1191 Results for: "Bohlender"

Supplier: Bohlender

Connector, screw thread coupling, made of PTFE. Two screw caps made of PPS or PBTP with GL thread and a PTFE/FPM gasket. The product is only exposed to PTFE.

Supplier: Bohlender

Straight tube fitting, made of PTFE, with one screw-in thread (either NPT or G thread).

Supplier: Bohlender

PTFE, white.

Supplier: Bohlender

Made of PTFE.

Supplier: Bohlender

Block made of PTFE with one inlet and four outlets with female thread UNF ¼" 28 G.

Supplier: Bohlender

Acrilico trasparente. Gli armadi sono dotati di un telaio in alluminio rinforzato, sportello con guarnizione in schiuma e profilo magnetico. Progettati per conservare o asciugare prodotti sensibili all'umidità mediante gel di silice. L'ambiente controllato all'interno dell'essiccatore è ideale per la conservazione di materiali di riferimento, campioni chiusi, campioni metallografici, tabacco e campioni di DNA.

Supplier: Bohlender

Used for temperature measurement in aggressive liquids and ideal for built-in measurement cables.

Supplier: Bohlender

Upper side of the screw caps is made of PTFE and lower side is made of silicone-elastomer for balancing unevennesses on sealing surfaces.

Supplier: Bohlender

These filtering rods are made of microporous PTFE.

Supplier: Bohlender

Vario 2-part coupling to connect elastic tubing with non-elastic tubing made of PTFE, glass, metal or other plastics.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the fan shaped stirring unit completely made of PTFE.

Supplier: Bohlender

Flexible corrugated tubing with 1× thread connection GL 14 to screw in the exhaust filter connection of a b.safe Waste Cap and 1× plug connection with ribs for connection to the exhaust system with a bore Ø 14 mm.

Supplier: Bohlender

Sensore di livello, Combined signal device

Supplier: Bohlender

All adaptors of this type are supplied with a male thread, a female thread and recessed grips.

Supplier: Bohlender

For assembly of components with ground joint cone NS 29/32 on bottles and vessels with GL 45 thread.

Supplier: Bohlender

Extension of the number of capillary and/or tubing connectors on a b.safe Waste Cap. With PFA Fittings for capillaries with Ext.Ø 1,6/2,2/3,2 mm (thread UNF ¹/₄"), 1 hose connector for tubing Int.Ø 5,5 to 8,0 mm (thread NPT ¹/₈").

Supplier: Bohlender

Space saving stainless steel stand for two S50 canisters.

Supplier: Bohlender

Straight fitting made of PTFE, capillary connection on both sides (UNF ¹/₄" thread), with 2 PFA fittings each for tubing Ext.Ø 1,6/2,2/3,2 mm.

Supplier: Bohlender

One connection for up to four HPLC systems that can be integrated directly in laboratory hoods or working tables. b.safe Waste Pipes lead liquid solvent waste directly into connected canisters.

Supplier: Bohlender

Made of aluminium profiles and polyamide connectors.

Supplier: Bohlender

Special design allows turning the two halfs of the coupling independently from each other, and to adjust connected components. This design also provides high stability. A sealing lip on the connecting tube with integrated FKM O-ring ensures good sealing on the GL thread.

Supplier: Bohlender

Made of static dissipative PE-EX.

Supplier: Bohlender

T-shaped connector made of static dissipative PE-EX.

Supplier: Bohlender

Made of PE, to reduce the bore diameter in table- or countertops from approx. 54 to 30 mm to ensure a safe installation of e.g. b.safe Desktop Mounts or b.safe Multiports in corresponding bores. Consisting of top part, lock washer and silicone gasket to avoid rotating and slipping during installation.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: Bohlender

Stirrer blades made of PTFE, with one sided groove and 10 mm bore diameter.

Supplier: Bohlender

Body made of PTFE with 2 connections and nuts made of glass-fibre reinforced PTFE for connecting tubing or tube.

Supplier: Bohlender

Thermoelectric flanging tools are used for making flanges at the ends of plastic tubing such as PTFE, PFA and FEP tubings.

Supplier: Bohlender

PTFE coated stirring bars. Provide excellent centering and smooth stirring.

Supplier: Bohlender

Culture bottles, made of borosilicate glass, suitable for both low and high speed (maximum 1000 rpm) stirrers for gentle mixing of cell cultures.