537 Risultati per: "Sterile Gloves"

Supplier: Nitritex

[EN]GLOVE NITRILE N/STER AMB BLUE 240MM 1 * 100 pezzi

Supplier: Nitritex

[EN]GLOVE NITRILE N/STER AMB BLUE 240MM 1 * 100 pezzi

Supplier: Nitritex

[EN]GLOVE NITRILE N/STER AMB BLUE 240MM 1 * 100 pezzi

Supplier: Ansell

Made from 100% polychloroprene, these gloves offer splash resistance against a broad range of chemicals. With no natural rubber latex or accelerators used in manufacturing, the risk of Type I and IV skin allergies is reduced.

Supplier: NASCO FORT ATKINSON

Make environmental surface sampling faster and easier with Whirl-Pak polyurethane surface sampling bags with premoistened sponge. The durable high-density polyurethane sponge is ready to use and resists tearing and fraying.

Supplier: VWR Chemicals

Surface sampling sponges in two forms: Dry sponge sterile sampling bag with write-on strip, containing a dry, biocide-free cellulose sponge, or wet sponge sterile sampling bag, with a foil-sealed, pre-moistened cellulose sponge, and 10 ml of sterile neutralising buffer.

Supplier: CONTEC

Contec® Sterile NeutraKlean is a gentle and low-foaming detergent designed for the cleaning of life science cleanrooms. Ready to use, irradiated neutral detergent with purified water.

Supplier: NASCO FORT ATKINSON

Cellulose sponges for your environmental monitoring and surface sampling needs.

Supplier: Ansell

These disposable nitrile gloves provide chemical and liquid protection. The most advanced glove in type I and IV allergy prevention, the Microflex 93-823 has been clinically proven to decrease redness and itchiness associated with contact dermatitis. Engineered without the use of chemical additives (including accelerators) that are known skin irritants, the 93-823 is safe for those with sensitive skin or prone to allergic reactions.

Supplier: NASCO FORT ATKINSON

Blended, virgin polyethylene film provides exceptional clarity and superior strength HACCP, EPA, USDA, FDA approved for food contact.

Supplier: HONEYWELL SAFETY

These disposable nitrile gloves offer better mechanical resistance than latex gloves.

Supplier: 3M

Non-sterile version of Tegaderm™ Transparent film roll provides all the benefits of surgical tape while providing a waterproof, bacterial and viral barrier.

Supplier: Sartorius

The Sterisart® Universal pump, Gen 4 is a robust and reliable peristaltic sterility testing pump built from 316L mirror-finish stainless steel and used for sample and media transfer into the Sterisart® family of sterility testing canisters.

Supplier: PIERCAN

These durable arm guards are made of Hypalon® (CSM - chlorosulphonated polyethylene). They provide an excellent chemical resistance and a high resistance to ozone and UV. For use with glove boxes.

Supplier: CONTEC

Contec Sterile Denatured Ethanol is a blend of 70% v/v denatured ethanol with 30% water for injection or purified water. Contec’s ethanol is only denatured with IPA creating a very low residue product.

Supplier: MEDICAL WIRE EQUIPMENT

Non-inhibitory sponge material allows effective sampling of larger areas for environmental and hygiene monitoring. Available dry or pre-moistened with sterile diluent. Polywipes are supplied in peel pouches for immediate use, or in a 110 ml blue-capped container for transfer to the laboratory.

Supplier: CONTEC

Contec HydroPure is a blend of 6% stabilised hydrogen peroxide and water for injection (WFI) or purified water. Contec HydroPure is BPR authorised at EU level and is efficacious against bacteria, fungi, moulds and yeasts.

Supplier: CONTEC

Presaturated wipes can offer many benefits over bottled alcohol and dry wipes for cleanroom use. Contec’s sterile SATWIPES Theta with 70% denatured ethanol consist of a perforated roll of presaturated wipes which are dispensed through a convenient centre pull canister.

Supplier: Texwipe

These wipes constructed from a hydroentangled polyester/cellulose blend are pre-wetted with 70% isopropyl alcohol and 30% DIW (filtered through a 0,2 μm filter). Each package is gamma irradiated to 10⁻⁶ Sterility Assurance Level.

Supplier: KIMBERLY CLARK

These gloves provide protection in life science and pharmaceutical manufacturing environments. The anti-static safety gloves provide all the comfort and assurance that is needed in research laboratories. The synthetic nitrile polymer (Acrylonitrile Butadiene) is highly watertight with a low risk of pinholes and, once on, these gloves will both dissipate static and minimise any risk of latex or silicone hypersensitivity, helping to keep hands healthy and protected while supporting contamination-free research.

Supplier: HIMEDIA

Sterility test medium also used for cultivation of soyabean casein digest medium.

Supplier: Texwipe

VersaWipe® is made from 45% polyester / 55% cellulose non woven material with a cut edge. Ideal for spill control, cleaning, and solution application.

Supplier: Thermo Fisher Scientific

Manufactured from virgin polypropylene these microcentrifuge tubes ensure sample integrity and security during boiling, freezing, incubation and centrifugation.

Supplier: 3M MEDICAL

This transparent film dressing in frame style provides a waterproof, sterile barrier to external contaminants including liquids, bacteria and viruses. In vitro testing shows that the transparent film provides a viral barrier from viruses 27 nm in diameter or larger while the dressing remains intact without leakage.

Supplier: VELTEK ASSOCIATES

DEC-AHOL WFI® Formula is a 70% USP Isopropyl Alcohol (IPA) formulated with 30% Water for Injection (WFI). This USP IPA has been designed specifically for pharmaceutical, biotechnology, healthcare, and medical device cleaning rotations for use in both aseptic and non-aseptic environments. DEC-AHOL WFI Formula can be used for the decontamination of numerous surfaces within any cleanroom operation.

Supplier: VWR Collection

These VWR® pipette tips are made of clear, pre-tested PP resin and fit Rainin® LTS® pipettes.

Supplier: CONTEC

Contec® HydroPure a blend of 6% stabilised hydrogen peroxide and purified water and leaves little to no residue and is ideal for use on most surfaces. Contec® HydroPure is BPR authorised at EU level and is efficacious against bacteria, fungi, moulds and yeasts.

Supplier: GA

These labels are intended for identifying metal, plastic, and glass surfaces, including surgical instruments, glassware, trays, blister packs, and other items that will undergo sterilisation.

Supplier: VWR Collection

These tips are made with a special resin that reduces the potential for sample retention inside the tip. They help users reduce sample loss when performing protein research. These tips fit Rainin® LTS® pipettes.

Supplier: LABORATOIRES ESCULAPE

Emergency first aid kit that ensures compliance with standards for the transportation of dangerous goods.