Hai cercato: Filtri per siringhe

Supplier: Avantor

Questi filtri per siringhe sono progettati specificatamente per applicazioni di preparazione dei campioni cromatografici e ottimizzati per fornire risultati più coerenti con meno estraibili.

Supplier: Cytiva (Formerly Pall Lab)

The Acrodisc® WBC premium syringe filter is ideal for use in the capture and recovery of leukocytes and the separation of red blood cells. Acrodisc® WBC provides a simple and efficient method to isolate blood cells used in a variety of research applications including: Antigen specificity and modulation studies, immune receptor analysis, receptor protein studies, genotyping, gene expression, cell therapy.

Supplier: Sartorius

Minisart® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. With a pore size of 0,2 µm that can be used for sterile filtration and has a male luer lock outlet. Only available in the EU/EEA and registered countries

Supplier: Cytiva (Formerly Pall Lab)

Acrodisc™ syringe filters with Supor™ membrane deliver high flow rates and low protein binding.

Supplier: Cytiva (Formerly Pall Lab)

Ottimizzati per offrire i migliori risultati nelle analisi di specie ioniche. Certificati per estraibili di basso livello rilevati mediante conducibilità.

Supplier: Sartorius

Filtri per siringhe con membrana in PTFE idrofobo con alloggiamento in MBS per rapida aerazione sterile e filtrazione di gas.

Supplier: Cytiva (Formerly Pall Lab)

Acrodisc™ PSF high performance syringe filters can be used for general clarification or application specific uses like dissolution, HPLC, and IC. Engineered to work in most automated filter systems.

Supplier: Cytiva (Formerly Pall Lab)

Semplifica l'aumento di scala e riduce al minimo la rivalidazione; non è necessario cambiare i materiali della membrana durante la transizione al pilota o alla produzione. Alloggiamento in PP; quattro chimiche della membrana assicurano la compatibilità con un'ampia gamma di fluidi.

Supplier: Cytiva (Formerly Pall Lab)

Adatto per soluzioni di dimetilsolfossido (DMSO). Sterilizzazione di terreni di coltura per la crioconservazione di cellule.

Supplier: Cytiva (Formerly Pall Lab)

Rimozione di endotossine da acqua, tampone, zuccheri neutri e soluzioni biologiche. Preparazione di plasmidi per trasfezione.

Supplier: VWR Collection

Typical applications are clarification, sterile filtration, sample preparation and sterile venting.

Supplier: Cytiva (Formerly Pall Lab)

Utili per prefiltrazione di campioni acquosi carichi di particolato, filtrazione di siero e test di dissoluzione.

Supplier: Merck

HPLC certified filters for the filtration of organic and aqueous solutions in HPLC.

Supplier: Merck

HPLC certified filters for the filtration of organic and aqueous solutions in HPLC.

Supplier: Merck

Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of samples improves the quality and consistency of analytical results and decreases instrument downtime.

Supplier: Merck

These filters include multiple media: a graduated prefilter and a membrane filter for high throughput filtration of viscous or particle-laden solutions.

Supplier: Merck

Millex-HV Syringe Filter with PVDF Membrane bind far less protein than nylon, nitrocellulose membranes, or PTFE membranes. High flow rates and throughput, low levels of extractables and broad chemical compatibility.

Supplier: Merck

A 50 mm diameter non-sterile syringe filter with a 2 µm pore size glass fiber membrane.

Supplier: Cytiva (Formerly Pall Lab)

Exceptional chemical and temperature compatibility. Ideal for filtration of gas and organic solvents. Prevent spurious peaks on chromatograms allowing accurate experimental results. HPLC certified for low level of UV-absorbing extractables.

Supplier: Cytiva (Formerly Pall Lab)

Useful for a wide range of applications, including aggressive and non aggressive solvent-based mobile phase.

Supplier: Merck

Millex® Syringe filters are HPLC-certified for low levels of UV-absorbing extractables.

Supplier: Merck

Filters for sterilising or clarifying biological solutions. The larger filtration area increases flow rate and throughput. It also makes it easier to filter solutions because it reduces the pressure required to empty the syringe.

Supplier: Merck

The Hydromillex syringe filter is used downstream in a Technecium Generator to prevent particles of radioactive technecium from getting through to the collection vial where the liquid is collected.

Supplier: Sartorius

Minisart® RC with hydrophilic regenerated cellulose (RC) is optimised for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. With a pore size of 0,2 µm that can be used for sample preparation and sterile filtration.

Supplier: Sartorius

Minisart® NY with hydrophilic polyamide (nylon) is optimised for aqueous liquids and solvents with a pH of 3 to 14. Type 17845 with a pore size of 0,2 µm can be used for sample preparation and sterile filtration. It has a male Luer slip outlet and version ACK is individually packed and sterilised by ethylene oxide (EO).

Supplier: Merck

Filters for sterilising or clarifying biological solutions. The larger filtration area increases flow rate and throughput. It also makes it easier to filter solutions because it reduces the pressure required to empty the syringe.

Supplier: Merck

Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of samples improves the quality and consistency of analytical results and decreases instrument downtime.

Supplier: Merck

Syringe filters with hydrophobic PVDF membrane. Used in vacuum line protection, transducer protection and gas filtration. Available as either 25 mm or pump-driven Millex®-FG₅₀ 50 mm diameter filters.

Supplier: Merck

Vented Millex®-GS filter units are syringe filters for sterilisation of low volume aqueous solutions where venting is desired.

Supplier: Sartorius

Membrane adsorber units with ion exchange membranes (stabilised reinforced cellulose) are ideal for capturing of large proteins and viruses as no size exclusion effects can be observed.