You searched for: Filtri per siringhe

Supplier: Avantor

Questi filtri per siringhe sono progettati specificatamente per applicazioni di preparazione dei campioni cromatografici e ottimizzati per fornire risultati più coerenti con meno estraibili.

Supplier: Cytiva (Formerly Pall Lab)

Ottimizzati per offrire i migliori risultati nelle analisi di specie ioniche. Certificati per estraibili di basso livello rilevati mediante conducibilità.

Supplier: Cytiva (Formerly Pall Lab)

Acrodisc™ syringe filters with Supor™ membrane deliver high flow rates and low protein binding.

Supplier: Cytiva (Formerly Pall Lab)

Adatto per soluzioni di dimetilsolfossido (DMSO). Sterilizzazione di terreni di coltura per la crioconservazione di cellule.

Supplier: Cytiva (Formerly Pall Lab)

Utili per prefiltrazione di campioni acquosi carichi di particolato, filtrazione di siero e test di dissoluzione.

Supplier: Cytiva (Formerly Pall Lab)

Filtro versatile per la filtrazione di campioni sia a base acquosa che a base di solventi. Eccellente compatibilità chimica con esteri, basi e alcoli.

Supplier: Cytiva (Formerly Pall Lab)

Useful for a wide range of applications, including aggressive and non aggressive solvent-based mobile phase.

Supplier: Cytiva (Formerly Pall Lab)

Rimozione di endotossine da acqua, tampone, zuccheri neutri e soluzioni biologiche. Preparazione di plasmidi per trasfezione.

Supplier: Cytiva (Formerly Pall Lab)

Acrodisc™ PSF high performance syringe filters can be used for general clarification or application specific uses like dissolution, HPLC, and IC. Engineered to work in most automated filter systems.

Supplier: Cytiva (Formerly Pall Lab)

Semplifica l'aumento di scala e riduce al minimo la rivalidazione; non è necessario cambiare i materiali della membrana durante la transizione al pilota o alla produzione. Alloggiamento in PP; quattro chimiche della membrana assicurano la compatibilità con un'ampia gamma di fluidi.

Supplier: Cytiva (Formerly Pall Lab)

Exceptional chemical and temperature compatibility. Ideal for filtration of gas and organic solvents. Prevent spurious peaks on chromatograms allowing accurate experimental results. HPLC certified for low level of UV-absorbing extractables.

Supplier: Sartorius

Filtri per siringhe con membrana in PTFE idrofobo con alloggiamento in MBS per rapida aerazione sterile e filtrazione di gas.

Supplier: Cytiva (Formerly Pall Lab)

Maximise throughput for hard to filter samples. Reduce clogging, use alone or in series with final membrane filter to increase flow rate and throughput.

Supplier: Sartorius

Minisart® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. With a pore size of 0,2 µm that can be used for sterile filtration and has a male luer lock outlet. Only available in the EU/EEA and registered countries

Supplier: Sartorius

Minisart® RC with hydrophilic regenerated cellulose (RC) is optimised for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. With a pore size of 0,2 µm that can be used for sample preparation and sterile filtration.

Supplier: Cytiva (Formerly Pall Lab)

The Acrodisc® WBC premium syringe filter is ideal for use in the capture and recovery of leukocytes and the separation of red blood cells. Acrodisc® WBC provides a simple and efficient method to isolate blood cells used in a variety of research applications including: Antigen specificity and modulation studies, immune receptor analysis, receptor protein studies, genotyping, gene expression, cell therapy.

Supplier: Sartorius

Minisart® NY with hydrophilic polyamide (nylon) is optimised for aqueous liquids and solvents with a pH of 3 to 14. Type 17845 with a pore size of 0,2 µm can be used for sample preparation and sterile filtration. It has a male Luer slip outlet and version ACK is individually packed and sterilised by ethylene oxide (EO).

Supplier: Whatman products (Cytiva)

Whatman ReZist range of syringe filters has been specifically designed to be resistant to organic solvents.

Supplier: Sartorius

Elimination of particles from samples prior to HPLC or other chromatographic analysis is essential in order to maintain the integrity of the chromatography column and to maximise its operating life time. Minisart® syringe filters optimised for sample preparation consist of a polypropylene (PP) housing and membrane components featuring maximum chemical compatibility and minimum extractables to ensure excellent results. Due to the typical range of volumes from less than 1 ml to 100 ml these filters are available in three different diameters with an effective filtration area of 0,12, 1,7 and 4,8 cm².

Supplier: Whatman products (Cytiva)

These syringe filters, with pigment-free PP housing, are ideal for use with samples that require inorganic ion analysis, as levels of ion extractables are minimised.

Supplier: Whatman products (Cytiva)

SPARTAN syringe filters with regenerated cellulose (RC) membrane provide reproducible filtration of organic and aqueous solutions for high performance and ultra-high performance liquid chromatography (HPLC and UHPLC) sample preparation.

Supplier: Corning

I filtri per siringhe sono disponibili con vari tipi di membrane: polietersulfone (PES) per bassa capacità legante delle proteine e maggiore velocità di filtrazione; acetato di cellulosa esente da tensioattivi (SFCA), con o senza prefiltro, per una bassissima capacità legante delle proteine; PTFE per la resistenza chimica; cellulosa rigenerata (RC) – la scelta migliore per la compatibilità DMSO; e nylon (NY) idrofilico, esente da tensioattivi e a bassissima estraibilità.

Supplier: Cytiva (Formerly Pall Lab)

These XT Acrodisc® units with Mustang® Q membrane are designed for laboratory use and scale-down process development.

Supplier: VWR Collection

Typical applications are clarification, sterile filtration, sample preparation and sterile venting.

Supplier: Merck

HPLC certified filters for the filtration of organic and aqueous solutions in HPLC.

Supplier: Merck

HPLC certified filters for the filtration of organic and aqueous solutions in HPLC.

Supplier: Merck

These filters include multiple media: a graduated prefilter and a membrane filter for high throughput filtration of viscous or particle-laden solutions.

Supplier: Merck

Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of samples improves the quality and consistency of analytical results and decreases instrument downtime.

Supplier: Merck

A 50 mm diameter non-sterile syringe filter with a 2 µm pore size glass fiber membrane.

Supplier: Merck

Millex-HV Syringe Filter with PVDF Membrane bind far less protein than nylon, nitrocellulose membranes, or PTFE membranes. High flow rates and throughput, low levels of extractables and broad chemical compatibility.