Hai cercato: Elettrodi

Supplier: Lovibond

SD30 EC With its waterproof housing, the pocket tester is ideal for regular checks in industrial plants or swimming pools.

Supplier: Testo

Elettrodo, pH, pH: 0 - 14, 0...60 °C, Elettrolita: Gel, Ø×L: 11×35 mm, Per: Semi-solid substances

Supplier: Cole Parmer

Keep your homogeniser up and running.

Supplier: Testo

Robust and dirt-insensitive pH penetration electrode without temperature sensor.

Supplier: CONSORT

Electrode, ORP, Elettrodi di platino ORP (redox), 0...±2000 mV, Giunzione singola, ricaricabile, 0...+100 °C, Vetro, Ø×L: 12×110 mm, S7

Supplier: HORIBA

Elettrodo, pH

Supplier: WTW ONLINE

The SensoLyt® measuring chains with arming are easy to install and boast flexible measuring and application areas. Eletrodes without arming can be connected directly to a pH monitor of the EcoLine® or QuadroLine® series. Depending on the application, they can be installed into a flow vessel.

Supplier: WTW ONLINE

With the NitraLyt® Plus 700 IQ, nitrate can be determined directly in the medium. This makes measured values available in a timely manner and they can easily be used for regulation purposes.

Supplier: Hanna

These pH electrodes are suitable for measuring the pH value in different types of food.

Supplier: HORIBA

Elettrodo, altro, Sensore di torbidità 7801, per misuratori U-53/U-53G

Supplier: METROHM

Surfactant electrodes for two-phase titration.

Supplier: Cole-Parmer

A variety of pH electrodes for your Jewnay meters.

Supplier: Endress+Hauser

Digital all-round ORP sensor with low maintenance requirements and long service life.

Supplier: Cole-Parmer

Elettrodo, multiparametro

Supplier: CONSORT

These combination electrodes have an epoxy body.

Supplier: Endress+Hauser

Compact panel transmitter for a pH/ORP, conductivity or dissolved oxygen measuring point.

Supplier: Mettler - Toledo

Elettrodo, pH, EG11-BNC, pH: 0 - 14, 0...+60 °C, Vetro, Diafr.: Ceramic, Elettrolita: 3 mol/l KCl sat, BNC, fix cable, Per: Acid/base titrations in juice, milk and wine

Supplier: WTW ONLINE

In-situ combination sensor for direct measurements of ammonium and nitrate using only one sensor. Designed for the installation of a measuring electrode, a reference electrode and a compensation electrode.

Supplier: Cole-Parmer

Electrode, redox, Redox electrode, 0 - 1000 mV, Redox electrode, platinum, 0...+80 °C, Vetro, Ø×L: 12×120 mm, BNC, 1 m cable

Supplier: WTW ONLINE

This system – consisting of a robust, digital armature with ammonium replacement electrode and ammonium reference electrode – allows ammonium measurement directly in the medium, without sample preparation. The system is designed for connection to the IQ SENSOR NET multiparameter measuring system.

Supplier: CONSORT

Elettrodo, pH, Giunzione singola, ricaricabile, pH: 0 - 14, 0...+100 °C, Vetro, Diafr.: Single junction, Elettrolita: Refillable, Ø×L: 8×250 mm, S7, Per: Tall form laboratory flasks, micro volumes

Supplier: Endress+Hauser

Compact panel device for all industries.

Supplier: Endress+Hauser

Compact panel device for all industries.

Supplier: CONSORT

Elettrodo, pH, SP10T (+ ATC/temperature (Pt1000)), single junction, sealed, pH: 0 - 14, 0...+80 °C, Epoxy, Ø×L: 12×110 mm, BNC, cavo di 1 m, 2 spine a banana per ATC incorporato (Pt1000), Per: Uso generico

Supplier: Mettler - Toledo

Pressurized gel-electrolyte electrodes for pH/ORP measurements in chemical processes.

Supplier: WTW ONLINE

The special design of the process line electrodes makes them close to optimal in their accuracy, stability, speed and longevity to liquid electrolyte electrodes. For the use in pipelines, they can be installed into the replacement fitting CHEMtrac 830 M.

Supplier: Cole-Parmer

These electrodes with epoxy body are ideal for the measurement of food extracts.

Supplier: Cole-Parmer

Elettrodo, pH, Combination pH electrode, bulb type, pH: 0 - 11, 0...+50 °C, Vetro, Diafr.: Annular ceramic, Elettrolita: 3M KCl (refillable), Ø×L: 12×120 mm, BNC, 1 m cable, Per: Low ionic strength solutions

Supplier: Cole-Parmer

Elettrodo, pH

Supplier: Lovibond

Combined pH/temperature electrode with temperature sensor NTC 30 kOhm and BNC connection.