Accessories for glove boxes, Protector®

: LABCONCO

: LABCONCO

10+

Documents

Scheda dati

LBCP5242200_TDS_EN

Product Family Options

Descrizione
LBCP5062020
Mobile base stand, for double glove boxes, with castors

1 * 1 ST
1 * 1 ST - SFr. 6’920.00
SFr. 6’920.00
1 * 1 ST
SFr. 6’920.00
135-1098
Base stand, mobile, with adjustable height (83,8 - 101,6 cm) and PU casters, 1524×1016×838 mm

1 * 1 ST
1 * 1 ST - SFr. 3’600.00
SFr. 3’600.00
1 * 1 ST
SFr. 3’600.00
135-1085
Base stand, stationary, with adjustable height (83,8 - 101,6 cm) and leveling feet, 1524×1016×838 mm

1 * 1 Pce
1 * 1 Pce - SFr. 3’600.00
SFr. 3’600.00
1 * 1 Pce
SFr. 3’600.00
LBCP5242200
Universal exterior glove port covers, molded neoprene, incl. 2 clamps, may be placed over glove ports to facilitate and expedite the evacuation/fill operation and preserve inert atmosphere

1 * 1 ST
1 * 1 ST - SFr. 207.00
SFr. 207.00
1 * 1 ST
SFr. 207.00
LBCP5441300
Blower foot switch (foot pedal and power cord), provides a hands-free means to temporarily shut off power to the blower when obtaining sensitive balance readings or manipulating fine powders

1 * 1 ST
1 * 1 ST - SFr. 706.00
SFr. 706.00
1 * 1 ST
SFr. 706.00
LBCP5442201
Moisture monitor (dew point measurements), 0 - 6000 ppm; incl. meter, probe, attachment plug, and calibration stand; for placement inside the glove box’s main chamber; 140×203×46 mm, 230 V, 50/60 Hz

1 * 1 ST
1 * 1 ST - SFr. 6’750.00
SFr. 6’750.00
1 * 1 ST
SFr. 6’750.00
LBCP5440800
Hard duct connector, epoxy coated steel, for connecting the glove box to ductwork attached to a remote blower (Requires ductwork and remote blower)

1 * 1 ST
1 * 1 ST - SFr. 602.00
SFr. 602.00
1 * 1 ST
SFr. 602.00
LBCP5440900
Thimble exhaust connector, Ø 152 mm, epoxy coated steel, for connection to house exhaust or remote blower

1 * 1 ST
1 * 1 ST - SFr. 757.00
SFr. 757.00
1 * 1 ST
SFr. 757.00
LBCP5441100
Recirculation kit, incl. hose, clamps and epoxy-coated steel adapter, allows the built-in blower exhaust to be connected to the inlet HEPA/ ULPA filter

1 * 1 ST
1 * 1 ST - SFr. 701.00
SFr. 701.00
1 * 1 ST
SFr. 701.00
LBCP5441200
Positive pressure conversion kit, incl. hose, two clamps and harness assembly, changes the built-in blower operation from standard negative pressure to positive pressure operation

1 * 1 ST
1 * 1 ST - SFr. 701.00
SFr. 701.00
1 * 1 ST
SFr. 701.00
LBCP5441400
Kit with HEPA filter and hose barb canister Ø 13 mm, for placing between the glove box and vacuum pump to protect the pump from particulate contaminants

1 * 1 ST
1 * 1 ST - SFr. 856.00
SFr. 856.00
1 * 1 ST
SFr. 856.00
LBCP5441403
Kit with HEPA filter, hose barb connectors and 10' of 3/4" ID neoprene tubing for attachment to the pressure relief bubbler exhaust

1 * 1 ST
1 * 1 ST - SFr. 941.00
SFr. 941.00
1 * 1 ST
SFr. 941.00
LBCP5441401
Replacement HEPA filter, 99,99% efficient on 0,03 micron particulates; for use with 5441400 or 5441403 kit

1 * 1 ST
1 * 1 ST - SFr. 363.00
SFr. 363.00
1 * 1 ST
SFr. 363.00
LBCP5225703
Add-a-valve installation kit, incl. hole saw, arbor and instructions; for use with fiberglass-lined glove boxes only

1 * 1 ST
1 * 1 ST - SFr. 121.00
SFr. 121.00
1 * 1 ST
SFr. 121.00
LBCP5442600
Two manual valves for transfer chamber

1 * 1 ST
1 * 1 ST - SFr. 1’630.00
SFr. 1’630.00
1 * 1 ST
SFr. 1’630.00
LBCP5442700
Two manual valves for main chamber

1 * 1 ST
1 * 1 ST - SFr. 1’390.00
SFr. 1’390.00
1 * 1 ST
SFr. 1’390.00
LBCP5060400
Interior glove port cover, for Protector® glove boxes

1 * 1 ST
1 * 1 ST - SFr. 1’600.00
SFr. 1’600.00
1 * 1 ST
SFr. 1’600.00