439 Results for: "CONTEC"

Supplier: CONTEC

Contec Sterile Denatured Ethanol is a blend of 70% v/v denatured ethanol with 30% water for injection or purified water. Contec’s ethanol is only denatured with IPA creating a very low residue product.

Supplier: CONTEC

These heat seal wipes are made from filament polyester that is laser cut to bond the fibres at the edges of the wipes. This creates a very clean, non abrasive edge that allows full utilisation of the wipe surface. The wipes are saturated with 70% USP grade IPA, 30% DI water.

Supplier: CONTEC

Presaturated with 70% USP grade IPA and 30% DI water.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water

Supplier: CONTEC

Contec® Sterile NeutraKlean is a gentle and low-foaming detergent designed for the cleaning of life science cleanrooms. Ready to use, irradiated neutral detergent with purified water.

Supplier: CONTEC

These PROSAT® Sterile™ Theta™ wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with knife cut edges.

Supplier: CONTEC

QuickTask™ mopping system. The QuickTask™ product line consists of a variety of knitted polyester, polyester/cellulose, microfibre/foam and microfibre flat mop heads that are easily installed onto a hinged mop head frame and QuickConnect interchangeable handle. QuickTask™ mop head frames are available in stainless steel or durable, autoclavable polypropylene.

Supplier: CONTEC

The Polywipe-C Heatseal wipe is made from filament polyester and pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Thermally bonded non woven PP and cellulose quilted wipes, two layers of PP trap the cellulose core, which allow this material to be very absorbent, with a high level of cleanliness.

Supplier: CONTEC

These lightweight, polyester disposable mops are excellent for applying disinfectants and for wet cleaning of vertical surfaces, ceilings, and walls in controlled environments. Ideal for reaching awkward corners and ceilings with a complete range of motion.

Supplier: CONTEC

Amplitude™ Prozorb® wipes are a hydroentangled blend of cellulose and polyester, produced through a special process that creates apertures in the fabric while enhancing the thickness and providing excellent cleanliness.

Supplier: CONTEC

Meltblown polypropylene wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Due strati di tessuto di poliestere in maglia sono laminati insieme per ottenere un panno di lunga durata con una capacità di assorbimento più che doppia rispetto ai singoli strati.

Supplier: CONTEC

Realizzato in fibra sintetica al 100% utilizzando il processo di interlacciatura ad acqua, questo panno (progettato per la pulizia di prodotti ottici delicati quali lenti e specchi) è eccezionalmente pulito e duraturo. Possiede un'ottima resistenza chimica, quindi è ideale per l'uso con solventi. La sua struttura a fibre aperte offre un ottimo potere assorbente.

Supplier: CONTEC

Consisting of 70% v/v Isopropanol blended with highly purified water, this ready to use formulation eliminates mixing and filtration. Used for disinfecting gloved hands and also as a surface disinfectant, particularly when used in conjunction with Contec® wipes.

Supplier: CONTEC

Non woven cellulose/polyester hydroentangled wipes made from 55% cellulose and 45% polyester, highly sorbent with excellent durability and good cleanliness.

Supplier: CONTEC

These meltblown PP wipes are saturated with a 70% isopropyl alcohol/30% deionised water blend and are sterilised by gamma irradiation.

Supplier: CONTEC

Mop heads are constructed from a two-ply quilted 100% polyester on the outer face with a synthetic fibrefill core.

Supplier: CONTEC

Contec® ProChlor is a ready to use sporicidal biocide based on stabilised hypochlorous acid with purified water and is specifically designed for cleanroom environments.

Supplier: CONTEC

Questo panno è realizzato in poliestere e cellulosa blu di qualità speciale; offre proprietà superiori di pulizia e un ottimo potere assorbente.

Supplier: CONTEC

Tessuto misto di poliestere/cellulosa non tessuto e interlacciato ad acqua. Ideali per la pulizia dei prodotti prima dell'introduzione in clean room.

Supplier: CONTEC

These non woven PP wipes are saturated with 70% denatured ethyl alcohol and 30% deionised water.

Supplier: CONTEC

Contec® Sterile IPA is a blend of 70% v/v Isopropanol with 30% water for injection or purified water, this ready to use formulation eliminates mixing, filtration, processing and QC expense of in-house production. Used for wiping gloved hands and also as surface cleaner for removal of contaminants particularly when used in conjunction with Contec® sterile wipes.

Supplier: CONTEC

Panni in tessuto di poliestere, preimbevuti, realizzati in materiale Polynit Heatseal. I panni sono preimbevuti di IPA al 70% e acqua deionizzata al 30%. Pertanto sono ideali per applicazioni di camera bianca, per la preparazione delle superfici e per processi di produzione critici.

Supplier: CONTEC

Absorbent, non woven cellulose/polyester wipes, feature enhanced sorbency while being economical due to their light weight.

Supplier: CONTEC

These absorbent non abrasive wipes consist of long staple cellulosic fibres which are wet laid in a paper making process to form an extremely clean sheet.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges.

Supplier: CONTEC

Polynit wipes are made of 100% knitted textured polyester with knife cut edges for a very soft wipe.

Supplier: CONTEC

VertiKlean® MAX™ is designed for applying disinfectants to both horizontal and vertical surfaces and is ideal for general cleaning of ceilings, walls and floors. This lightweight mop features a single layer of hydrophilic polyurethane foam laminated to polyester microfibre fabric backed with a semi-rigid thermoformed plate, which easily snaps onto a VertiKlean® mop head frame.