Rotori

Supplier: Beckman Coulter

Ti-15 Titanium zonal rotor and lid with standard core, designed for use with Beckman Coulter Class H and S ultracentrifuges and is used to separate lipoproteins, viruses, and particles of 100 S and above. This configuration of the Ti-15 rotor comes with a standard core and can generate centrifugal forces up to 102000×g while allowing for the introduction of sample solution from the center of the rotor only.

Supplier: Beckman Coulter

Empty rotor and windshield weight is 10,8 kg. Package includes: JLA-9.1000 rotor, lid with removable canisters, labware kit (bottle rack, spatula, bottle grip and wrench). Upgrade required for existing instruments prior to 1998.

Supplier: Thermo Scientific

Increase nucleic acid sample separation by using the Thermo Scientific™ 10×5 ml rotor with ClickSeal™ biocontainment lid.

Supplier: Thermo Scientific

For high-throughput blood processing needs, the Thermo Scientific™ HAEMAFlex™ 12 swinging bucket rotor provides 12× 500 ml capacity or upgrade your centrifuge capacity to 16× 500 ml blood bags with the Thermo Scientific™ HAEMAFlex™ 16 rotor and the same bucket selections.

Supplier: Beckman Coulter

The JA-25.15 fixed-angle rotor with Biosafety lid, aluminum is designed to hold up to twenty-four 15 ml tubes in two concentric rows at a 25° angle. Used in Beckman Coulter Avanti J (except Avanti J-E) and J2 series centrifuges, the JA-25.15 rotor develops centrifugal forces that are especially efficient in pelleting subcellular particles, bacteria, algae, and chloroplasts, or in short-column banding of viruses and subcellular particles.

Supplier: Beckman Coulter

Unshielded, four-place rotor with aluminium rotor yoke and removable aluminium swinging buckets. Buckets are interchangeable with microplate carriers for spinning microtitre plates and minitube racks. Holds up to four litres, four blood bags or four microtitre plate carriers. Accepts all multi-disc adapters except 339119. Note: requires tie-down kit (367045) for use with Avanti J-26 XP Series centrifuges.

Supplier: Beckman Coulter

JS-24.15 Swinging-bucket rotor, aluminum, titanium buckets.

Supplier: Beckman Coulter

The Aluminium JS-7.5 swinging bucket rotor, rated for 7500 rpm (min⁻¹), is designed to pellet cells and cell debris at moderate g-forces using round, conical, or flat-bottomed tubes or bottles in buckets or multi-tube carriers. Designed for use in Beckman Coulter J-series, J2 and J6 centrifuges.

Supplier: Beckman Coulter

Rotor core, noryl. For use in Ultracentrifuge rotors: Ti-15 (BECM969312, BECM969313, BECM369622), This rotor must be ordered according to the instrument in which they will be used or required a variety of additional items. BECM815742, O-ring, top of Rotor core, BECM011167, O-ring, for seal fitting, BECK812715, O-ring, bottom of Rotor core BECM332682, Cone BECM011519, O-ring, interior of Rotor core, BECM332691, Seal fitting BECM012780, O-ring, visible, of cap.

Supplier: Thermo Scientific

Kihajtható rotor 4×100 ml, 4000 perc¹, 2585×g (vödrökkel és adapterekkel kiegészítve), Per: Primo / primo R

Supplier: Thermo Fisher Scientific

Swinging bucket rotor, 8×1000 ml, 4600 min^-1, 7117 ×g, incl. round buckets and 1000 ml bottles, Per: Sorvall™ BIOS 16

Supplier: Thermo Fisher Scientific

Swinging bucket rotor H-6000A, for 6×1000 ml tubes (98×175 mm), 5000 min^-1, 7277 ×g, including six buckets, Per: RC3 series

Supplier: Beckman Coulter

The JA-12 fixed angle rotor with dual-locking biosafety lid, rated for 12000 rpm (min⁻¹), is designed to hold up to twelve 50 ml tubes at a 35° angle. Used in Beckman Coulter J2 and Avanti® J series centrifuges, the JA-12 rotor develops centrifugal forces that can efficiently pellet cells, bacteria, and food products; separate proteins, viruses, and sub-cellular fractions, and do phase separation and binding studies. Major applications: Pelleting cells, bacteria, or subcellular fractions, phase separations, binding studies. For use in Avanti J series and J2 series centrifuges.

Supplier: Beckman Coulter

Windshielded, six-place rotor with aluminium rotor yoke and removable aluminium swinging buckets. Buckets are interchangeable with microplate carriers (358682) for spinning microtitre plates and minitube racks. Holds up to six litres, six blood bags, or six microtitre plate carriers. Accepts all multi-disc adapters. A kit is available to convert this rotor to a JS-4.2SM (356501)

Supplier: Beckman Coulter

Major applications: Rapid pelleting of nucleic acid precipitates in 1,5 ml tubes.

Supplier: Beckman Coulter

The A-95 Rotor is an aluminium anodised black fixed angle rotor (30 angle) for use in Beckman Coulter airfuge air-driven micro-ultracentrifuges.