3515 Risultati per: "Binder"

Supplier: Binder

Standard climate chambers that work with APT.line™ preheating chamber technology.

Supplier: Binder

The KBF-S ECO climatic chambers are very energy-efficient thanks to thermoelectric cooling technology with heat dissipation. The thermoelectric cooling technology means the KBF-S ECO series is also very quiet during operation.

Supplier: Binder

Evaporating Dishes for ED and FD Ovens

Supplier: Binder

Camere climatiche con interni in acciaio inox, ideali per eseguire analisi di materiali e test di invecchiamento. Unità ad alto tasso di scambio dell'aria grazie alla ventola per applicazioni gravose, al dispositivo di sicurezza TWB regolabile di classe 2 con allarme visivo e al condotto di scarico di Ø 50 mm. Tempi brevi di recupero dopo l'apertura dello sportello o cambio d'aria. Impostazione digitale della temperatura. Conformità GLP/GMP grazie all'interfaccia RS422 integrata e al software APT-COM™ DataControlSystem opzionale.

Supplier: Binder

Climatic chamber

Supplier: Binder

Stufe da essiccazione per quantità ridotte di solventi con elevata accuratezza della temperatura e camere in acciaio inox senza silicone e antipolvere. Le unità sono ampiamente utilizzate per applicazioni quali garanzia di qualità di vernici o altri rivestimenti liquidi. Le stufe FDL sono caratterizzate da un controller MP con funzione di aumento progressivo programmabile e timer con programma settimanale integrato con funzione RTC.

Supplier: Binder

The KB PRO series are powerful cooling incubators with energy-efficient cooling with modern inverter cooling unit. The units with proven APT.line™ preheating chamber technology have a temperature range of -20 to +100 °C and comprehensive programming options. The models have a stainless-steel inner chamber and cover a wide range of applications that extend well beyond incubation. Optional light modules are also available to turn the KB PRO into a chamber for ICH photostability testing or plant growth.

Supplier: Binder

The MK series chambers are suitable for all heat and cold tests from –40 to 180 °C. This is an alternative to complex individual solutions for cyclical temperature tests.

Supplier: Binder

The MKT series of dynamic climate chambers has been specially developed as precision heating and cooling chambers for industrial material testing and environment simulation applications. The units are ideal for rapid temperature changes with a low temperature range down to –70 °C and have a higher capacity which exceeds the capability of normal testing chambers. The stainless steel inner chamber has door heating, a heated viewing window with LED interior lighting and programmable condensation protection for the test materials.

Supplier: Binder

Questi incubatori con camera di preriscaldamento con controllo elettronico APT.line™ sono disponibili in due versioni, da scegliere in base all'applicazione: la serie BD con convezione naturale per tutte le applicazioni standard e la serie BF con convezione forzata per applicazioni con carichi elevati.

Supplier: Binder

Accessories for vacuum ovens, VD and VDL ranges

Supplier: Binder

Incubatore compatto con controllo idraulico-meccanico per condizioni di incubazione precise e affidabili. Range ottimale della temperatura a 37 °C. Unità con struttura esterna in lamiera galvanizzata interamente verniciata a polvere per offrire la massima protezione contro la corrosione. Dotato di termostato idro-meccanico e termometro con indicatore analogico.

Supplier: Binder

Le camere di essiccazione e riscaldamento a convezione forzata Avantgarde.Line offrono qualità e affidabilità del processo. Grazie all'ampio range di temperatura fino a 300 °C, queste stufe possono essere utilizzate in tutte le applicazioni. I tempi brevi di riscaldamento e le ampie riserve di potenza le rendono perfette per applicazioni in ambito scientifico, industriale e di ricerca. La tecnologia di preriscaldamento della camera APT.line™ offre una distribuzione omogenea e uniforme della temperatura e fluttuazioni eccellenti. Le unità di capacità massima di 115 litri possono essere impilate per risparmiare spazio. Le unità sono dotate di un isolamento di 60 mm che riduce il consumo energetico e migliora le prestazioni. Tutti i modelli hanno una camera in acciaio inox con sistema ergonomico di apertura dello sportello.

Supplier: Binder

Ripiani, Ripiano in acciaio inox, Per: BF/FD/FED 115

Supplier: Binder

Calibration digital pressure display, including certificate. Measurement at specified pressure, range 20 - 900 mbar, Per: VD and VDL

Supplier: Binder

The KB series with compressor cooling consumes up to 30% less energy compared to its predecessor. Refrigerated incubators are mainly used for culturing tasks that need to be carried out at temperatures below room temperature or if high ambient temperatures cannot be avoided. The cooling system and the controllable fan guarantee high degrees of humidity even during cooling mode, or prolonged testing, to protect samples from drying out even when fully loaded.

Supplier: Binder

Accessories for drying ovens with natural convection ED series, Avantgarde.Line

Supplier: Binder

KMF constant climate chambers ensure constant test conditions throughout the stainless steel chamber even with a full load and only require a small amount of bench space. Units can be operated with Binder Pure Aqua Service, a flexible water purification system (optional) or deionised water. Units self-test for comprehensive status analysis.

Supplier: Binder

A powerful all-rounder among constant climate chambers: Equipped with all kinds of sophisticated technology, the KBF PRO with proven APT.line™ preheating chamber technology takes any material test in its stride – whether it takes place at -20 °C or under THB conditions at +85 °C and 85% relative humidity. Units have a stainless-steel inner chamber and temperature range of -20 to +100 °C and humidity range of 10% to 98% RH. The models offer flexible water supply options for all installation sites and consumes up to 40% less energy than its predecessor, the KMF model. Optional light modules are also available to turn the KBF PRO into a chamber for ICH photostability testing or plant growth.

Supplier: Binder

Vacuum drying ovens with stainless steel inner chambers. All units have a microprocessor controller with two programs, 10 sections each or, alternatively, one program with 20 sections. The time interval of a single program section can be adjusted up to a maximum of 99,59 or 999,59 hours on all program sections. Units have an adjustable TWB Class 2 safety device with visual alarm. GLP/GMP compliance is assisted by the integral RS422 interface and optional APT-COM™ DataControlSystem software.

Supplier: Binder

The KBF series is a proven specialist for reliable ICH stability tests in the pharmaceutical industry: the KBF masters all long-term tests, accelerated tests and stress tests. It fulfills all important ICH requirements, from precision to programming and documentation. With flexible water supply options for all installation locations. The units have a stainless-steel inner chamber and proven APT.line™ preheating chamber technology, feature a temperature range of 0 to +70 °C, and humidity range of 10 to 80% RH, the KBF consumes up to 40 % less energy than its predecessor. With optional light modules, the KBF can be converted into an ICH photostability chamber and a plant growth chamber.

Supplier: Binder

Battery test chambers from BINDER are ideal for aging, performance, and stress tests performed on lithium-ion cells and modules during quality assurance and battery production. Handling lithium-ion batteries can present a variety of potential hazards. System operators need to evaluate the level of risk and counteract it using an appropriate safety concept. The LIT MK series of temperature test chambers from BINDER provides a controllable temperature range of −40 to +110 °C. The units come with extensive safety equipment as standard so that tests on lithium-ion cells can be performed at an anticipated EUCAR hazard level of 6. To ensure maximum safety, all the chambers in the LIT MK series are fitted with detection and fire suppression equipment as standard.

Supplier: Binder

Qualification documents. Hard copy IQ/OQ/PQ documents inside folder - supporting documents for validation performed by customers, according to customer requirements, PQ section added to qualification folder IQ/OQ; parameters: temperature, CO₂, O₂ - or pressure, depending on unit, Per: UF V

Supplier: Binder

Questi congelatori a temperature ultra basse garantiscono la conservazione sicura dei campioni a –90 °C. Essi combinano un'eccezionale compatibilità ambientale con un basso consumo energetico, un funzionamento conveniente e un concetto di sicurezza individuale.

Supplier: Binder

The CBF series CO₂ incubators are the premium series of CO₂ incubators with humidity control. Units are suitable for all sensitive incubation applications and ensure optimal cell growth in GMP environments. A CBF series CO₂ incubator can be used for complex cultivation experiments or individual environments with hypoxic conditions thanks to the comprehensive range of options and accessories. Units ensure consistent results including in cell-based assays with multiwell plates.

Supplier: Binder

The KBWF series plant growth chambers are precise units for plant cultivation under the most up-to-date working conditions with optimum climatic conditions. They provide perfect simulation of a wide range of growing environments, the perfect interaction between heat or cold, humidity and light. The design includes variable position daylight cassettes with five daylight luminescence tubes each. Units self-test for comprehensive status analysis.

Supplier: Binder

Stufa compatta e robusta con termostato idraulico-meccanico e impostazione della temperatura tramite termometro con indicatore a quadrante analogico.

Supplier: Binder

Microscopy and staining reagents, Embedding and mounting media

Supplier: Binder

CO₂ Incubator

Supplier: Binder

The WIC series walk-in-chambers offer a wide range of features and benefits to perfectly meet requirements in stability testing. Perfect test conditions are maintained over a wide range of temperatures from 10 to 50 °C and relative humidity of 20 to 90% RH.