Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Merck

These PTFE white hydrophilic membrane compatible with all commonly used HPLC solvents. The membrane undergoes a special treatment process to remove any residual extractables, to provide clearer analysis results. They are widely used for HPLC mobile phase filtration, clarifying acids, bases and dilute protein solutions and isolation of RNA.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Cytiva (Formerly Pall Lab)

Mixed cellulose ester, WME range, circles, gridded. Whatman mixed cellulose ester membranes are composed of cellulose acetate and cellulose nitrate. These membranes are characterized by a smoother and more uniform surface than pure nitrocellulose filters.

Supplier: Merck

Our Fluoropore® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency. (Please note that catalogue numbers containing 'FHUP' are unlaminated, or produced without a backing.) Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions.

Supplier: Whatman products (Cytiva)

Cellulose nitrate membranes, circles, plain. Recommended for the majority of routine applications, this membrane is manufactured under strictly controlled conditions.

Supplier: Whatman products (Cytiva)

Anopore inorganic membranes (Anodisc), circles, with support ring.

Supplier: Whatman products (Cytiva)

Cytiva's Whatman cellulose acetate membrane filters have very low protein binding, which minimizes sample loss when filtering protein-based aqueous samples.

Supplier: Whatman products (Cytiva)

Whatman PTFE membrane filters from Cytiva business are chemically stable and inert, making them suitable for use with aggressive organic solvents, strong acids, and alkalis.

Supplier: Whatman products (Cytiva)

Whatman polyamide membranes are made from pure polyamide making them the universal filter for clarification and sterile filtration.

Supplier: Whatman products (Cytiva)

Whatman PTFE membranes from Cytiva are strong hydrophobic membrane filters resistant to the corrosive solvents and aggressive media used in gas sterilization and liquid clarification.

Supplier: Whatman products (Cytiva)

Cytiva's Whatman Cyclopore polycarbonate membranes are true pore size microporous membranes featuring the sharp cut-off and reproducible microfiltration characteristics of track-etched membranes.

Supplier: Whatman products (Cytiva)

These mixed cellulose ester membrane filters are designed for asbestos sampling using the membrane filter method for phase contrast microscopy. Asbestos sampling isolates these fibres from circulating air to determine concentrations.

Supplier: Whatman products (Cytiva)

These hydrophilic regenerated cellulose membrane filters are microporous cellulose acetate filters made without wetting agents. RC60 offers low extractables and wide compatibility in both organic and aqueous media.

Supplier: Whatman products (Cytiva)

Whatman Anopore inorganic membranes, supplied as Anodisc membrane filters, are an aluminum oxide membrane with a honeycomb pore structure that facilitates highly precise filtration. Their transparency and surface retention enable efficient light or electron microscopy.

Supplier: Whatman products (Cytiva)

Mixed cellulose ester, WME range, circles, gridded. Whatman mixed cellulose ester membranes are composed of cellulose acetate and cellulose nitrate. These membranes are characterized by a smoother and more uniform surface than pure nitrocellulose filters.

Supplier: Whatman products (Cytiva)

High quality nylon membranes are suitable for filtering aqueous solutions and most organic solvents. They are suitable for use with a wide range of biological preparations and can be used where other membranes are unsuitable or difficult to use.

Supplier: Whatman products (Cytiva)

Mixed cellulose ester, WME range, circles. Whatman mixed cellulose ester membranes are composed of cellulose acetate and cellulose nitrate. These membranes are characterized by a smoother and more uniform surface than pure nitrocellulose filters.

Supplier: Whatman products (Cytiva)

Cytiva's Whatman PM2.5 PTFE membrane filters are designed for PM 2.5 ambient air monitoring. These high-purity, thin filters are sequentially numbered and come with chemically resistant polypropylene support rings.

Supplier: Whatman products (Cytiva)

Mixed cellulose ester, WME range, circles, gridded. Whatman mixed cellulose ester membranes are composed of cellulose acetate and cellulose nitrate. These membranes are characterized by a smoother and more uniform surface than pure nitrocellulose filters.

Supplier: Whatman products (Cytiva)

These are unbacked nitrocellulose membranes for use in a lateral flow assay.

Supplier: Merck Millipore (Calbiochem‎)

Miracloth is an autoclavable, quick filtration material for gelatinous homogenates that is composed of rayon-polyester with an acrylic binder. Ideal for filtration of cleared neutralised lysates during medium- and large-scale plasmid purification to prevent contamination with loosely adherent pellet material and is useful for protoplast isolation.

Supplier: Whatman products (Cytiva)

Recommended for microbiological culturing and sample preparation, these cellulose nitrate membrane filters offer very narrow pore size distribution and low levels of extractables.

Supplier: Whatman products (Cytiva)

Whatman sterile MCE membrane filters from Cytiva's business are plain or gridded filters designed to support routine cell counting and particle detection.

Supplier: Whatman products (Cytiva)

Whatman mixed cellulose ester membranes are composed of cellulose acetate and cellulose nitrate. These membranes are characterized by a smoother and more uniform surface than pure nitrocellulose filters.

Supplier: Whatman products (Cytiva)

Cytiva's sterile Whatman MicroPlus-21 cellulose nitrate membrane filters are for microbiological quality control. The STL version is compatible with Membrane-Butler and other membrane filter dispensers.

Supplier: Thermo Fisher Scientific

Type 205: Cellulose nitrate, sterile. Certified to meet requirements of standard methods for water quality control for microbiological analysis, sterility tests, food and beverage testing. Individually wrapped.

Supplier: Whatman products (Cytiva)

Whatman mixed cellulose ester membranes are composed of cellulose acetate and cellulose nitrate. These membranes are characterized by a smoother and more uniform surface than pure nitrocellulose filters.

Supplier: Whatman products (Cytiva)

Whatman mixed cellulose ester membranes are composed of cellulose acetate and cellulose nitrate. These membranes are characterized by a smoother and more uniform surface than pure nitrocellulose filters.