You searched for: Reagenti per microscopia e colorazione

Supplier: Merck

Entellan® new è una nuova soluzione di montaggio per montavetrini ed è particolarmente adatta per strumenti commerciali di montaggio automatizzati utilizzati unitamente a montavetrini. Ha un range di viscosità di 250 - 600 mPas, il cod. prod. 1,00869 ha un range inferiore. Questo basso range di viscosità migliora e accelera l'applicazione, in quanto non occorre ripristinare il tasso di erogazione o il volume dopo il primo ciclo con un nuovo flacone di Entellan® new.

Supplier: Merck

Aquatex is used for e.g. LEUCOGNOST stained specimens. For preservation purposes and subsequent optimal microscopy, the stained sections are normally mounted using a suitable mounting agent and covered with a cover glass.

Supplier: SIGMA ALDRICH MICROSCOPY

The Epoxy Embedding Medium Kit is a very widely used embedding medium for electron microscopy. The embedding formulation originally published by Luft (1961) is excellent for both plant and animal tissues. Due to the low viscosity of the resin, it penetrates the tissue specimen faster than Araldite and other polymers. It hardens easily and uniformly at low temperatures with the addition of dodecenylsuccinic anhydride (DDSA), methyl nadic anhydride (MNA), and the accelerator 2,4,6-tris(dimethylaminomethyl)phenol (DMP-30). Slight shrinkage may occur during curing. This kit is useful for embedding a variety of tissues as a wide range of hardness can be obtained with this resin to suit a specific tissue type by using two different anhydride curing agents (DDSA and MNA).

Supplier: SIGMA ALDRICH MICROSCOPY

For use with Osteo-bed bone embedding kit. Solvent for removal of plastic from sections prior to rehydration and staining. Most histochemical and immunohistochemistry staining protocols require the removal of methyl methacrylate (MMA) and rehydration of mounted sections for improved stain penetration and greater contrast.

Supplier: SIGMA ALDRICH MICROSCOPY

CC/mount is an aqueous based permanent mounting medium with a very high refractive index, which when applied to the stained tissue sections can store the tissue specimens permanently without the fading of the chromogens. Because of the superior refractive index of CC/mount, tissues mounted in this medium look like specimens mounted with organic based mounting media. No coverslipping is required with CC/mount. However, if coverslipping is required, dried CC/mount can be post mounted by using an organic based mounting medium. CC/mount permits the long-term storage of antigens localised using organic insoluble chromogen substrates, including AEC, DAB, Fast Red, BCIP/NBT, BCIP/INT and fluorescent dyes like FITC and phycobiliproteins. The high pH of CC/mount ensures increased stability of fluorescence intensity.

Supplier: SIGMA ALDRICH MICROSCOPY

to be used with SIAL 78711 RenLam M-1 (Epoxy Embedding Medium)

Supplier: SIGMA ALDRICH MICROSCOPY

To be used with SIAL 69571 Ren HY 956 (Hardener for Epoxy Embedding Medium)

Supplier: SIGMA ALDRICH MICROSCOPY

Fluoroshield™ is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.

Supplier: VWR Chemicals

High viscosity mounting media for cryotomy. Less viscous than O.C.T.

Supplier: VWR Chemicals

La soluzione Q Path® Cytofix è un fissativo comunemente utilizzato in citologia. È particolarmente adatta e consigliata per urina, citologia su fluidi pleurali o peritoneali, lavaggi broncoalveolari e campioni cervicali/vaginali. Il fissativo combina le qualità coagulanti dell'alcol per consentire un miglior fissaggio di elementi nucleari e citoplasmatici. Gli eritrociti vengono lisati e, di conseguenza, non oscurano l'osservazione degli elementi di interesse. Il fissativo può essere utilizzato attenendosi al metodo Saccomanno.

Supplier: VWR Chemicals

When sectioning frozen tissue for rapid surgical biopsy diagnosis or for research (typically in Histochemistry), the tissue sample must be firmly attached to the microtome stage or chuck. Embedding material such as OCT are preferred as these also provide a supportive and protective aid to sectioning.

Supplier: VWR Chemicals

mezzo montante ad elevata viscosità per criotomia.

Supplier: Avantor

Mezzo di montaggio per la copertura dei vetrini.

Supplier: Merck

M-FIX is a fixative spray designed for the wet fixation of gynaecological and non-gynaecological preparations processed in Papanicolaou staining. It contains polyglycols in alcoholic solution and a rapid and secure fixation of specimens is possible.

Supplier: SIGMA ALDRICH MICROSCOPY

Fluoroshield™ with PPD (p-phenylenediamine; 1,4-phenylenediamine) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.

Supplier: SIGMA ALDRICH MICROSCOPY

Epoxy embedding medium is generally used for biological tissues during study by electron microscopy. Usually, it consists of three components; Epon 812 resin, an anhydride hardener and an accelerator

Supplier: SIGMA ALDRICH MICROSCOPY

JB-4 is a water-soluble, GMA based, plastic resin kit intended for use in the preparation of embedded samples for high resolution light microscopy. It is a technique now widely used for research and clinical diagnosis. JB-4 yields semi-thin sections (0.5μ-2μ) with excellent morphological preservation.

Supplier: SIGMA ALDRICH MICROSCOPY

Araldite® is an epoxy resin commonly used for embedding. It is basically free from polymerization damage and the plastic does not sublime in the microscope, hence providing continual support and preservation of fine detail.[1] It is composed of araldite M or CY 212, dodecenyl succinic anhydride, dibutyl phthalate and 2,4,6-tridimethylamine methyl phenol.

Supplier: SIGMA ALDRICH MICROSCOPY

Hartman′s fixative, which is also known as Davidson′s Fixative, contains acetic acid, alcohol, and formalin. It is widely used for the preservation of eye, bone marrow, breast, testis, and other tissues for histologic examination

Supplier: VWR Chemicals

Q Path® Safesolv è l'alternativa non pericolosa allo xilene o al toluene. È compatibile con la soluzione di montaggio Q Path® Safemount (riferimento 00647520). Viene utilizzato al posto di xilene, toluene, metilcicloesano o altri solventi nel corso delle fasi di disidratazione di campioni istologici e nella colorazione e nel montaggio delle lamelle.

Supplier: VWR Chemicals

VWR® Bouin tissue fixative solution.

Supplier: VWR Chemicals

Contenenti una miscela di acidi cloridrici. Pronti all'uso per applicazioni in laboratori istologici e patologici. Volume consigliato: 20 volte il volume del frammento.

Supplier: VWR Chemicals

Q Path® Labofix è un fissativo spray per citologia in grado di fissare e conservare elementi cellulari ottenuti da strisci ginecologici e non ginecologici dopo la loro distribuzione su un vetrino.

Supplier: VWR Chemicals

DC1 slow acting decalcifiers contain a mixture of formic acid and formalin.

Supplier: VWR Chemicals

Montaggio sulla base di alcol isopropilico. Compatibile con la maggior parte degli agenti alternativi ai solventi. Adatto per montaggio manuale e automatizzato di vetrini. Flacone in PET da 500 ml.

Supplier: VWR Chemicals

Fixing solution with 0,02% formaldehyde in methanol 50% (v/v)).

Supplier: VWR Chemicals

Safemount Q Path® è una soluzione di montaggio, fornita in un flacone in PET, compatibile con Safesolv. Consente di incollare il vetrino coprioggetto al vetrino e fissa la sonda in posizione dopo la colorazione.

Supplier: VWR Chemicals

Fixing solution with 0,02% formaldehyde and 0,01% citric acid in aqueous solution.

Supplier: VWR Chemicals

Contains a mixture of hydrochloric acid and alcohols with some EDTA.

Supplier: Avantor

Microscopy and staining reagents, J.T.Baker®, Fissativo spray per cervice