You searched for: Raccordi e connettori

Supplier: UPCHURCH SCIENTIFIC

PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.

Supplier: UPCHURCH SCIENTIFIC

In PEEK o PCTFE

Supplier: VICI JOUR RESEARCH

One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.

Supplier: VICI JOUR RESEARCH

Ferrule, SS bushing, PEEK, For tubing ext.Ø: 1/32"

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: UPCHURCH SCIENTIFIC

These female M6 adapters are made from PEEK, EFTE or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® NanoTight™, F-333N, fitting and sleeves, long, PEEK natural/ETFE natural, headless knurl, 10-32 coned port, for 1/16" OD tubing, 4000 psi

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: UPCHURCH SCIENTIFIC

Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.

Supplier: SHIMADZU

High-Performance fittings for liquid chromatography simple, hand-tightened connections for all LC applications achieve zero dead volume with Titanium and PEEK technology high-pressure, reusable connections for HPLC and UHPLC.

Supplier: UPCHURCH SCIENTIFIC

Raccordi riutilizzabili in lega di acciaio inox e polimero PEEK brevettato. Utilizzabili per massimo 10 cicli senza rischio di danneggiare le tubazioni o compromettere la capacità di sostegno o carry-over. Valore di pressione nominale fino a 30 000 psi (2070 bar). Coppia richiesta 1,10 N-m (10 in-lbs) / 1,6 N-m (14 in-lbs).

Supplier: UPCHURCH SCIENTIFIC

These PEEK adapters make connections to female ¹/₈" and ¹/₄" National Pipe Thread (NPT) ports.

Supplier: CADENCE SCIENCE

Luer to closed end thread 1/16 - 3/32", Ottone

Supplier: UPCHURCH SCIENTIFIC

These fittings are made from stainless steel.

Supplier: Lenz Laborglas GmbH & CO.KG

Connectors, made of PBT, red with integrated silicone (VMQ)-PTFE sealing.

Supplier: VICI JOUR RESEARCH

PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: UPCHURCH SCIENTIFIC

PP or ETFE. Use these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications, such as plumbing Ismatec® peristaltic pumps. Due to the low melting point of PP, these adapters are not autoclavable, however, they can be sterilised via gamma radiation. The ETFE connectors have superiour solvent resistance and a higher temperature rating (80 °C).

Supplier: SEMADENI

Connectors for easy installation on any plastic containers by means of counter screw.

Supplier: VICI JOUR RESEARCH

VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.

Supplier: VICI JOUR RESEARCH

Connectors for low pressure applications are machined from PEEK.

Supplier: TOSOH Bioscience

These fittings and frits are made of 316-grade stainless steel.

Supplier: OMNIFIT

Gripper nut, PP, brown, for 1/16" tubing, PP

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Quick-connect coupling and plug connection, made of acetal (POM) for a complete connection.

Supplier: UPCHURCH SCIENTIFIC

Made of stainless steel or PEEK.

Supplier: Bohlender

For connection of sensors with male thread PG to BOLA reactor lids.

Supplier: Thermo Fisher Scientific

Use these connector kits, sleeves, and tees with EASY-Column™ capillary columns.

Supplier: SEMADENI

PP, natural

Supplier: UPCHURCH SCIENTIFIC

Giunti privi di volume morto, PEEK: I giunti ZDV (Zero-dead-volume, privi di volume morto) vengono forniti con due raccordi a serraggio manuale F-300 per tubi con diametro esterno di ¹/₁₆" e hanno un valore di pressione nominale di 5000 psi (344 bar).

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® LiteTouch®, F-354, nut, stainless steel, 10-32 coned port, for 1/16" or 1/32" OD tubing, flushnut, 5000 psi, Acciaio inossidabile