Rotori

Supplier: Beckman Coulter

The JA-25.15 fixed-angle rotor with Biosafety lid, aluminum is designed to hold up to twenty-four 15 ml tubes in two concentric rows at a 25° angle. Used in Beckman Coulter Avanti J (except Avanti J-E) and J2 series centrifuges, the JA-25.15 rotor develops centrifugal forces that are especially efficient in pelleting subcellular particles, bacteria, algae, and chloroplasts, or in short-column banding of viruses and subcellular particles.

Supplier: Beckman Coulter

Rotor core, noryl. For use in Ultracentrifuge rotors: Ti-15 (BECM969312, BECM969313, BECM369622), This rotor must be ordered according to the instrument in which they will be used or required a variety of additional items. BECM815742, O-ring, top of Rotor core, BECM011167, O-ring, for seal fitting, BECK812715, O-ring, bottom of Rotor core BECM332682, Cone BECM011519, O-ring, interior of Rotor core, BECM332691, Seal fitting BECM012780, O-ring, visible, of cap.

Supplier: Beckman Coulter

The Aluminium JS-7.5 swinging bucket rotor, rated for 7500 rpm (min⁻¹), is designed to pellet cells and cell debris at moderate g-forces using round, conical, or flat-bottomed tubes or bottles in buckets or multi-tube carriers. Designed for use in Beckman Coulter J-series, J2 and J6 centrifuges.

Supplier: Thermo Scientific

Rotore oscillante per microlitri 12×1,5/2,0 ml, 13 000 min⁻¹, 16 000×g, Per: Primo / primo R

Supplier: Beckman Coulter

The SW 32.1 Ti Swinging-bucket rotor, compatible with Beckman coulter class H, R, and S preparative ultracentrifugesis, is designed to centrifuge up to six tubes with a rating of up to 32000 rpm (min⁻¹), max g-force of 187000×g, and a nominal rotor capacity of 102 ml.

Supplier: Beckman Coulter

The Type 19 is a fixed angle rotor with a tube angle of 25 ° from the axis of rotation. The rotor can hold up to six 250 ml bottles for centrifugation and is used in Beckman Coulter class H, R and S ultracentrifuges.

Supplier: Beckman Coulter

MlN-80 rotor package, near-vertical tube (9 angle), titanium.

Supplier: Beckman Coulter

MlS-50 rotor package, swinging-bucket rotor, aluminum.

Supplier: Beckman Coulter

Ti-15 Titanium zonal rotor and lid with standard core, designed for use with Beckman Coulter Class H and S ultracentrifuges and is used to separate lipoproteins, viruses, and particles of 100 S and above. This configuration of the Ti-15 rotor comes with a standard core and can generate centrifugal forces up to 102000×g while allowing for the introduction of sample solution from the center of the rotor only.

Supplier: Beckman Coulter

JS-24.15 Swinging-bucket rotor, aluminum, titanium buckets.

Supplier: Beckman Coulter

Unshielded, four-place rotor with aluminium rotor yoke and removable aluminium swinging buckets. Buckets are interchangeable with microplate carriers for spinning microtitre plates and minitube racks. Holds up to four litres, four blood bags or four microtitre plate carriers. Accepts all multi-disc adapters except 339119. Note: requires tie-down kit (367045) for use with Avanti J-26 XP Series centrifuges.

Supplier: Beckman Coulter

The JA-30.50 Ti fixed angle rotor is designed to hold up to eight 50 ml tubes at a 34° angle. Used in Beckman Coulter Avanti J and J2 series centrifuges, the JA-30.50 Ti rotor develops centrifugal forces that can efficiently pellet cells from large volumes or cell particles from tissue homogenates. Short column methods (partially filled tubes) may also be used to purify large quantities of virus in a cushion gradient.

Supplier: Beckman Coulter

The JA-14.50 aluminum fixed-angle rotor is designed to hold up to sixteen 50 ml conical tubes at a 35° angle. Used in Beckman Coulter Avanti J series centrifuges, the JA-14.50 rotor develops centrifugal forces that can efficiently pellet cells, bacteria, and food products; separate proteins, viruses, and subcellular fractions, and do phase separation and binding studies.

Supplier: Beckman Coulter

JS-5.3 Swinging-Bucket rotor package, anodized aluminum. Four-place rotor with anodized aluminum buckets designed for use with adapters to accommodate a wide range of tubes and bottles. Includes rotor, buckets, tie-down knob, and microplate carrier kit (BECM368914).

Supplier: Beckman Coulter

Major applications: Pelleting of subcellular fractions; proteins; RNA.

Supplier: Beckman Coulter

Major applications: Separation of subcellular particles (pelleting, rate-zonal gradient), viruses (pelleting, rate-zonal gradient), protein purification/isolation (pelleting, rate-zonal gradient), DNA (pelleting, CsCl isopycnic), RNA (CsCl pelleting, density gradient), lipoproteins (differential flotation or gradient).