Hai cercato: Forniture per cromatografia

Supplier: Trajan Scientific and Medical

Siringhe per autocampionatori. Per AOC14, AOC17 e AOC20

Supplier: S.C.A.T.

SCAT lab installations can be completely integrated into lab furniture and offer a gastight system for safe fluid management.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Trajan Scientific and Medical

Siringhe per autocampionatori per HP7673, 7683, 7693A e 6850ALS.

Supplier: Trajan Scientific and Medical

SilFlow™ microchannel device (MCD) options for three-port GC splitters, four-port GC splitters and a Deans' switch MCD, perfect for multi-dimensional analyses. SilFlow™ can be incorporated into the system without impacting the chromatography.

Supplier: Bohlender

HPLC sets for solvent supply containing b.safe caps GL 45 for four bottles, PFA-fittings for capillaries with Ext.Ø. 3,2 mm, blind fittings made of PFA to close unused connections as well as air valves with service life indicator.

Supplier: Trajan Scientific and Medical

SGE OptChem™ GC inlet liner provide optimal performance with advanced coating technologies in an easy to use format for GC and GCMS.

Supplier: Thermo Fisher Scientific

ESI-MS accessories are used to facilitate reproducible, low dispersion connections between μPAC HPLC columns and low-flow mass spectrometer ion sources.

Supplier: Thermo Fisher Scientific

Ferrule, transfer line, graphite/vespel

Supplier: Thermo Fisher Scientific

These liners provide enhanced inertness, leading to increased accuracy, sensitivity, and precision in your gas chromatography (GC) analysis.

Supplier: Thermo Fisher Scientific

Optimise the performance of Agilent™ GC systems with these specifically designed injection port liners for Agilent instruments.

Supplier: IDEX RHEODYNE

RheBuild® kits containing genuine Rheodyne® parts are available for most Rheodyne® products

Supplier: Thermo Fisher Scientific

This SilFlow 3-port device allows column switching in GC-MS without the need to vent.

Supplier: IDEX RHEODYNE

Stators are available in 316 stainless steel, PEEK and proprietary materials. Rheodyne® stator materials have been researched and selected for their physical and mechanical strengths. Stators only need replacing if the ports or sealing surfaces become damaged.

Supplier: Thermo Fisher Scientific

Solid Phase Micro Extraction (SPME) uses a thin-fused silica fiber coated with a sorbent which enables extraction of compounds of interest from liquid or gaseous samples through absorption or adsorption. The fiber is then moved to the injector and the compounds thermally desorbed. The SPME consumables come in two formats SPME fibers and SPME arrows.

Supplier: IDEX RHEODYNE

The Rapid Replacement Pod™ (removable liquid-end) design of the TitanHP™ and TitanHT™ platforms make it easy to replace valve's wear components. The entire Pod™ can be purchased separately and replaced as a unit with nearly no instrument downtime for repair. The Pods™ can then be rebuilt at a later time with genuine Rheodyne® RheBuild® kits.

Supplier: IDEX RHEODYNE

Rheodyne®, Sample loop, for model 9725, 9010, PR/EV750-100, PR/EV753-100, PEEK, 100 µl, Per tubo con Ø interno: 0,51 mm, per tubo con Ø esterno: 1,5 mm

Supplier: Thermo Fisher Scientific

LinerGOLD™ GC liners provide exceptional inertness, leading to increased accuracy and precision by preventing loss of sensitive compounds.

Supplier: PerkinElmer

Diamond™, Guard rings

Supplier: MACHEREY-NAGEL

Glass laboratory sprayer with rubber bulb

Supplier: CAMAG

This chromatogram immersion device is suitable for TLC and HPTLC plates up to 200×200 mm.

Supplier: PerkinElmer

These desorber tubes are offered with a variety of sorbent packing materials for many GC applications including indoor and outdoor air monitoring, analysis of flavors and fragrances and the analysis of outgassing from packaging, polymers, pharmaceuticals and semi conductor material.

Supplier: CHROMACOL

This wash kit with 25 vials and caps is suitable for equipping a lab with 4 or 5 instruments or one instrument for a longer period. The value of regularly replacing caps is not always clear so many labs do not routinely maintain the wash stations.

Supplier: MACHEREY-NAGEL

The Column Protection System guard column holder is used for the installation of NUCLEODUR®, NUCLEOSIL®, NUCLEOSHELL® or UNIVERSAL RP guard columns (EC system) at analytical HPLC columns with ¹/₁₆" fittings.

Supplier: PerkinElmer

Sample cup holder

Supplier: PerkinElmer

Masscal solution for atomic spectroscopy

Supplier: PerkinElmer

This is a replacement vial locator for PerkinElmer AutoSystem GC autosamplers.

Supplier: PerkinElmer

Sampling probe, 0,6 mm Ø int., Per: AS-90/90A/90 Plus/91/93 Plus autosamplers

Supplier: PerkinElmer

Needle Guide, Per: GC packed injectors