1172 Résultats pour : "Industrial Physics"

Supplier: Industrial Physics

The metal sheet and coil coating cure profiler monitors the temperature profile of the coil strip at various points across its width as it is fed through the oven.

Supplier: Industrial Physics

Small and elegant clamp-type probes to measure temperature of any object.

Supplier: Industrial Physics

Clamp-type probes to measure object temperature (480 °C).

Supplier: Industrial Physics

The Colorbox is used to provide the illumination conditions for any visual inspection at a 45° angle.

Supplier: Industrial Physics

The SSPC is using visual reference, that features over 50 full colour pictures of (coated and uncoated) rusted steel surfaces, before and after dry abrasive blast cleaning.

Supplier: Industrial Physics

Temperature gradient plate for determining minimum film forming temperature (MFFT) test. The instrument can be used to define the white point/glass transition temperature of dispersion materials, synthetic resins, enamels and the blocking power and stacking capability of coated papers, foils, prints.

Supplier: Industrial Physics

This ceramic coated hotplate stirrer has high chemical and acid resistance.

Supplier: Industrial Physics

The TQC Cross Cut adhesion test kit (Master Paint Plate) is a stainless steel measuring tool that features: a 1, 1,5, 2 and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.

Supplier: Industrial Physics

Hammer used to test the quality of concrete, as well as other construction materials, for analysing resistance.

Supplier: Industrial Physics

Durometers for measuring impression hardness of soft materials.

Supplier: Industrial Physics

Easy to use digital sound level meter with wide dynamic range, 30 to 130 dB in the frequency range 31,5 Hz to 8 kHz

Supplier: Industrial Physics

Infrared thermometer standard is designed to measure surface temperatures without making contact under harsh industrial conditions.

Supplier: Industrial Physics

Drying time recorder tool can be used as an optional test tool for the automatic film applicators. This device allows the user to accurately define the drying time of various types of coatings within the time range of 1 minute to 48 hours. The drying time recorder option can be easily clamped on any standard automatic film applicator with firmware 2,01 and above.

Supplier: Industrial Physics

These Bend Test Mandrels are designed to bend coated panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating, paint or varnish to cracking, elongation and/or detachment from a metal test panel.

Supplier: Industrial Physics

Surface profile roughness gauge for ultrafast measurement of the peaks and valleys of a surface.

Supplier: Industrial Physics

RAL book colours for hotels.

Supplier: Industrial Physics

Ces mires sont utilisées pour tester les propriétés physiques des revêtements, laques, et encres.

Supplier: Industrial Physics

This replica tape is specifically designed to measure blasted surfaces. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profile can be taken and measured.

Supplier: Industrial Physics

Fully waterproof, floating pH tester with large display. The modular design makes it extremely easy to change electrodes.

Supplier: Industrial Physics

The GasAlert MicroClip offers simultaneous monitoring of two gasses (O₂, LEL) in a rugged compact case for confined areas.

Supplier: Industrial Physics

This thickness gauge is designed for the measurement of non magnetic coatings include paint, enamel, plating, hot-dip galvanising on steel. A small magnet can be placed with pin-point accuracy on small parts and on peaks and valleys.

Supplier: Industrial Physics

The quality of pretreatment prior to application of the coating is essential to the quality of the coating. This pretreatment set is designed for all the parameters during the pretreatment of steel prior to painting.

Supplier: Industrial Physics

Ring-type surface probes to measure object temperature.

Supplier: Industrial Physics

Magnet probes to measure object temperature, fitted with an ultra strong magnet, but still with a very low mass and size.

Supplier: Industrial Physics

These hardness tests are pocket instruments for testing the hardness and wear/scratch resistance of materials such as coatings, lacquers, plastics or related products.

Supplier: Industrial Physics

Ces testeurs d'impacts sont utilisés afin de déterminer la résistance aux chocs et la flexibilité des matériaux.

Supplier: Industrial Physics

Le test d'indentation Buchholz pour la mesure de la dureté est une méthode d'indentation de couches uniques ou de plusieurs couches de peinture, de vernis ou autres.

Supplier: Industrial Physics

Equipment developed to measure the resistivity of paints, varnishes and liquids in a fast and precise way. Indispensable for the correct functioning of electrostatic paint installations.

Supplier: Industrial Physics

These clamp-type probes can be used to measure air temperature.

Supplier: Industrial Physics

Kit acier de qualité pour jauges d'épaisseur.