Hai cercato: Bruciatori a gas
Simple to adjust the intensity level, the gas burners apply direct heat to materials using acetylene, natural gas, or propane fuel. Regulating valves change the air and gas flow for optimal testing control. The open flame devices are laboratory staples since the consistent heat source enables accurate reactions and sterilization. For maximum safety, the standard gas burners have bases that guarantee the hazardous instruments remain stable for accident-free operation.
Base di sicurezza per bruciatori
Supplier: USBECK Laborgeräte
Riscaldatore, Gas burner, Base di sicurezza per bruciatori, per la massima stabilità e protezione delle superfici di lavoro
Expand 1 Items
Bunsen Fuego SCS
Supplier: WARTEWIG
Bunsen Fuego SCS basic bruciatore a gas da laboratorio per la massima sicurezza. Il modello Fuego SCS basic stabilisce nuovi standard nelle tecnologie di bruciatori a gas da laboratorio. Grazie al design innovativo, il bruciatore da laboratorio è adatto per tutte le applicazioni che richiedono combustione tramite fiamma in laboratorio. Il bruciatore può essere azionato in modo semplice e sicuro tramite un controllo a pedale (da ordinare separatamente). Sono disponibili due programmi diversi: funzionamento con avvio/arresto flessibile o funzionamento convenzionale con controllo a pedale per brevi periodi di uso.
Expand 1 Items
Safety burners with stopcock
Supplier: USBECK Laborgeräte
This safety burner provides protection against uncontrolled escape of gas in laboratories. If the flame is extinguished, the gas supply is interrupted and no unburnt gas can escape.
Expand 2 Items
Burner, Teclu, with stopcock
Supplier: USBECK Laborgeräte
Burner for natural gas, adjustable. Maximum temperature of 1620 °C.
Expand 1 Items
Safety burners with connection thread
Supplier: USBECK Laborgeräte
Safety burners provide protection from the uncontrolled escape of gas in laboratories. The heat of the pilot flame generates an electric voltage within the thermocouple.
Expand 4 Items
Cartridge burner, high temperature
Supplier: USBECK Laborgeräte
High temperature burner with piezo electric ignition and needle valve. Maximum temperature of 1600 °C.
Expand 1 Items
Cartridge burner, Teclu
Supplier: USBECK Laborgeräte
Cartridge burner with air regulation. Maximum temperature of 1640 °C.
Expand 1 Items
Meker burners with needle valve
Supplier: USBECK Laborgeräte
Meker burner with air regulation, suitable for all gases. With needle valve.
Expand 3 Items
Becco Bunsen a cartuccia
Supplier: USBECK Laborgeräte
Stainless steel burner for propane/butane mix. For temperatures up to 1400 °C.
Expand 2 Items
Micro burners with needle valve
Supplier: USBECK Laborgeräte
Micro burner with air regulation and needle valve.
Expand 2 Items
Micro burner with needle valve, cartridge type
Supplier: USBECK Laborgeräte
Micro burner with piezo electric ignition and air regulation. Maximum temperature of 1640 °C.
Expand 1 Items
Burner, Teclu
Supplier: USBECK Laborgeräte
Nickel plated brass base, in powder coated grey.
Expand 9 Items
Bunsen burners
Supplier: USBECK Laborgeräte
These air regulated bunsen burners have a double lever stop-cock with pilot flame inside.
Expand 3 Items
Becco Bunsen, tipo a cartuccia
Supplier: USBECK Laborgeräte
Bunsen in ottone placcato nickel per riscaldamento o sterilizzazione degli strumenti e della vetreria da laboratorio.
Expand 1 Items
Accendigas, piezoelettrico
Supplier: USBECK Laborgeräte
Lunghezza: 220 mm
Expand 1 Items
Becco Bunsen
Supplier: USBECK Laborgeräte
Ottone nichelato con piede in ghisa.
Expand 3 Items
Becco Bunsen
Supplier: USBECK Laborgeräte
Ottone nichelato con piedini in ghisa.
Expand 9 Items
Burner head, butterfly design
Supplier: USBECK Laborgeräte
Nickel plated brass.
Expand 1 Items
Blowpipes for Usbeck burners
Supplier: USBECK Laborgeräte
Riscaldatore, Gas burner, Cannello, con imboccatura in legno, in ottone nichelato, lunghezza: 250 mm
Expand 1 Items
Bunsen burners, LabFlame
Supplier: BioTool
Stainless steel Bunsen burners, with removable burner head. The optimised air-flow system allows a uniform and constant flame even in safety cabinets with horizontal or vertical air flow. All controls for gas and air supply as well as the multifunctional control for the modes of operation are conveniently located on the easy to read display.
Expand 2 Items
LabFlame+ Bunsen Burner, with Integrated NIMI (AA)
Supplier: BioTool
The LabFlame+ is optimised for use in microbiology laboratories. Its stainless steel housing is made of one piece, free of any gaps or rims and therefore easy to clean and fully UV resistant. Its optimised air-flow system allows a uniform and constant flame. Connectable to any kind of gas sources. Ideal for use in cleanroom workbenches and laboratories.
Expand 1 Items
Bunsen burner
Supplier: GLASWARENFABRIK KARL HECHT
All gas bunsen burner with air regulation, needle valve and adjustable nozzle.
Expand 1 Items
Bunsen burners
Supplier: GLASWARENFABRIK KARL HECHT
Bunsen burners with air regulation. Head ~ Ø15 mm.
Expand 1 Items
Burner system components for AAS
Supplier: PerkinElmer
Burner system components for AAS, Gas burner, Viton o-ring burner head
Expand 8 Items
Gas lighter, Piezoelectric, SP Bel-Art
Supplier: Bel-Art Products, a Part of SP
For lighting Bunsen burners, gas stoves, propane or oxy-acetylene torches safely.
Expand 1 Items
Gas burners, Teclu
Supplier: GLASWARENFABRIK KARL HECHT
Gas burners according to Teclu, with stopcock and pilot flame.
Expand 1 Items
Supplier: EPPENDORF
Supplier: Integra
Supplier: Liebherr
Supplier: OZ BIOSCIENCES
Supplier: VWR Collection
Supplier: Corning
Supplier: SenseAnywhere
Supplier: Integra
Supplier: NANOENTEK
Supplier: VWR Collection
Supplier: Integra
Supplier: Testo
Supplier: Sartorius
Supplier: Quantabio