386 Résultats pour : "OMNIFIT"

Supplier: OMNIFIT

Valves are constructed from PTFE with a PCTFE rotor and have a 1,5 mm bore size. They accept tubing sizes between 0,5 and 4 mm Ext.Ø. and are pressure rated to 50 psi.

Supplier: OMNIFIT

Omnifit® threaded adaptors are a useful range of problem solving parts that enable to convert thread sizes quickly and easily, accepting a ¹/₄"-28 UNF male fitting at one end and a range of male and female thread types at the other.

Supplier: OMNIFIT

PTFE, white.

Supplier: OMNIFIT

Snap ring seals, PE, Ø: 11 mm, Type: PE transparent, hard version, Dureté: 45° shore A, Septum: Silicone white/PTFE red, Épaisseur: 1,3 mm

Supplier: OMNIFIT

The Omnifit® labware bubble trap is made of PEEK. It effectively removes bubbles from aqueous solutions. The units are connected in-line, downstream of a pump, using 28 UNF threaded fittings (6,35 mm), such as Omni-Lok™.

Supplier: OMNIFIT

EZ SolventPlus™ columns are designed for maximum chemical compatibility. Borosilicate glass and PTFE construction, with Chemraz® o-rings and PTFE frits, only the most inert materials are present in the fluid path. ETFE end caps and fitting nuts ensure a chemically inert connection into and out of the system.

Supplier: OMNIFIT

Replacement endpieces, fixed, 6,6 mm

Supplier: OMNIFIT

Tubing cutter

Supplier: OMNIFIT

Bouchon pour flacon de chromatographie, Aluminium, Ø: 11 mm, Type: Clear lacquered, centre hole, Dureté: 45°, Septum: White silicone/red PTFE, Épaisseur: 1,3 mm

Supplier: OMNIFIT

Outer PP cap with PTFE inner body.

Supplier: OMNIFIT

The high pressure manual rotary valves are made from PTFE with a PCTFE rotor with a bore size of 0,8 mm making them ideal for pressure applications up to 500 psi. They are available in four and five port versions. All ports are 1/4"-28 UNF flat-bottom and will accept any 1/4"-28 UNF male fitting. These valves are mountable using the pre-drilled M3 mounting holes.

Supplier: OMNIFIT

Replacement endpieces, adjustable, 15 mm

Supplier: OMNIFIT

EZ columns are designed to suit the majority of standard laboratory chromatography applications. They are ideal for aqueous systems and compatible with solvents used in common liquid chromatography applications such as protein purification.

Supplier: OMNIFIT

Flanged tubing system is used for economical low pressure connection. A flanging washer is placed between the flange and the fitting nut. When screwed into a flat-bottom, the flange is compressesed against the bottom of the port to produce a seal.

Supplier: OMNIFIT

Omni-Lok™ inverted cone fittings provide a simple, easy to use low-pressure connection. Only the ETFE cone is in the fluid path.

Supplier: OMNIFIT

Outer PP cap, inner PTFE body.

Supplier: OMNIFIT

Universal replacement parts for all Omnifit® labware columns which gives complete flexibility to replace lost or worn parts. Compatible with BenchMark, SolventPlus and HiT column ranges.

Supplier: OMNIFIT

Pinces, Écrou de pince, PEEK, pour tubes de 1/16", PEEK

Supplier: OMNIFIT

Standard vial with flat bottom.

Supplier: OMNIFIT

[EN]BOTTLE CAP,3 VALVE 1 * 1 Pce

Supplier: OMNIFIT

[EN]BOTTLE CAP,GL45,2WAY VALVE 1 * 1 Pce

Supplier: OMNIFIT

[EN]DIBA OMNIFIT EZ REPLAC. GLASS 5X330M 1 * 1 Pce

Supplier: OMNIFIT

[EN]EZ COLUMN 50X330MM 2A 1 * 1 Pce

Supplier: OMNIFIT

[EN]EZ COLUMN 10 X 100MM 1 * 1 Pce

Supplier: OMNIFIT

[EN]2,2,4,4,5,5 – HEXABROMOBIPHENYL 1 * 5 mg

Supplier: OMNIFIT

[EN]9-Port Waste Manifold PP Disconnect 1 * 1 Pce

Supplier: OMNIFIT

[EN]COLUMN ASSEMBLY 25MM BORE X150MM LEN 1 * 1 Un.

Supplier: OMNIFIT

Bouchon pp vert 1 * 10 Pce

Supplier: OMNIFIT

[EN]FRIT PTFE 50 MICRON 15MM 1 * 20 Pce

Supplier: OMNIFIT

Colonne Solvent Plus 15mm interne, longueur 250mm - 1 lment de fermeture fixe - 1 lment de fermeture rglable 1 * 1 Pce