Hai cercato: Filtri

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are specified for water pollution monitoring, cell harvesting, liquid scintillation counting and air pollution monitoring. They are often used in total suspended solids analysis.

Supplier: Merck

Filters for sterilising or clarifying biological solutions. The larger filtration area increases flow rate and throughput. It also makes it easier to filter solutions because it reduces the pressure required to empty the syringe.

Supplier: Cytiva (Formerly Pall Lab)

Ideale per la ventilazione di bioreattori, vasche di fermentazione e bottiglioni. Eliminazione di gas sterile da beute di coltura. Ideale per il collegamento a sistemi monouso che devono essere sterilizzati con raggi gamma.

Supplier: Merck

HPLC certified filters for the filtration of organic and aqueous solutions in HPLC.

Supplier: Cytiva (Formerly Pall Lab)

The new Acrodisc® One and Acrodisc® PSF premium syringe filters combine the benefits of a multi-layered prefiltration device with an automation-certified filter housing.

Supplier: Merck

Filters for sterilising or clarifying biological solutions. The larger filtration area increases flow rate and throughput. It also makes it easier to filter solutions because it reduces the pressure required to empty the syringe.

Supplier: Merck

HPLC certified filters for the filtration of organic and aqueous solutions in HPLC.

Supplier: Merck

Work with ease and filter with confidence with Stericup® and Steritop® filtration systems. The Stericup® E and Steritop® E sterile filters have been designed to reduce plastic and packaging.

Supplier: Merck

Filters for sterilising or clarifying biological solutions. The larger filtration area increases flow rate and throughput. It also makes it easier to filter solutions because it reduces the pressure required to empty the syringe.

Supplier: Sartorius

Per campioni fino a 500 µl; membrana: cellulosa rigenerata Hydrosart®. Concentratori centrifughi Vivacon® 500 ideati per concentrazione e rebuffering di DNA e proteine. Sono caratterizzati dal design orizzontale a membrana, preferito da alcuni utenti per ragioni di riproducibilità e di uniformità con le procedure precedentemente utilizzate.

Supplier: Sartorius

Vivaspin® Turbo 15 Regenerated Cellulose (RC) membrane, ultrafiltration centrifugal concentrators for protein, DNA, nanoparticle and virus concentration for 4 to 15 ml sample volumes.

Supplier: Merck

Millex® Filters for the Samplicity® G2 System

Supplier: Thermo Fisher Scientific

Rapid-Flow™ disposable filter units feature the exclusive Rapid-Flow support column design, providing fast flow rates and high throughput. The last line of defense against cell culture contamination.

Supplier: Sartorius

For 2 to 15 ml, cellulose triacetate membrane. Disposable ultrafiltration device for endotoxin concentration and removal of substances interfering with the LAL test from liquid samples. The device is a spin column based ultrafiltration unit. It can effectively be used in swing bucket or fixed angle rotors accepting 50 ml conical bottom centrifuge tubes.

Supplier: Merck

Work with ease and filter with confidence with Stericup® and Steritop® filtration systems. The Stericup® E and Steritop® E sterile filters are designed as a greener alternative for vacuum sterile filtration that significantly reduces plastic and packaging.

Supplier: Whatman products (Cytiva)

HGF61 glass fibre tape provides strength, efficiency, reliability and consistency of data quality in continuous air monitoring.

Supplier: Sartorius

For 0,1 to 1000 ml, Hydrosart® membrane. Vivaflow 50R is a ready to use and reusable laboratory crossflow cassette for applications like cell culture supernatant concentration, virus concentration and water sample concentration. The thin channel, flip flow recirculation path of the modules provides high crossflow velocities with minimum pump speed requirements. A single module with 50 cm² active membrane area typically concentrates 250 ml by a factor of 20 in less than 30 min.

Supplier: Whatman products (Cytiva)

GMF 150 prefilters are multilayer graded density filters for rapid and efficient filtration of samples with high solids content. They are designed with a course top layer (10 µm) and meshed with a finer layer of 1 or 2 µm. Manufactured from 100% borosilicate glass microfibre, the filter is binder free. It is an excellent prefilter for higher particulate loading capacity with faster flow rates.

Supplier: Whatman products (Cytiva)

These EPM 2000 air filters are used in high volume PM-10 sampling equipment. Manufactured from 100% pure borosilicate glass, they enable detailed chemical analysis of trace pollutants with minimal interference.

Supplier: Merck

Automation compatible filter units are specially designed to provide efficient filtration for dissolution and other automated sample preparation applications.

Supplier: Merck

A 50 mm diameter non-sterile syringe filter with a 2 µm pore size glass fiber membrane.

Supplier: Merck

The Stericap™ PLUS Universal bottle-top filter device with Millipore Express® PLUS membrane provides fast vacuum filtration and low protein binding without the need for a prefilter in most cases. It filters quickly, without clogging, even viscous solutions typical of serum-containing media. This non-cytotoxic, non-pyrogenic device can be used to fill any vacuum-rated bottle or other container with an inner neck diameter of 20 to 67 mm. This allows maximum versatility, capacity, speed, and flowthrough efficiency when you need to filter larger volumes into containers with openings of various sizes.

Supplier: Merck

Automation compatible filter units are specially designed to provide efficient filtration for dissolution and other automated sample preparation applications.

Supplier: Merck

Millex-HV Syringe Filter with PVDF Membrane bind far less protein than nylon, nitrocellulose membranes, or PTFE membranes. High flow rates and throughput, low levels of extractables and broad chemical compatibility.

Supplier: Merck

Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of samples improves the quality and consistency of analytical results and decreases instrument downtime.

Supplier: Merck

The Steriflip® filter unit performs vacuum assisted, closed system ensures sample sterility while enabling fast separation of large volumes of cellular material for efficient recoveries. It also eliminates messy pouring during sample transfer. Filters come in different pore sizes that are ideal for cell isolation.

Supplier: Merck

The Steriflip® filter unit performs vacuum assisted, closed system ensures sample sterility while enabling fast separation of large volumes of cellular material for efficient recoveries. It also eliminates messy pouring during sample transfer. Filters come in different pore sizes that are ideal for cell isolation.

Supplier: Thermo Fisher Scientific

These filters are particularly useful for large volume microbiological QC samples.

Supplier: Thermo Fisher Scientific

Pierce™ Ni-NTA spin columns contain a high-capacity, high-performance nickel-IMAC resin for routine affinity purification of His-tagged fusion proteins.

Supplier: Merck

Automation compatible filter units are specially designed to provide efficient filtration for dissolution and other automated sample preparation applications.