Order Entry
Switzerland
ContactUsLinkComponent
28 risultati per Supporti

Hai cercato: Supporti

Supporti

Supports are designed to hold specific-sized samples and equipment for safe reaction testing procedures. With strong construction, the devices act as protective barriers to keep the benchtop surface and handlers safe from intensely heated samples or harsh solvents. Stands will also precisely position the supplies for specific requirements and allow researchers both hands for maximum working efficiency. The supports give employed instruments the stabilization needed for a controlled and accurate analysis.

Ordina per
Cork Rings for Round Bottom Flasks

Cork Rings for Round Bottom Flasks

Supplier: USBECK Laborgeräte

Supporti per matracci, Sughero, Per: 2000 ml, Ø est.: 170 mm, Ø interno inferiore: 120 mm, Altezza: 30 mm

Expand 4 Items
Caricamento...
VWR®, Anelli in sughero per palloni a fondo tondo

VWR®, Anelli in sughero per palloni a fondo tondo

Supplier: VWR Collection

Il supporto ideale per palloni a fondo sferico e altri analoghi contenitori in vetro. Sughero compresso, naturale.

Expand 7 Items
Caricamento...
Supporti per palloni a fondo tondo

Supporti per palloni a fondo tondo

Supplier: Saint Gobain Life Sciences

Garantiscono una posizione sicura dei palloni e di altri recipienti a fondo tondo. Utilizzabili su entrambi lati. Antiscivolo, morbidi, impilabili e facili da pulire. Silicone, blu.

Expand 3 Items
Caricamento...
Holder for round bottom flasks

Holder for round bottom flasks

Supplier: SciLabware

This stand is suitable for most round bottomed flasks.

Expand 1 Items
Caricamento...
Cork rings for round bottom flasks

Cork rings for round bottom flasks

Supplier: GLASWARENFABRIK KARL HECHT

Supporti per matracci, Sughero, Per: 2000 ml

Expand 3 Items
Caricamento...
Carrier for round bottom flasks, IKA®

Carrier for round bottom flasks, IKA®

Supplier: IKA

This flask carrier with handle is constructed from anodised aluminium.

Expand 1 Items
Caricamento...
Holders for round bottom flasks, Flaskup™, SP Bel-Art

Holders for round bottom flasks, Flaskup™, SP Bel-Art

Supplier: Bel-Art Products, a Part of SP

Holders made from PP for round bottom flasks.

Expand 4 Items
Caricamento...
Supporti per becher e fiasche, SP Bel-Art

Supporti per becher e fiasche, SP Bel-Art

Supplier: Bel-Art Products, a Part of SP

Anello in piombo, con rivestimento rosso in vinile e 4 morse in acciaio inossidabile. Per mantenere in posizione i bicchieri e i matracci. Ideale per l'impiego in bagnomaria, in quanto l'acqua può circolare sotto il fondo del recipiente.

Expand 2 Items
Caricamento...
Supporti per palloni a fondo tondo

Supporti per palloni a fondo tondo

Supplier: KARTELL

Supporto sicuro e antiscivolo per i palloni e per altri recipienti con fondo tondo. Gli anelli interni concentrici consentono l'alloggiamento di palloni da 10 ml a 10 l. PP, bianco. Circolare con interno a gradini.

Expand 1 Items
Caricamento...

Cork rings for round bottom flasks

Supplier: BRAEMSWIG

Supporti per matracci, Sughero, Per: 1000, 2000 ml, Ø superiore: 140 mm, Ø interno inferiore: 90 mm, Altezza: 30 mm

Expand 3 Items
Caricamento...
VWR®, Piastre in sughero

VWR®, Piastre in sughero

Supplier: VWR Collection

In sughero naturale.

Expand 5 Items
Caricamento...
Imbottiture di supporto per flaconi per centrifuga, Corning®

Imbottiture di supporto per flaconi per centrifuga, Corning®

Supplier: Corning

PP tubes, polyetherimide support cushions.

Expand 2 Items
Caricamento...
Supporting frames and ring for reaction vessels

Supporting frames and ring for reaction vessels

Supplier: KGW

Fixed supporting frame, pipe Ø 27 mm, 1500 mm height, for: flat flanges DN 150

Expand 4 Items
Caricamento...

Flange Guards, SAFECAP PVC

Supplier: Brady

Controls liquids from light pressure, indoor pipes. Suitable for most industries.

Expand 1 Items
Caricamento...
Supports for round bottom flasks, SP Bel-Art

Supports for round bottom flasks, SP Bel-Art

Supplier: Bel-Art Products, a Part of SP

This PP round bottom flask support fits any size round-bottom flask up to 10 liters using stepped, concentric rings.

Expand 1 Items
Caricamento...
ROBU® Rubber Sleeves

ROBU® Rubber Sleeves

Supplier: ROBU GLASFILTER

ROBU® Rubber Sleeves for Crucibles provide secure sealing for filter crucibles and corresponding adapters. Made from high-quality rubber, they ensure a tight fit and prevent leaks during filtration processes, offering durability and reliability in laboratory applications.

Expand 4 Items
Caricamento...
Conical gaskets for filter flasks

Conical gaskets for filter flasks

Supplier: ROBU GLASFILTER

Conical gaskets, made of rubber, to place between filter funnel and filter flask.

Expand 11 Items
Caricamento...
Manicotti per crogioli per filtrazione

Manicotti per crogioli per filtrazione

Supplier: DEUTSCH NEUMANN

These sleeves for filter crucibles are made from red natural rubber.

Expand 4 Items
Caricamento...
Maniche per filtrazione sotto vuoto

Maniche per filtrazione sotto vuoto

Supplier: DEUTSCH NEUMANN

Gomma, autoclavabile.

Expand 18 Items
Caricamento...
Sleeves for vacuum filtration

Sleeves for vacuum filtration

Supplier: KARTELL

Set of 7 adapters, conical, made of black neoprene, sleeve supports for Büchner funnels and filter flasks.

Expand 1 Items
Caricamento...
Manicotti per filtrazione a vuoto

Manicotti per filtrazione a vuoto

Supplier: DEUTSCH NEUMANN

Gomma naturale

Expand 6 Items
Caricamento...
Conical sleeves for vacuum filtration, Sterilin®

Conical sleeves for vacuum filtration, Sterilin®

Supplier: STERILIN

Red natural rubber cones for use with filtering flasks.

Expand 1 Items
Caricamento...
Maniche per crogioli filtranti

Maniche per crogioli filtranti

Supplier: Lenz Laborglas GmbH & CO.KG

Rubber sleeves suitable for filter crucibles.

Expand 4 Items
Caricamento...
Sleeves for filter crucibles

Sleeves for filter crucibles

Supplier: Brand

Sleeves made of rubber (EPDM) suitable for filter crucibles.

Expand 2 Items
Caricamento...
Rubber conical gaskets Guko, DURAN®

Rubber conical gaskets Guko, DURAN®

Supplier: DWK Life Sciences

EPDM rubber.

Expand 9 Items
Caricamento...
Guarnizioni coniche per imbuti filtranti e matracci di filtrazione

Guarnizioni coniche per imbuti filtranti e matracci di filtrazione

Supplier: Brand

Conical gaskets to place between filter funnel and filter flask.

Expand 9 Items
Caricamento...
Sleeves for filter crucibles, DURAN®

Sleeves for filter crucibles, DURAN®

Supplier: DWK Life Sciences

These sleeves are made from EPDM (ethyene/propylene-diene-rubber).

Expand 4 Items
Caricamento...

Autosampler vial sleeve

Supplier: PerkinElmer

This open base clear glass support sleeve is used to offer microsampling capability in a standard 2 ml vial carousel or robotic autosampler.

Expand 1 Items
Caricamento...
Ordina per
Recommended for You