22912 Results for: "Furnace Cap Hood"

Supplier: Heidolph Instruments GmbH & Co.KG

Flat hood

Supplier: NABERTHERM

Hardening boxes are suitable for heat treatment under protective gas and are equipped with a protective gas intlet and outlet. For furnace models such as N 61/H with downward opening doors, the gas ductway is laid through the upper section of the door collar and for larger furnaces with upward opening doors, the supply line is laid through the lower furnace collar.

Supplier: KOETTERMANN

The pharmacy hood is a small hood, which was developed especially for the handling of hazardous substances in pharmacies. It complies with the requirements of section 4 (2) of the German Pharmacies Act and is ideally suited for handling dusty compounds or volatile chemicals. These hoods have been designed for safe handling of chemicals, mineral acids, concentrated and heated acids.

Supplier: ERLAB CAPTAIRE

Benchcap™, fixed work bench without worksurface for XLS633

Supplier: RPB SAFETY

The RPB T200 is a lightweight multi-purpose respirator designed specifically for the healthcare and life science industries, relieving workers of breathing difficulties and fatigue experienced with N95 use. Available with either a head harness or bump cap for head protection and multiple hood options, the T200 has the ability to adapt to different environments that need face protection and respiratory protection.

Supplier: NABERTHERM

The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces good all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved, depending on the furnace model and the conditions of use.

Supplier: NABERTHERM

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, make these tube furnaces suitable for integration into existing process systems.

Supplier: LABCONCO

Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg, Pour: Laboratory Hoods, Fiberglass 30

Supplier: NABERTHERM

These forced convection chamber furnaces provide good temperature uniformity. Due to their compact benchtop design, this series is very well suited for use in laboratories or areas with limited space.

Supplier: ERLAB CAPTAIRE

Accessoire pour hotte sans raccordement, Front panel

Supplier: LABCONCO

Organic carbon filters for Protector® work stations with built-in blower, 5,4 kg, 457×914×250 mm

Supplier: Bel-Art Products, a Part of SP

Benchtop fume hood designed for small facilities or installations in which a number of fume hoods are needed, this unit is mainly used in schools, junior colleges and universities.

Supplier: Bohlender

Anodized aluminium frame with panels made of polycarbonate.

Supplier: LABCONCO

The Basic™ hood is ideal for rooms with ceilings below 2,4 m, 203,2 mm and for shallow countertops with 200 V,50 Hz

Supplier: LABCONCO

Oval cupsink, PP, 1,5” NPSM thread, mounts in work surface with cupsink cutout, 76×152 mm

Supplier: NABERTHERM

Accessoires pour fours à moufle, L 1/11-L 40/12 et LE 1/11-LE 14/11

Supplier: LABCONCO

Solid epoxy work surface, flat, no cupsink cutout for 4 inch width hood, enclosures, glove boxes, 1220×760×30 mm, 61 kg

Supplier: Bel-Art Products, a Part of SP

Scienceware® Clear View fume hoods are suitable for potentially hazardous fumes and dust. It is constructed of polycarbonate with sleek modern style.

Supplier: LABCONCO

Ductless ventilation systems with glass tops and sides and low profiles are well suited for educational settings. Clean-Sweep air foil and zone-perforated rear baffle maximise containment.

Supplier: NABERTHERM

The L 3/11 - L 40/11 muffle furnaces are the ideal choice for daily laboratory use. These high quality models have an advanced and attractive design, and are very reliable. The muffle furnaces have a lift up door as standard.

Supplier: LABCONCO

The PVC acid digester Protector® laboratory hoods are strong acid resistant. Their liners are made up of unplasticised polyvinyl chloride.

Supplier: asecos

Powder coated steel tube with wall mount and flat hoods. Can be easily fastened onto workbenches, tables. It can be easily adjustable has suction valve with swivel function.

Supplier: VWR Collection

This flat hood is made from Quantus® Comfort fabric which is a high quality polyester fabric (100% polyester weave with conductive yarn) designed for critical cleanroom applications. The fabric provides a very high wearing comfort and at the same time a great barrier against particles (98% for airborne particles >0,3 μm).

Supplier: NABERTHERM

These compact tube furnaces with a SiC rod heating and integrated switchgear with controller can be used universally for many processes. They represent an inexpensive variant in the high-temperature range. The standard mounting options for accessories make them flexible for use in a wide range of applications.

Supplier: NABERTHERM

The L 9/11 SKM muffle furnaces are recommended for applications involving aggressive substances. The furnace has a ceramic muffle with embedded heating from four sides. The muffle furnace has very good temperature uniformity and the heating elements are protected from aggressive atmospheres. Another aspect is the smooth, nearly particle free muffle (furnace door made of fibre insulation), an important quality feature for some ashing processes.

Supplier: CleanAir by Baker

Châssis de soutien pour DLF 460, revêtement en époxy, hauteur de travail de 900 mm

Supplier: CleanAir by Baker

Prise triple (D/NL/TR)

Supplier: LABCONCO

The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

Supplier: Thermo Fisher Scientific

Carbon black ≥99.9%, acétylène, comprimé à 50%

Supplier: S.C.A.T.

SCAT Safety waste caps are hermetically sealing caps for the safe disposal of solvents and HPLC waste.