Trappole per vuoto

Supplier: KIMA SAS DI CHIARIN RENZO

ESA 1 single use holder, PP

Supplier: VARIAN

Though highly stabilised, it is impossible to guarantee that no particles will dislodge from the column wall. When used in valve-switching applications, the use of a particle trap can prevent scarring of the rotors.

Supplier: VARIAN

This vacuum trap eliminates the possibility of drawing fluids into the vacuum pump that may be detrimental to it.

Supplier: witeg Labortechnik

Ideal for collecting evaporation vapor or hazardous vapor from vacuum line.

Supplier: EDWARDS HIGH VACUUM METTLER

Inlet Desiccant Trap IDT20K: Use when pumping limited quantities of water vapour at high pumpings speeds to a low vapour pressure.

Supplier: HUBER

The CT50 Single OLÉ cold trap means that evaporation tasks in the laboratory are now even easier and cheaper. It has been specially developed to offer highly efficient solvent recovery in laboratory conditions.

Supplier: NEUBERT VOLUME GLASSWAERE

This cooling traps are made from borosilicate glass 3.3, with sleeve on the lower part, two 10 mm glass poles and ground clamp made of PP.

Supplier: NEUBERT VOLUME GLASSWAERE

The cooling traps are made from borosilicate glass 3.3, with core at the bottom, two 10 mm glass poles and ground clamp made of PE.

Supplier: NEUBERT VOLUME GLASSWAERE

Cooling trap, 250 ml, celanex (red), with cap, side connections GL14 with cap and PE-olive

Supplier: SciLabware

Designed for the vacuum systems which prevents the vapours from the volatile materials from damaging pumps and easy to use.