1191 Risultati per: "Bohlender"

Supplier: Bohlender

Silica gel with colour indicator.

Supplier: Bohlender

Black screw cap made of PPS and available with or without stopcocks. Distributor body made of PTFE with 2 or 3 ports with female thread UNF 1/4" 28 G on upper and lower sides and stopcock made of FEP for each port.

Supplier: Bohlender

Practical collecting tray made of PE or static dissipative PE-EX. Place your waste canister in a collecting tray. Escaping liquids are collected in case of container exchange or leakages.

Supplier: Bohlender

Canister with S60/61 thread (DIN 60/61) for the collection of liquid waste with integrated indicator to monitor the level.

Supplier: Bohlender

Ideal for cutting plastic and rubber tubing with and without textile reinforcement.

Supplier: Bohlender

Protection sheets made from PTFE or FEP.

Supplier: Bohlender

For use as a table pad, slideway or for insulation.

Supplier: Bohlender

PP screw cap, green, distributor body and tubing connectors made from PP

Supplier: Bohlender

Sfere di ebollizione, PTFE, per la prevenzione degli schizzi di reagenti e della formazione di bolle durante la bollitura. Dimensione granuli: 4mm. Confezionate in sacchetti risigillabili. Conformità FDA.

Supplier: Bohlender

GL 14 and GL 18 hose connectors, made of PFA, GL 25 and GL 32 hose connectors, made of PTFE, with elastic sealing lip and FPM O-ring and nut made of PPS.

Supplier: Bohlender

Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.

Supplier: Bohlender

In silicone con rondelle in PTFE

Supplier: Bohlender

This vacuum adapter is made of PTFE with O-ring made of FKM for secure placement of standard filter cartridges made of glass or plastic on vessels and round flasks with ground joint.

Supplier: Bohlender

Y-shaped connector made of PE-EX.

Supplier: Bohlender

Funnel made of PE / static dissipative PE-EX for liquid waste disposal. The funnel can be safely mounted on the waste container with its freely turnable cap that is safely fixed with the filling neck.

Supplier: Bohlender

Replacement shelf with two rails, PMMA transparent, SICCO, Per: Vaccum desiccator

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: Bohlender

Excellent electric conductivity due to a special 'antistatic compound' made of pure PTFE and finest, highly pure carbon dust (less than 2,5%). Colour: black.

Supplier: Bohlender

Very good electric conductivity due to a special 'anti-static compound' made of pure PTFE and highly pure carbon dust (less than 2,5%).

Supplier: Bohlender

Flexible tube tag to stick on capillaries and tubes with Ext.Ø 0,4 to 6,35 mm, assorted colours (5 colours per pack).

Supplier: Bohlender

Filter body made of PE with connection thread for direct installation on barrels. Lid with aeration openings and label field to monitor service life. Filling made of activated carbon for adsorption of solvents.

Supplier: Bohlender

Adaptor for installation of capillaries with b.safe fittings at the exhaust filter connection of the b.safe waste caps.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: Bohlender

T-shaped connector made of static dissipative PE-EX.

Supplier: Bohlender

Insert with screw-in thread for barrels or screw cap for canisters. With integrated level indicator to monitor the liquid level during filling as well as a neck with GL 45 thread for the assembly of a b.safe funnel with GL 45 thread.

Supplier: Bohlender

Laboratory flask made of Borosilicate glass including screw cap and spout made of PP.

Supplier: Bohlender

Pipe clamp made of PE with permanently fixed power magnets. b.safe Waste Pipes can easily be clipped into the pipe clamp for tube Ext.Ø 32 mm.

Supplier: Bohlender

Used for temperature measurement in aggressive liquids and cable provides flexible connection from measuring device to medium.

Supplier: Bohlender

Magnetic stirrer heads consist of perfect capsulated drive shaft with ball bearings, rotor and lower bearing made of PTFE and a conductor made of borosilicate glass. These stirrer heads are designed with flat flanges sealed with gasket.

Supplier: Bohlender

Screw cap made of conductive black PPS-EX reinforced with glass fibres, inner parts made of conductive PTFE-EX.