Supplier: Avantor Fluid Handling

Protect products and expensive process equipment from coarse or fine particulates.

Supplier: Avantor Fluid Handling

Protect pump from sediments filtering into suction line.

Supplier: MOTIC

Blue filter for FBGG/2111 stand (Ø = 42 mm)

Supplier: Lovibond Tintometer

Lovibond®, Filter set red, yellow, blue, with 5 filtersl

Supplier: Sartorius

Vivapure® Ion Exchange (IEX) spin colums are centrifugal devices. They incorporate Sartobind membrane adsorber technology as their chromatography matrix. Sartobind IEX membrane adsorbers are based on stabilised regenerated cellulose and display a microporous structure with a pore size of >3 μm, which is orders of magnitude larger than conventional chromatographic gel materials.

Supplier: Whatman products (Cytiva)

These Polycap™ GW (Ground Water) capsule filters are specifically designed for sample preparation of ground water samples for dissolved metals analysis. The in-line design with stepped hose barbs and hydrophilic polyethersulfone (PES) membrane make it easy to use for field sampling.

Supplier: Thermo Fisher Scientific

This in-line filter removes contamination from gas with easy-to-use filters. Reuseable end-fittings containing needle valves remain installed during filter changes, preventing contamination and reducing the cost of clean gas.

Supplier: Socorex Isba

Filtro in linea, Conf: 50

Supplier: Sartorius

Sartofluor® MidiCaps® and Capsules are self contained, ready to use, sterile filter units for sterilising grade filtration in the pharmaceutical and biotechnology industry. Their unique hydrophobic PTFE membrane is ideally suited for particle removal and sterilising grade filtration of gases and for filtration of highly aggressive liquids like solvents, acids and bases.

Supplier: Cytiva (Formerly Pall Lab)

The HDC II filter medium is comprised of a high performance pleated cartridge with a polypropylene filter medium.

Supplier: PEAK SCIENTIFIC

The AD70L is a useful attachment for any laboratory's external source of air, removing moisture and ensuring dry air delivery. Moisture content in house air can contaminate laboratory instrumentation, impacting on results and in some cases damaging the instrument itself.

Supplier: PEAK SCIENTIFIC

The PG14L gas generator is suitable for laboratory detectors requiring CO₂ free gas such as FT-IR analysis. Using Pressure Swing Adsorption technology organic contaminants and moisture from air are removed.

Supplier: Merck

These ready to use, disposable groundwater sampling capsules are used for lowest detectable level (LDL) analyses for 67 metals and 2 anions. The housing materials and low-extractable filter minimise background during sample analysis.

Supplier: Avantor Fluid Handling

Easily customize strainer system to suit your application.

Supplier: Avantor Fluid Handling

Protect products and expensive process equipment from coarse or fine particulates.

Supplier: Whatman products (Cytiva)

QM-C 100% quartz microfiber filter paper features low trace metals and high temperature resistance. It is well-suited for heavy metal analysis of particulate matter and sampling of acidic gases, stacks, flues and aerosols in air monitors.

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: Thermo Fisher Scientific

These filters can be easily replaced without tools.

Supplier: Cytiva (Formerly Pall Lab)

Filtration capsules for high airflow rate venting applications. Also useful for aggressive solvent filtration.

Supplier: Avantor

These filters are made from 100% PEEK.

Supplier: Cytiva (Formerly Pall Lab)

Scalable capsules with PP housing and vent and Seitz® high performance depth filter media. Supracap™ 50 capsules are designed for developing and optimising a process during scale-up and scale-down studies. They can be used to quickly and accurately determine which series and grade of depth filter media will provide the best performance as well as the necessary filtration area required to meet process volume.

Supplier: 3M MEDICAL

3M™ Emphaze AEX Hybrid Purifier is our single-use sterilisable and sanitisable. The all-synthetic purification media that contains a Q-functional anion exchange media and a fine particle and bioburden reduction membrane.

Supplier: Cytiva (Formerly Pall Lab)

A filter for every step in your process. From drug discovery and basic research to process development, Pall Laboratory's AcroPak capsules come in a variety of membrane types and volume sizes.

Supplier: Sartorius

Sartobind® Protein A syringe filters are the ideal tool for rapid quantification of immunoglobulins (Ig). The large pore size allows ten times faster flow rate than conventional columns and a shorter operation time.

Supplier: Cytiva (Formerly Pall Lab)

These disposable capsules offer easy microfiltration for laboratories and small-volume processors.The pleated capsules combine the efficiency of a membrane disc filter with the large filtration capacity of a pleated surface.

Supplier: Whatman products (Cytiva)

HEPA-VENT in-line disk filters are convenient, disposable, light-weight filters with high-efficiency glass fiber media for maximum particle retention.

Supplier: Sartorius

Sartoclear Dynamics® Lab V kits enable clarification and sterile filtration to be performed in a single step.

Supplier: Whatman products (Cytiva)

Whatman PolyVENT disc filters are integral venting filters that work bidirectionally to prevent contamination from entering containers like fermentation vessels during incubation.

Supplier: Avantor

The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.

Supplier: Cytiva (Formerly Pall Lab)

Le capsule Aquaprep™ 600 sono state concepite per la preparazione di campioni di acqua freatica per l'analisi di metalli disciolti. Su ogni confezione è stampato un certificato di analisi per 42 metalli.