Hai cercato: Raccordi e connettori

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, 1583 Adapter, 10-32 coned, female to 1/4-28 flat-bottom, female, 1 mm thru-hole, 0,60 µl swept volume, Acciaio inossidabile

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: VICI JOUR RESEARCH

Connectors for low pressure applications are machined from PEEK.

Supplier: SEMADENI

Connectors for easy installation on any plastic containers by means of counter screw.

Supplier: SEMADENI

Made of PP.

Supplier: Bohlender

For connection of sensors with male thread PG to BOLA reactor lids.

Supplier: VICI JOUR RESEARCH

Peek one-piece hex-head fittings, with their integrated ferrule, are easy to use with the valve-tool and the colour-it colour-coded finger-tight adapters. PEEK one-piece hex-head fittings are available in short and long versions.

Supplier: UPCHURCH SCIENTIFIC

These fittings eliminate loosening due to tubing twist.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-309, plug for 1/4-28 flat bottom ports, standard knurl, Delrin®*, nero

Supplier: KLS Martin Group

Couplings, tubing, Faucet coupling for water jet pump 1/2", Filettatura: 12,7 mm

Supplier: VICI JOUR RESEARCH

VICI Stainless Steel Unions are made for joining two pieces of 1/16" OD tubing, or an 1/8" tube. They are precision machined with a focus on the concentricity of the bore as well as on the finish of the surfaces to give an absolute leak-free connection. These Unions have internal threads, which we recommend for most applications. Internal threads make stronger connections and internal fitting details provide the lowest dead volume for high performance instrumentation.

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: VICI JOUR RESEARCH

These stainless steel 316 tees and crosses are ideal for joining solvent lines.

Supplier: TOSOH Bioscience

Connection pipe set, J type

Supplier: VICI JOUR RESEARCH

These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.

Supplier: VICI JOUR RESEARCH

These fittings are designed for 360 µm tubing (metal, fused silica, PEEK or fused silica).

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-112, MicroFerrule, PEEK natural, 5/16-24 coned port, for 1/32" OD tubing, 5000 psi, PEEK

Supplier: SEMADENI

PP, gray.

Supplier: SEMADENI

Connectors, Y- shaped, made of PP, natural color.

Supplier: ELDON JAMES

These tees are made of Natural Kynar® material, which has a temperature range of −62 to +107 °C and a pressure of 260 psi at 21 °C

Supplier: DIONEX

Dionex™, Fitting ferrule, double cone, 10-32

Supplier: Roth Carl

Tubing connectors made of PBT with EPDM flat seal. Ideal for fast, safe and leakproof connections of tubing to glass hose connectors and glass threads.