6950 Résultats pour : "Liners+gc+septa+gc+ferrules"

Supplier: Trajan Scientific and Medical

Les ferrules pour colonnes de 0,1 - 0,25 mm de diamètre interne présentent des orifices de 0,4 mm. Les ferrules pour colonnes de 0,32 mm de diamètre interne présentent des orifices de 0,5 mm. Les ferrules pour colonnes de 0,53 mm présentent des orifices de 0,8 mm.

Supplier: Merck

Wool plugs are often used in GC inlet liners to improve sample vaporization, and/or to keep non-volatile material from entering the column. They can also be used in packed GC columns, solvent desorption tubes, thermal desorption tubes, and purge traps to retain packed beds.

Supplier: Merck

The Discovery® HS C18 columns provide the best suitable selectivity for many applications.

Supplier: Merck

FocusLiner™ inlet liners are designed with wool plug to promote the rapid vaporisation of the entire sample, minimise mass discrimination, and prevent non-volatile material from entering the column. It incorporates a unique design to prevent the shifting of the wool plug during repeated injections or sudden inlet pressure changes. These liners are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.

Supplier: Merck

Discovery® BIO Wide Pore reversed-phase columns satisfy the need for efficiency, selectivity, scalability, and reproducibility for RP HPLC analyses of proteins, peptides, and small biomolecules.

Supplier: Trajan Scientific and Medical

Revêtements désactivés pour injecteurs optiques ATAS.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Merck

Ascentis® C18 HPLC columns are optimised to the three terms of the resolution equation: efficiency, retention, and selectivity. The classical C18 column is suitable for any method that specifies a C18-type column.

Supplier: Trajan Scientific and Medical

Conçues pour être installées par simple pression des doigts ; une installation aisée et sans fuite des colonnes capillaires, sans aucun outil. Dotée des propriétés d'étanchéité uniques des ferrules SilTite™ avec une étanchéité à l'air supérieure permettant de réduire le bruit de fond dans les applications MS sensibles.

Supplier: Merck

The Discovery® HS F5 (PFP) HPLC Column provides excellent peak shape and stable, low-bleed LC-MS separation.

Supplier: Trajan Scientific and Medical

Mechanical Seals, Graphite , Graphite seal for Thermo Finnigan trace GC, 5 mm Int. Ø

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Merck

Discovery® BIO Wide Pore reversed-phase columns satisfy the need for efficiency, selectivity, scalability, and reproducibility for RP HPLC analyses of proteins, peptides, and small biomolecules.

Supplier: Trajan Scientific and Medical

Seringues pour passeurs pour HP7673, 7683, 7693A et 6850ALS.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Trajan Scientific and Medical

* étanche aux gaz

Supplier: Trajan Scientific and Medical

Diviseurs à sortie fixe pour colonnes capillaires
Le diviseur à sortie fixe est recommandé pour diviser le flux provenant d'une colonne capillaire entre deux détecteurs. Le kit est constitué d'un raccord diviseur spécial Glass Lined Tubing (GLT™), de tubes et de toutes les ferrules nécessaires à l'installation.

Supplier: DWK Life Sciences

Replacement GL 45 PTFE coated high-temperature silicone cap liner for the aluminium cap.

Supplier: VWR Collection

VWR®, Bouchon pour flacon de chromatographie, Crimp caps with septa, open top, Dureté: 53° shore A, Septum: PTFE liner, Épaisseur: 0,25 mm

Supplier: Trajan Scientific and Medical

GLT™ (Glass Lined Tubing) is made by fusing a borosilicate glass lining onto the inside surface of stainless steel tubing. Ideal for HPLC columns, especially biological matrices, GC/MS interfaces, FTIR transfer lines, inlet liners, tee pieces and unions, thermal desorption tubes and SFC.

Supplier: HAMILTON BONADUZ

Long Life GC autosampler septa are designed for use with GC autosamplers.

Supplier: MACHEREY-NAGEL

GC septa with premium HT and standard quality.

Supplier: Trajan Scientific and Medical

Seringues pour passeurs pour PerkinElmer AutoSystem.

Supplier: HAMILTON BONADUZ

These preconditioned PTFE/silicone rubber septa are 3,175 mm thick.

Supplier: HAMILTON BONADUZ

These preconditioned silicone rubber septa are 3,81 mm thick.

Supplier: VWR Collection

VWR®, Bouchon pour flacon de chromatographie, PP, Screw caps, open top, Dureté: －, Septum: Aluminium liner (sealed by TPF O-ring), Épaisseur: 0,1 mm

Supplier: CHROMACOL

The CHROMSEAL 9001 autosampler septa are designed for use with GC autosamplers.

Supplier: Thermo Fisher Scientific

Made of low-bleed silicone, these septa have excellent mechanical properties and are ideal for demanding GC-MS applications.