Hai cercato: Cartucce con filtro

Supplier: ZIEGRA EISMASCHINEN

High reliability and long service life water filter cartridge for ice machines.

Supplier: Merck

Cartuccia filtro, IPAK Meta® polishing cartridge

Supplier: Merck

Sistemi per acqua pura e ultrapura, Synergy Pack III (acqua di alimentazione DI)

Supplier: Merck

Filter cartridge, Blocco di purificazione DI-PAK, grande, per sistema Milli-DI™

Supplier: Avantor Fluid Handling

Ideal for ultrapure filtration applications.

Supplier: Avantor Fluid Handling

A collection to fit a wide range of critical applications.

Supplier: ENTEGRIS

These point-of-use filters meet small to mid-volume photochemical filtration needs for positive developer and DI water applications. Both Optimizer® DEV filters (for developer applications) and Optimizer® DI filters (for DI water applications) require no pre-wetting, so the filters function immediately after installation. The design also limits the handling of hazardous chemicals during the installation and promotes a healthier workplace. Do not use either filter with aromatic hydrocarbons.

Supplier: ENTEGRIS

Photochemical filter with superior contaminant retention and low hold-up volume performance in sub-10 to 180 nm technology nodes.

Supplier: ENTEGRIS

These filters are designed for small to mid volume POU photochemical and solvent filtration needs. They can be used for the hydrophobic filtration of photoresists, thinners and solvents.

Supplier: ENTEGRIS

These cartridge filters are designed with all fluoropolymer construction to consistently remove particles from a wide range of acids, bases and other process chemicals.

Supplier: ENTEGRIS

These filters can be used in solvent based photochemicals without the need for prewetting steps.

Supplier: ENTEGRIS

These disposable point of use filters are well suited for small to mid-volume process fluid filteration needs.

Supplier: ENTEGRIS

These filters are designed to consistantly remove particles from a whide range of acids, bases and other process materials. Ideal for medium to high flow applications, they deliver a low cost of ownership (COO) as a dry device or prewet product ready for quick installation. Prewet cartridges prevent alcohol-chemical interactions, avoid potential contamination sources and minimise process downtime.

Supplier: ENTEGRIS

These filters provide superior filtration for critical dilute, aqueous and low neutral pH cleaning applications at advanced technology nodes. The clean, dual capture membrane improves process performance and reduces on-wafer defects. In addition to sieving particle capture which is always active, the non sieving retention mechanisms are also active and strongest in conditions where pH is <3 and no surfactant is present.

Supplier: ENTEGRIS

The UPE membrane of these filters eliminates pre-wetting, which optimises the full use of the membrane and ensures maximum flow.

Supplier: ENTEGRIS

This cartridge filter with high flow and efficient particle removal, ensures rapid particle removal in one-pass and recirculating applications. It eliminates the trace levels of ions and improves the quality of ultrapure water.

Supplier: ILC DOVER

High efficiency particulate air filters are used to support operations where API powders are being processed and there is no gas/vapor threat.

Supplier: Sartorius

Cartuccia filtro, Tipo: Universal kit, arium® pro cartridge set for non treated drinking water

Supplier: Sartorius

Arium® mini scientific pack deionisation cartridge faetures top-down-flow technology which is optimised for the removal of both organic and inorganic constituents. The set was designed specifically to match the unit and delivers ultrapure water that exceeds the ASTM Type 1 quality standard.

Supplier: Sartorius

Cartuccia filtro, arium®, Ion exchange resin mix, refill pack for complete deionisation cartridges, arium® 615DI, in 25 l PE bag

Supplier: Sartorius

Sartofluor® GA filter cartridges, manufactured with permanently hydrophobic PTFE membranes, are specially designed for sterile venting and gas applications. Due to their permanent hydrophobicity, they offer the highest process security, even with high volume gas streams, extreme humidity and stringent in-line steam sterilisations.

Supplier: Sartorius

This is the deionization cartridge set with top-down technology which is optimized for the removal of both organic and inorganic constituents. It is specifically designed to match the unit and delivers ultrapure water which exceeds the ASTM Type 1 quality standard.

Supplier: Sartorius

Cartuccia filtro, arium®, Deionisation cartridge with installation kit, capacity range up to 1400 l @ 20 ºdH, flow rate 600 l/h

Supplier: MACHEREY-NAGEL

These filtration cartridges are used for sample clarification under vacuum (e.g., using the CHROMABOND® vacuum manifold or SPE automation systems) or by gravity. By using CHROMAFIL® filtration cartridges with their specific membranes unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation.

Supplier: Sartorius

Sartovent® is an ideal filter for sterile aeration of tanks. It is entirely made of PP and does not alter the organoleptic properties of the product.

Supplier: Sartorius

These filters are designed for biopharmaceutical industry from particle removal to bioburden reduction. They offer a defined retention performance by size exclusion.

Supplier: Sartorius

Sartofluor® two filter systems are ideally suited for bioburden reduction and particle removal of highly viscous and difficult to filter pharmaceutical solutions. Due to its hydrophilic PES membrane, the filter offers outstanding total throughputs and flow rate performances. Thus ensuring highest process efficiency, minimised filtration costs and short filtration cycle times.

Supplier: Sartorius

Sartoclean® filter cartridges are cellulose acetate (CA) membrane based prefilters. These filters are optimised for the protection of downstream equipment and Sartobran® CA final filters.

Supplier: Sartorius

Cartuccia filtro, Sartobran®, PP, Materiale membrana: Celluloseacetaat, Tipo: 25 (S-adapter top, locking bayonet adapter with 226 double O-ring bottom), Dimensioni pori: 0,2 µm, Superficie di filtrazione: 6000 cm²

Supplier: Sartorius

Sartoguard® GF filter elements consist of glass fiber layers and PES membranes. They combine the defined retention performance for particles and microorganisms of membrane filters with the high total throughput capacity in the depth of the fibrous material. They are ideally suited for effective retention of particles, colloids and lipids which block more expensive sterilising grade or Mycoplasma retentive membrane filters quickly.