6950 Résultats pour : "Liners+gc+septa+gc+ferrules"

Supplier: Trajan Scientific and Medical

Graphite ferrules are commonly used in GC systems on the inlet and detector ends because they don’t stick to the column, and can be removed and reinserted easily. They should not be used with GC/MS instruments because of permeability to air.

Supplier: Trajan Scientific and Medical

Seringues pour passeurs. Pour AOC14, AOC17 & AOC20

Supplier: Trajan Scientific and Medical

These GC ferrules are made from 100% PTFE. They are soft, completely inert, and have very low friction.

Supplier: Merck

Ready to use GC septa for inlet temperature of up to 100 to 350 °C.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: Merck

Inlet liners used in an GC require an O-ring placed near the top for proper operation. This O-ring ensures that the only path for carrier gas to get to the outside of the inlet liner is through the grooves in the inlet seal at the bottom of the injection port.

Supplier: Trajan Scientific and Medical

Advanced Green 3 low-bleed GC septa is a premium septa for autosamplers in all critical analyses.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: Trajan Scientific and Medical

Vespel/graphite GC ferrules are made from quality polyimide/graphite blend. They seal with minimal torque and can be reused and repositioned along capillary columns if not over compressed in the fitting. Due to slight shrinking at high temperatures, they must be retightened after initial temperature cycles to avoid leaks.

Supplier: Merck

These septa are suitable for use with 50 to 300 °C inlet temperatures.

Supplier: Trajan Scientific and Medical

Reliabily against the carrier gas pressure in the inlet. Capable of being pierced and resealing time after time without pieces of the septa being deposited in the GC inlet system. Does not contaminate or bleed material into the chromatographic system.

Supplier: Trajan Scientific and Medical

Endura-Seals are the CRS alternative to typical silicone-rubber injection port septa for gas chromatography. They work in a 2 part sealing system that includes the septa and the sealing nut.

Supplier: Trajan Scientific and Medical

Marathon long-life center guide GC septa are ideal for standard manual injection GC and GC/MS.

Supplier: Merck

SPME-GC inlet liners are designed for optimum sample introduction for specific injection techniques that are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.

Supplier: Trajan Scientific and Medical

Septa, BTO premium high-temperature GC septa, Ø: 6,4 mm, Temp. max.: 400 °C

Supplier: VWR Collection

La plupart des septa sont laminés d'un côté avec du PTFE (haute résistance chimique) et forment une barrière inerte entre le support et l'échantillon.

Supplier: Trajan Scientific and Medical

General purpose blue GC septa, maded of silicone combines significantly longer injection life, low bleed and low injection port adhesion.

Supplier: Trajan Scientific and Medical

Les bagues GC Vespel sont fabriquées à 100 % en polyimide haute température, un matériau polymère dur qui tend à se sceller de façon permanente aux colonnes capillaires lorsqu'il est utilisé. Un couple ferme est nécessaire pour comprimer et sceller.

Supplier: Trajan Scientific and Medical

Options du dispositif à microcanaux (MCD, microchannel device) SilFlow™ pour diviseurs GC 3 ports, diviseurs GC 4 ports et MCD pour commutateur de Deans, parfait pour les analyses multidimensionnelles. SilFlow™ peut être incorporé dans le système sans affecter la chromatographie.

Supplier: Merck

Ascentis® Silica HPLC columns for the classic use in normal phase HPLC.

Supplier: Merck

The Discovery® C8 columns provide the best suitable selectivity for many applications.

Supplier: Merck

Ascentis® C8 HPLC columns are optimised to the three terms of the resolution equation: efficiency, retention, and selectivity.

Supplier: Trajan Scientific and Medical

Raccord pour colonne, Mini raccord à ferrule en graphite/Vespel®, raccord de 0,3 mm de diamètre interne, livré avec des ferrules de 0,3 mm

Supplier: Merck

Ascentis®Phenyl HPLC columns are optimised to the three terms of the resolution equation: efficiency, retention, and selectivity.

Supplier: Merck

The Discovery® RP-Amide C16 HPLC Column with unique retention and selectivity.

Supplier: Trajan Scientific and Medical

Revêtements désactivés pour GC DANI.

Supplier: Merck

The Discovery® HS C18 columns provide the best suitable selectivity for many applications.

Supplier: Merck

Ascentis® RP-Amide HPLC columns are optimised to the three terms of the resolution equation: efficiency, retention, and selectivity.

Supplier: Trajan Scientific and Medical

* étanche aux gaz

Supplier: Merck

FocusLiner™ inlet liners are designed with wool plug to promote the rapid vaporisation of the entire sample, minimise mass discrimination, and prevent non-volatile material from entering the column. It incorporates a unique design to prevent the shifting of the wool plug during repeated injections or sudden inlet pressure changes. These liners are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.