Supplier: Merck

I bioindicatori Sterikon® plus possono essere utilizzati per verificare il funzionamento delle autoclavi (15 minuti a 121°C). Possono essere utilizzati per valutare la sterilizzazione in autoclave di qualunque carico. Ad esempio, prodotti farmaceutici, in particolare prodotti in fiale, alimenti in scatola ecc.

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using steam sterilisation (autoclaves).

Supplier: VP Medical Packaging

Indicator di sterilità, Bowie-dick single use test pack (prime-pack)

Supplier: LIOFILCHEM

Biological indicators for validating sterilisation using steam sterilisation (autoclaves).

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using VHP in isolators.

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using steam sterilisation (autoclaves).

Supplier: MICRONOVA

Saturated crepe paper/synthetic poly isoprene adhesive in plastic core. It is a proven method of positively confirming a completed sterilisation cycle in both gravity discharge and vacuum autoclaves. Green indicator lines change to black when proper levels of steam pressure and temperature have been achieved. After use, the tape removes quickly and completely, leaving minimal residue or staining.

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using steam (autoclaves), VHP (isolators), dry heat and irradiation processes.

Supplier: 3M MEDICAL

Biological indicators provide the best assurance of sterility by challenging the steriliser with quantifiable, highly resistant spores. After sterilisation, the vial is 'crushed' to join the growth media with the processed spore strip. A colour change to yellow indicates surviving spores and a positive result. Biological indicators are used for load control monitoring which is the process by which a load is monitored and released based on the result of a biological indicator (BI) in a test pack.

Supplier: 3M MEDICAL

Rapid readout biological indicator for EO (ethylene oxide) sterilization.

Supplier: 3M MEDICAL

The 3M™ Comply™ Steam Chemical Indicator 1251 is a paper strip 1,5 cm wide by 20 cm long printed with a chemical indicator ink that turns from red to green when exposed to the steam sterilisation process.

Supplier: 3M MEDICAL

This steam chemical indicator offers a distinct off-white to dark brown/black color change when exposed to steam sterilization.

Supplier: 3M MEDICAL

With unique colour chemistry, the 3M™ Comply™ Disposable Bowie and Dick Type Autoclave Test Pack has been designed for single use in porous load sterilizers for daily Bowie and Dick tests.

Supplier: 3M MEDICAL

3M™ Attest™ Biological Monitoring Systems are true biological indicators, in self-contained indicator capsules. They enable checks on the biological reliability and performance of each steriliser without laboratory facilities and laboratory trained personnel.

Supplier: Brand

This self-adhesive crepe indicator tape turns from white to brown upon autoclaving.

Supplier: 3M MEDICAL

Integrating indicator for use in determining whether the process conditions necessary for sterilisation were met inside each pack. Can be used in all 118 to 138 °C (245 to 280 °F) steam sterilisation cycles.

Supplier: 3M MEDICAL

Four-hour, green cap, Rapid Readout Biological Indicator for EO Sterilization . Biological indicators and test packs that monitor the effectiveness of the EO sterilisation process and provide results within four hours.

Supplier: Texwipe

Indicator di sterilità, Labels, Cleanroom labels, autoclavable, Lunghezza: 50 mm, Larghezza: 50 mm

Supplier: 3M MEDICAL

An exposure monitor that securely seals packs, and provides a visual assurance that the package has been exposed to the steam sterilisation process.

Supplier: 3M MEDICAL

Twenty four minute Biological Indicator Challenge Pack for 132°C (270°F) 4 minute and 135°C (275°F) 3 minute Dynamic Air Removal Steam Sterilization. Each pack contains one 3M™ Attest™ Super Rapid Readout Biological Indicator 1492V.

Supplier: 3M MEDICAL

3M™ Attest™ Rapid Readout Biological Indicators 1295 for vaporised hydrogen peroxide (VH2O2) sterilisation provide faster results.

Supplier: 3M MEDICAL

This chemical indicator tape is designed for use as packaging tape and for the immediate identification of items exposed to dry heat processing.

Supplier: 3M MEDICAL

The Bowie and Dick test is carried out daily in an empty chamber after a warm up cycle and is designed to show the adequacy of steam penetration.

Supplier: 3M MEDICAL

Indicator tapes are Class 1 process indicators used for exposure monitoring. They provide assurance to the operator handling the processed items that the pack has been exposed to the sterilisation process without the need to open the pack or check load control records. Optional tape dispensers are available for easy dispensing of indicator tapes.

Supplier: 3M MEDICAL

The 3M Comply indicator tapes are an integral part of a coordinated sterilisation control system.

Supplier: 3M MEDICAL

3M™ Attest™ Super rapid readout biological indicators and challenge packs for steam, super rapid 1-hour results.

Supplier: 3M MEDICAL

The 3M™ Attest™ Vaporized Hydrogen Peroxide Tri-Metric Chemical Indicator 1348/1348E verifies that the stated values for the three critical parameters of exposure time, temperature, and amount of vaporized hydrogen peroxide have been achieved within a package or containment device (i.e. wrapped trays, rigid containers, sterilization pouches, and other types of packs) and/or at a specific location within the load or empty chamber.

Supplier: KARTELL

Nastro adesivo.

Supplier: KARTELL

Nastro adesivo.

Supplier: PRECISION DYNAMICS TIMEM

Nastro adesivo bianco crespo, per l'utilizzo nelle autoclavi standard