Hai cercato: Raccordi e connettori

Supplier: Bohlender

T-shaped connector made of static dissipative PE-EX.

Supplier: Avantor Fluid Handling

Create a secure connection with threaded fittings.

Supplier: Avantor Fluid Handling

Twist-to-Connect locking mechanism protects against accidental disconnects.

Supplier: Avantor Fluid Handling

No more kinked tubing—allows tubing to rotate freely.

Supplier: CPC COLDER

Class VI coupling body plug with Class VI silicone O-ring.

Supplier: Avantor Fluid Handling

Quick and easy assembly without tools.

Supplier: ENTEGRIS

These integral ferrule fittings are made from PFA.

Supplier: ENTEGRIS

These tube fittings are made from PFA.

Supplier: ENTEGRIS

These tube fittings are made from PFA.

Supplier: Bohlender

Connector, screw thread coupling, made of PTFE. Two screw caps made of PPS or PBTP with GL thread and a PTFE/FPM gasket. The product is only exposed to PTFE.

Supplier: Bohlender

Vario 2-part coupling to connect elastic tubing with non-elastic tubing made of PTFE, glass, metal or other plastics.

Supplier: Avantor Fluid Handling

High-quality tri-clamp to hose barb fittings in 316 stainless steel for sanitary applications.

Supplier: CPC COLDER

NSH Series couplings are general purpose versions of our pressure-balanced, non-spill, ChemQuik® CQG06 couplings. Moulded polypropylene, EPDM seals and a 100% springless and metal-free flow path provide broad chemical resistance and exceptionally high flow capacity, allowing instant disconnects (and reconnects), even under pressure.

Supplier: Bohlender

Fittings made of PE to fix tubing in the capillary connectors (thread UNF ¹/₄" 28G) of b.safe Caps PFAS Analytic.

Supplier: BURKLE

Universal thread adapter for nearly all drums and other containers with opening of 48 to 75 mm in diameter, regardless of the respective thread.

Supplier: DWK Life Sciences

DURAN® GL 25 connector caps with multiple ports are suitable for a range of applications were small volumes of liquid need to be sampled or dispensed.

Supplier: B. Braun

PVC extension connectors.

Supplier: ENTEGRIS

The Sentry® QCIII Quick Connect System is the safest and easiest method of connecting FluoroPure® chemical containers with typical bulk chemical delivery systems. This patented connection system is key coded and uses Entegris' industry leading Flaretek® seal for the main chemical dispense line and radial seals for the remaining three ports. This new system allows the connection to be made without realigning key codes. Subsequent ports have radial seals with FEP encapsulated o-rings. This chemical dispense system incorporates a ³/₄" chemical fill/dispense port, ½" vent port, ¼" connection verification port and optional ³/₄" recirculation port.

Supplier: Bohlender

PTFE/FPM and PS.

Supplier: Bohlender

Straight tube fitting, made of PTFE, with one screw-in thread (either NPT or G thread).

Supplier: Trajan Scientific and Medical

Nut, 1/8" hole (extended), stainless steel, Acciaio inossidabile

Supplier: DWK Life Sciences

These flanges are available with or without groove.

Supplier: Trajan Scientific and Medical

SilTite™, Replacement SilTite™ mini union ferrules, for 0,1 - 0,25 mm ID columns

Supplier: Bohlender

GL 14 and GL 18 hose connectors made of PFA, GL 25 and GL 32 hose connectors made of PTFE with elastic sealing lip and FPM O-ring.

Supplier: Bohlender

Tube fitting made of PTFE with nuts made of glass-fibre reinforced PTFE.

Supplier: CPC COLDER

Connectors provide quick and easy sterile connections for small-flow applications, even in non-sterile environments.

Supplier: CPC COLDER

Couplings allow rapid disconnect and reconnect with one hand and without the need for tools.

Supplier: Avantor Fluid Handling

Ultra-clean and reliable fittings for highly critical and corrosive chemicals.

Supplier: Avantor Fluid Handling

Convenience of a quick-disconnect in pressure and vacuum applications.

Supplier: Avantor Fluid Handling

Get a secure seal at higher pressures.