Hai cercato: Raccordi e connettori

Supplier: CADENCE SCIENCE

FLL to M5 × 6 mm thread (plated brass), Acciaio inossidabile, Filettatura: 0,125" NPT

Supplier: AGILENT HEWLETT PACKARD

¹/₁₆" brass tees, Ottone

Supplier: VICI JOUR RESEARCH

PEEK one-piece fingertight fittings. 10-32 threads, for 1/16" tubing. Fingertight up to 350 bar (5000 psi).

Supplier: UPCHURCH SCIENTIFIC

One piece super flangeless fitting is ideal for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing.

Supplier: AGILENT HEWLETT PACKARD

PEEK adapter 1/4-28 to 10-32, PEEK

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, UH-700 VHP MicroTee for 1/32" OD tubing, 5/16-24 coned threads, 0,25 mm thru-hole, 84 nl swept volume, PEEK/stainless steel, Acciaio inossidabile

Supplier: UPCHURCH SCIENTIFIC

ETFE or PEEK.

Supplier: UPCHURCH SCIENTIFIC

PEEK. Ideal for infusing samples into lab-on-a-chip devices. This product introduces only 14 nl of additional volume to the flow path. Use it to directly connect a Luer-tip syringe or other product that terminates with a standard male Luer to 360 µm ext. Ø capillary tubing without tubing sleeves. MicroTight® fittings are included.

Supplier: OMNIFIT

Omni-Lok™ inverted cone fittings provide a simple, easy to use low-pressure connection. Only the ETFE cone is in the fluid path.

Supplier: UPCHURCH SCIENTIFIC

PEEK, acciaio inossidabile o PCTFE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, Connector, tubing, P-801 barbed connectors for use with 1/16” I.Ø tubing, PP

Supplier: SEMADENI

Connectors, T-piece, made of POM, white, strong design, temperature resistant up to 100 °C.

Supplier: SEMADENI

Connectors, Y-shaped, made of POM, white.

Supplier: SEMADENI

PP, translucent.

Supplier: VICI JOUR RESEARCH

These PEEK adapters connect standard LC fittings to standard LC ports, usable with most common organic and inorganic HPLC solvents without risking corrosion, metal contamination, or protein degradation.

Supplier: OMNIFIT

Flanged tubing system is used for economical low pressure connection. A flanging washer is placed between the flange and the fitting nut. When screwed into a flat-bottom, the flange is compressesed against the bottom of the port to produce a seal.

Supplier: VICI JOUR RESEARCH

PEEK with titanium filter element.

Supplier: VICI JOUR RESEARCH

Fiberglass reinforced PP with PP washers. A number of chromatography systems still require or prefer flanged connections. When the tubing is flanged, the washer never comes in contact with the mobile phase.

Supplier: DWK Life Sciences

Hose connector, 13-425

Supplier: SEMADENI

Tubing connector, made of HDPE, with taper ends.

Supplier: NEOLAB

Tube Luer-connector with olive and Luer-Lock cone.

Supplier: Mettler - Toledo

Ferrule for tubing and sensors, ETFE, For tubing ext.Ø: 1,6 mm

Supplier: VICI JOUR RESEARCH

PEEK tees and crosses, high pressure, for easy connection of solvent lines.

Supplier: NEOLAB

One-way cordoning high-grade steel quick connect couplings.

Supplier: VICI JOUR RESEARCH

HPLC-Kit 2

Supplier: VICI JOUR RESEARCH

These plugs and caps are used for plugging ports and capping solvent lines.

Supplier: VICI JOUR RESEARCH

These fingertight PP adapters are used with ¹/₄" PEEK and stainless hex-head nuts, converting them into colour coded fingertight fittings.

Supplier: SEMADENI

PP, gray.

Supplier: VICI JOUR RESEARCH

Low pressure adapter, PP, male luer to 1/4”-28 female, PP

Supplier: VICI JOUR RESEARCH

Questi raccordi VICI Jour sono dotati di una speciale doppia ferrula in PEEK che si aggancia al tubo in due punti per garantire maggiore sicurezza, in particolare con tubi in PEEK o Tefzel. Adatti per qualsiasi raccordo femmina 1/16', ad es. Parker, Swagelok, Waters, Valco, Rheodyne, Upchurch.