1191 Risultati per: "Bohlender"

Supplier: Bohlender

These filtering tiles are made of microporous PTFE.

Supplier: Bohlender

Vacuum filters with multi-stage hose connector with integrated lock screw for connecting vacuum tubing with Int.Ø 6 mm or 8 mm. The filters are produced without plasticisers and have an almost universal chemical resistance.

Supplier: Bohlender

Magnetic stirrer heads consist of perfect capsulated drive shaft with ball bearings, rotor and lower bearing made of PTFE and a conductor made of borosilicate glass. These stirrer heads are designed with flat flanges sealed with gasket.

Supplier: Bohlender

PPS screw cap and PTFE body.

Supplier: Bohlender

Replacement shelf with two rails, PMMA transparent, SICCO, Per: Vaccum desiccator

Supplier: Bohlender

Body made of PTFE with 2 connections. Nuts made of glass-fibre reinforced PTFE for connecting tubing or tube.

Supplier: Bohlender

PTFE, white.

Supplier: Bohlender

PTFE, with spout.

Supplier: Bohlender

Base, connessioni testa superiore e frit in PTFE, corpo colonna, riser, tubi di ingresso e uscita in FEP.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel with the stirring unit made completely of PTFE.

Supplier: Bohlender

Assortment of remainder tubing, BOLA

Supplier: Bohlender

Very good electric conductivity due to a special 'anti-static compound' made of pure PTFE and highly pure carbon dust (less than 2,5%).

Supplier: Bohlender

Pipe clamp made of PE with permanently fixed power magnets. b.safe Waste Pipes can easily be clipped into the pipe clamp for tube Ext.Ø 32 mm.

Supplier: Bohlender

Funnel made of PE / static dissipative PE-EX for liquid waste disposal. The funnel can be safely mounted on the waste container with its freely turnable cap that is safely fixed with the filling neck.

Supplier: Bohlender

Adaptor for installation of capillaries with b.safe fittings at the exhaust filter connection of the b.safe waste caps.

Supplier: Bohlender

Filter body made of PE with connection thread for direct installation on barrels. Lid with aeration openings and label field to monitor service life. Filling made of activated carbon for adsorption of solvents.

Supplier: Bohlender

Excellent electric conductivity due to a special 'antistatic compound' made of pure PTFE and finest, highly pure carbon dust (less than 2,5%). Colour: black.

Supplier: Bohlender

Insert with screw-in thread for barrels or screw cap for canisters. With integrated level indicator to monitor the liquid level during filling as well as a neck with GL 45 thread for the assembly of a b.safe funnel with GL 45 thread.

Supplier: Bohlender

Laboratory flask made of Borosilicate glass including screw cap and spout made of PP.

Supplier: Bohlender

Flexible tube tag to stick on capillaries and tubes with Ext.Ø 0,4 to 6,35 mm, assorted colours (5 colours per pack).

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: Bohlender

T-shaped connector made of static dissipative PE-EX.

Supplier: Bohlender

Magnetic stirrer heads designed with gastight permanent magnetic coupling with ball bearing encapsulated in ceramics and square connection for cardan joint.

Supplier: Bohlender

Blue screw cap and distributor body both made of PTFE.

Supplier: Bohlender

PFA, translucent.

Supplier: Bohlender

Magnetic stirrer heads consist of perfect combination of drive shaft with ball bearings, rotor and lower bearing made of PTFE and a conductor made of borosilicate glass.

Supplier: Bohlender

Made of PTFE, white

Supplier: Bohlender

These temperature probe with two independent thermocouples in one PTFE-encapsulated stainless steel tube (1,4571) for parallel temperature measurement in aggressive liquids.

Supplier: Bohlender

Filter disc made of porous PTFE.

Supplier: Bohlender

These frits are made from PTFE.