

The simple, modular design of miniVE vertical electrophoresis system consolidates all the small parts for electrophoresis and blotting into one convenient unit. Uniform gel temperature is maintained with the tank-style lower buffer chamber. A full tank stabilises the temperature so that lanes are straight and bands are flat. The blot module will accept two gel/membrane stacks simultaneously. The lower buffer chamber is designed to hold two blot modules, allowing four gels to be blotted at once.