You searched for: Raccordi e connettori
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Adapter Fittings, Compression to Male Threaded, Elbows
Supplier: Avantor Fluid Handling
Maintain a permanent connection with these adapters.
Expand 1 Items
MPX series ¹/₂" flow, quick disconnect coupling for bio and pharma
Supplier: CPC COLDER
These ¹/₂" flow quick disconnect couplings are manufactured specifically for the bio and pharma markets.
Expand 8 Items
Venture Tech Sanitary Clamp Tee Fittings, PFA
Supplier: Avantor Fluid Handling
Ideal for extremely corrosive materials—PFA will not rouge or pit.
Expand 2 Items
BarbLock™ Ultra-Secure Tubing Retainers
Supplier: Saint Gobain Life Sciences
When it comes to retaining flexible tubing and hose onto barbed fittings, BarbLock™ retainers have become the standard in many industries because they solve inherent leak path problems in sensitive and demanding applications. The retainer uses no adhesives or solvents, is ideal for systems transferring delicate liquids or gases.
Expand 6 Items
Fittings preparative, b.safe
Supplier: Bohlender
Fittings made of PTFE to fix tubing in the tubing connectors (thread NPT ¹/₈") of b.safe caps. The conical seal cone clamps the tubing and tightens at the connector. Packing unit: 1 piece.
Expand 4 Items
Reducing screw thread adaptor couplings, BOLA
Supplier: Bohlender
Connector, reducing screw thread coupling, made of PTFE. Two screw caps made of PPS with GL thread and a PTFE/FPM gasket. The product is only exposed to PTFE.
Expand 7 Items
Reducing tubing connectors, b.safe
Supplier: Bohlender
Straight fitting made of PP, with two hose connectors of elastic tubing with different inner diameters.
Expand 2 Items
GC capillary column connectors, SilTite™ μ-unions
Supplier: Trajan Scientific and Medical
Ferrules for 0,1 to 0,25 mm ID columns have 0,4 mm holes. Ferrules for 0,32 mm ID columns have 0,5 mm holes. Ferrules for 0,53 mm ID columns have 0,8 mm holes.
Expand 15 Items
Tubing connectors, with nut
Supplier: Bohlender
These connectors are specially designed for a higher flow rate. Connectors made of PP, with elastic sealing lip, FPM o-ring and nut made of PBTP.
Expand 5 Items
PTFE GC Ferrules
Supplier: Trajan Scientific and Medical
These GC ferrules are made from 100% PTFE. They are soft, completely inert, and have very low friction.
Expand 21 Items
CPC® High-Flow Non-Spill Quick-Disconnect Fittings, Bodies and Inserts
Supplier: Avantor Fluid Handling
Virtually eliminate any loss of product with this leak-free design.
Expand 6 Items
CPC® Non-Spill Quick-Disconnect Fittings, Bodies and Inserts
Supplier: Avantor Fluid Handling
Stop leaks in your line—spillage as low as 0,10 ml.
Expand 14 Items
CPC® Metal Quick-Disconnect Fittings, UNF (F) Threaded Inserts
Supplier: Avantor Fluid Handling
Convenience of a quick-disconnect in pressure and vacuum applications.
Expand 1 Items
CPC® Metal Quick-Disconnect Fittings, Compression Inserts
Supplier: Avantor Fluid Handling
Convenience of a quick-disconnect in pressure and vacuum applications.
Expand 9 Items
Vent Assembly, 2 Port, Straight
Supplier: DISTEK
Vent Assembly, 2 Port, Straight
Expand 1 Items
Grounding and adapters, SymLine®
Supplier: S.C.A.T.
Dovetail the SymLine® system to suit specific requirements. This product selection includes several useful ancillaries.
Expand 18 Items
Tubing connectors, elbow-shaped, BOLA
Supplier: Bohlender
Elbow-shaped fitting, made of PTFE, with two connectors for elastic tubing.
Expand 4 Items
GL tube fittings, PTFE EX
Supplier: Bohlender
Connector for tubing, made of PTFE-EX, with two GL screw connections. To distribute liquids or gases. Can be used as a reducer to connect different tubes or hoses.
Expand 12 Items
CPC® Quick-Disconnect Fittings, Push-to-Connect Inserts
Supplier: Avantor Fluid Handling
No more struggling - just press thumb latch.
Expand 7 Items
John Guest acetal push-to-connect reducer swivel adapter
Supplier: Avantor Fluid Handling
No need to buy two fitting halves.
Expand 4 Items
Adapter Fittings, Female Threaded, Tee
Supplier: Avantor Fluid Handling
Maintain a permanent connection.
Expand 8 Items
Male Cam to Male NPT Threaded Adapters, Polypropylene
Supplier: Avantor Fluid Handling
Cam couplers provide quick disconnection from system.
Expand 1 Items
Female Cam to Hose Barb Couplers, Polypropylene
Supplier: Avantor Fluid Handling
Cam couplers provide quick disconnection from system.
Expand 1 Items
Elbow fitting, b.safe
Supplier: Bohlender
Screw cap for thread GL 25 made of PPS with male thread GL 25.
Expand 1 Items
Starter set, b.safe Multiport II
Supplier: Bohlender
One connection for collecting liquid waste from up to 2 HPLC systems that can be integrated directly in laboratory hoods or working tables. b.safe Waste Tubes lead liquid solvent waste directly into connected canisters.
Expand 1 Items
Multiple distributors with ground joint, BOLA
Supplier: Bohlender
Three GL-threaded necks for connection of hard-walled tubing and tubes made of glass, plastic, or metal by means of BOLA laboratory screw joints.
Expand 3 Items
PrimeLock® High-Purity PFA Fittings, NPT(M) Straight Adapters
Supplier: Avantor Fluid Handling
Ultra-clean and reliable fittings for highly critical and corrosive chemicals.
Expand 1 Items
Reducer Fittings, Compression, Straight
Supplier: Avantor Fluid Handling
Excellent choice to connect rigid tubing systems.