Hai cercato: Standard per viscometria

Supplier: VWR Chemicals

Silicone Rotational viscosity standards are specifically formulated for use with equipment with minimal temperature control. Supplied in 600 ml 'ready to use' packs specially designed to eliminate cleaning of laboratory glassware, which is inherently difficult due to the nature of silicone.

Supplier: VWR Chemicals

Flow Cup viscosity standards are specifically formulated for use with viscosity flow cups such as Ford, Shell and Zahn.

Supplier: VWR Chemicals

Pure Water viscosity standard have certified data for kinematic viscosity, dynamic viscosity and density at 5, 20, 25 and 37 °C.

Supplier: VWR Chemicals

These standards are certified in strict accordance with ASTM D2162 at 40 and 100 °C under ISO 17025 and ISO 17034 accreditation, and have been manufactured specifically for the users of ASTM D7279, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer and other similar type test equipment.

Supplier: VWR Chemicals

High Temperature viscosity standards are ideal for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely.

Supplier: VWR Chemicals

High quality Cone and Plate viscosity standards are ideal for the paints and coatings industry.

Supplier: VWR Chemicals

Mineral Oil Rotational viscosity standards are specifically formulated for use with rotational viscometers and are dual-certified to ISO 17025 and ISO 17034 under UKAS.

Supplier: VWR Chemicals

Low Temperature viscosity standards have certified data for kinematic viscosity, dynamic viscosity and density for various low temperatures.

Supplier: Thermo Fisher Scientific

Viscosity standard, Nominally 50cSt at 40 and 7.3cSt at 100°, Specpure™, Viscometry Standards

Supplier: VWR Chemicals

These ISO 17025 and ISO 17034 certified general purpose viscosity standards provide certified kinematic viscosity, dynamic viscosity and density data across temperature ranges from 20 to 100 °C.

Supplier: VWR Chemicals

The viscosity values for certified viscosity check oils have been tested and certified at typical blend targets. These check oils are for validating the performance of cold cranking simulator and kinematic viscometers by measuring commercially available formulated engine oils.

Supplier: Thermo Fisher Scientific

Viscometry Standards, Viscosità a 40 °C: 930±6 cSt, Viscosità a 50 °C: 82 cSt

Supplier: VWR Chemicals

Standard utilizzabili per calibrazione, controllo, verifica, qualificazione o validazione del metodo di strumenti di misurazione della viscosità dinamica e cinematica (sia automatici che manuali). Ogni standard è certificato per viscosità cinematica (mm²/S, cSt), viscosità dinamica (cP) e densità (g/ml) a un determinato intervallo di temperatura.

Supplier: VWR Chemicals

Paints and coatings viscosity standards provide certified kinematic viscosity, dynamic viscosity, density and (where applicable) Krebs data across temperature ranges at 20, 23 and 25 °C, also includes the calculated flow time of the oil in 0,5 °C intervals. Ideal for those in the paint and coatings industry.

Supplier: VWR Chemicals

High quality CCS viscosity standards are ideal for the calibration and verification of analytical equipment used in Cold Cranking Simulator (CCS) testing.

Supplier: VWR Chemicals

Medical Grade viscosity standards provide certified dynamic viscosity data at 25 and 37 °C, are dual-certified to ISO 17025 and ISO 17034 under UKAS and are ideal for the calibration and verification of viscosity measuring equipment.

Supplier: PerkinElmer

Nominal viscosity: 30 cSt at 40 °C and 5,3 cSt at 100 °C, 3,8 l, Viscometry Standards, Hydrocarbons

Supplier: LGC Standards PROMOCHEM

These standard solutions are intended for use as a certified reference materiasl and calibration standards for viscometric instrumentation, using ASTM Method D445 and other viscometric methods.

Supplier: HAAKE

Test and certificated fluids for viscometery - mesurement temperature at 20 °C unless indicated.

Supplier: LGC Standards PROMOCHEM

This proficiency testing program (PTP) was specially designed to give analytical laboratories instant validation while measuring viscosity in new and used oils.